initial-3d-cell-cluster-control-hybrid-gel-cube-device-for-repeatable

Initial 3D Cell Cluster Control in a Hybrid Gel Cube Device for Repeatable Pattern Formations

The importance of in vitro 3D cultures is considerably emphasized in cell/tissue culture. However, the lack of experimental repeatability is one of its ...

Kyushu Institute Of Technology

Kyushu Institute of Technology

In this paper, we propose a novel, magnetically driven microrobot equipped with a frame structure to measure the effects of stimulating aquatic microorganisms. The design and fabrication of the force-sensing structure with a displacement magnification mechanism based on beam deformation are described. The microrobot is composed of a Si-Ni hybrid structure constructed using micro-electro-mechanical system (MEMS) technologies. The microrobots with 5 μm-wide force sensors are actuated in a microfluidic chip by permanent magnets so that they can locally stimulate the microorganisms with the desired force within the stable environment of the closed microchip. They afford centimetre-order mobility (untethered drive) and millinewton-order forces (high power) as well as force-sensing. Finally, we apply the developed microrobots for the quantitative evaluation of the stimuation of Pleurosira laevis (P. laevis) and determine the relationship between the applied force and the response of a single cell.

On-chip microrobot for investigating the response of aquatic microorganisms to mechanical stimulation.

Small pulmonary tumors are difficult to localize during video-assisted thoracic surgery (VATS) because of lack of direct tissue contact. However, in partial lung resection, tumor localization is quite important. The aim of this study was to evaluate the safety and feasibility of a new noncontact sensor for detecting pulmonary nodules during VATS using human and porcine models.

New noncontact sensor for detecting pulmonary tumors during video-assisted thoracic surgery.

We propose a microrobotic platform for single motile microorganism observation and investigation. The platform utilizes a high-speed online vision sensor to realize real-time observation of a microorganism under a microscopic environment with a relatively high magnification ratio. A microfluidic chip was used to limit the vertical movement of the microorganism and reduce the tracking system complexity. We introduce a simple image processing method, which utilizes high-speed online vision characteristics and shows robustness against image noise to increase the overall tracking performance with low computational time consumption. The design also considers the future integration of a stimulation system using microtools. Successful long-time tracking of a freely swimming microorganism inside of a microfluidic chip for more than 30 min was achieved notwithstanding the presence of noises in the environment of the cell. The specific design of the platform, particularly the tracking system, is described, and the performance is evaluated and confirmed through basic experiments. The potential of the platform to apply mechanical stimulation to a freely swimming microorganism is demonstrated by using a 50-µm-thick microtool. The proposed platform can be used for long-term observation and to achieve different kinds of stimulations, which can induce new behavior of the cells and lead to unprecedented discoveries in biological fields.

Tomohiro Kawahara

Department of Biological Functions Engineering

Kyushu Institute Of Technology

Initial 3D Cell Cluster Control in a Hybrid Gel Cube Device for Repeatable Pattern Formations

Tomohiro Kawahara

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Biological Functions Engineering

Kyushu Institute Of Technology

Initial 3D Cell Cluster Control in a Hybrid Gel Cube Device for Repeatable Pattern Formations

Department of Biological Functions Engineering