automated-lipid-bilayer-membrane-formation-using-polydimethylsiloxane

Automated Lipid Bilayer Membrane Formation Using a Polydimethylsiloxane Thin Film

An artificial lipid bilayer, or black lipid membrane (BLM), is a powerful tool for studying ion channels and protein interactions, as well as for ...

Inha University

An artificially created lipid bilayer is an important platform in studying ion channels and engineered biosensor applications. However, a lipid bilayer created using conventional techniques is fragile and short-lived, and the measurement of ion channels requires expertise and laborious procedures, precluding practical applications. Here, we demonstrate a storable droplet lipid bilayer precursor frozen with ion channels, resulting in a droplet interface bilayer upon thawing. A small vial with an aqueous droplet in organic solution was flash frozen in -80 °C methanol immediately after an aqueous droplet was introduced into the organic solution and gravity draws the droplet down to the interface upon thawing. A lipid bilayer created along the interface using this method had giga-ohm resistance and typical specific capacitance values. The noise level of this system is favorably comparable to the conventional system. The subsequent incorporation of ion channels, alpha-hemolysin and gramicidin A, showed typical conductance values consistent with those in previous literatures. This novel system to create a lipid bilayer as a whole can be automated from its manufacture to use and indefinitely stored when frozen. As a result, ion channel measurements can be carried out in any place, increasing the accessibility of ion channel studies as well as a number of applications, such as biosensors, ion channel drug screening, and biophysical studies.

Storable droplet interface lipid bilayers for cell-free ion channel studies.

A black lipid membrane (BLM) is a powerful platform for studying the electrophysiology of cell membranes as well as transmembrane proteins. However, BLMs have disadvantages in terms of stability, accessibility, and transportability, which preclude their industrial applications. To resolve these issues, frozen membrane precursor (MP) was devised to improve the transportability and storability of BLMs. As described previously, MP is a storable and transportable platform that can be delivered to the point-of-use, where BLMs are automatically formed upon thawing at room temperature. However, MP has an inconsistent thinning-out time, ranging from 30 min to 24 h, as well as a low success rate of BLM formation (~27%), which make it undesirable for practical use. In our study, polydimethylsiloxane (PDMS) was introduced as a replacement for conventionally used Teflon film to control thinning-out time. As such, we used a PDMS thin-film, a porous-structured hydrophobic polymer, and squalene, a high viscosity solvent, to facilitate membrane formation, whereas the absorption rates of solvents were controlled to achieve consistent BLM formation time. We successfully reduced thinning-out time down to <1 h as well as enhanced the success rate of BLM formation to greater than 80%. Moreover, we demonstrated the feasibility of our platform for use in drug screening using gramicidin A and guanidine.

Automated lipid membrane formation using a polydimethylsiloxane film for ion channel measurements.

Cl(-) transporters that bear a terminal ethynyl group were synthesized; they consist of non-pyrrolic hydrogen bond motifs such as phenolic OH, amide NH, and triazole CH. The ethynyl group of these non-pyrrolic analogs plays an important role in chloride efflux and they exhibit no significant cytotoxic activity.

Synthetic anion transporters that bear a terminal ethynyl group.

Ionic liquids (ILs) are considered to be green solvents because of their non-volatility. Although ILs are relatively safe in the atmospheric environment, they may be toxic in other environments. Our previous research showed that the cytotoxicity of ILs to biological organisms is attributable to interference with cell membranes by IL insertion. However, the effects of ILs on ion channels, which play important roles in cell homeostasis, have not been comprehensively studied to date. In this work, we studied the interactions between ILs and lipid bilayer membranes with gramicidin A ion channels. We used two methods, namely electrical and fluorescence measurements of ions that permeate the membrane. The lifetimes of channels were increased by all the ILs tested in this work via stabilizing the compressed structure of the lipid bilayer and the rate of ion flux through gA channels was decreased by changing the membrane surface charge. The former effect, which increased the rate of ion flux, was dominant at high salt concentrations, whereas the latter, which decreased the rate of ion flux, was dominant at low salt concentrations. The effects of ILs increased with increasing concentration and alkyl chain length. The experimental results were further studied using molecular dynamics simulations.

Sangbaek Choi

Department of Biological Engineering,
Biohybrid Systems Research Center (BSRC)

Inha University

Automated Lipid Bilayer Membrane Formation Using a Polydimethylsiloxane Thin Film

Sangbaek Choi

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Biological Engineering,Biohybrid Systems Research Center (BSRC)

Inha University

Automated Lipid Bilayer Membrane Formation Using a Polydimethylsiloxane Thin Film

Department of Biological Engineering,
Biohybrid Systems Research Center (BSRC)