Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

For over 30 years, carbon-fiber microelectrodes (CFMEs) have been the standard for neurotransmitter detection. Generally, carbon fibers are aspirated into ...

American University

Reactions coupled to palladium.

We present a novel synthesis in which hemoglobin and Fe(2+) react, in the presence of KNO3 and KOH, to produce protein microgels that contain magnetic iron oxide nanoparticles. The synthesis results in microgels with polymer properties (denaturing and glass transition temperatures) that are consistent with the dried protein. The iron oxide nanoparticles that exhibit an average diameter of 22nm, are ferrimagnetic, and display properties consistent with Fe3O4. The multiple functional capabilities displayed by these materials: biocompatibility, magnetism, dye uptake and controlled release, and other properties archetypal of hydrogels, will make the magnetic hydrogels attractive for a number of biomedical applications.

Protein-based ferrogels.

To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO compositions of 1%, 5%, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO during the different processing steps. The measured mechanical properties (strain and Young's modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures.

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO-ABS nanocomposites.

A technique was developed for preparing a novel material that consists of gold nanoparticles trapped within a fiber of unfolded proteins. These fibers are made in an aqueous solution that contains HAuCl and the protein, bovine serum albumin (BSA). By changing the ratio of gold to BSA in solution, two different types of outcomes are observed. At lower gold to BSA ratios (30-120), a purple solution results after heating the mixture at 80 °C for 4 h. At higher gold to BSA ratios (130-170), a clear solution containing purple fibers results after heating the mixture at 80 °C for 4 h. UV-Vis spectroscopy and light scattering techniques show growth in nanocolloid size as gold to BSA ratio rises above 100. Data indicate that, for the higher gold to BSA ratios, the gold is sequestered within the solid material. The material mass, visible by eye, appears to be an aggregation of smaller individual fibers. Scanning electron microscopy and transmission electron microscopy indicate that these fibers are primarily one-dimensional aggregates, which can display some branching, and can be as narrow as 400 nm in size. The likely mechanism for the synthesis of the novel material is discussed.

Concurrent zero-dimensional and one-dimensional biomineralization of gold from a solution of Au and bovine serum albumin.

Hop to It.

Emerging applications that exploit the properties of nanoparticles for biotechnology require that the nanoparticles be biocompatible or support biological recognition. These types of particles can be produced through syntheses that involve biologically relevant molecules (proteins or natural extracts, for example). Many of the protocols that rely on these molecules are performed without a clear understanding of the mechanism by which the materials are produced. We have investigated a previously described reaction in which gold nanoparticles are produced from the reaction of chloroauric acid and proteins in solution. We find that modifications to the starting conditions can alter the product from the expected solution-suspended colloids to a product where colloids are formed within a solid, fibrous protein structure. We have interrogated this synthesis, exploiting the change in products to better understand this reaction. We have evaluated the kinetics and products for 7 different proteins over a range of concentrations and temperatures. The key factor that controls the synthetic outcome (colloid or fiber) is the concentration of the protein relative to the gold concentration. We find that the observed fibrous structures are more likely to form at low protein concentrations and when hydrophilic proteins are used. An analysis of the reaction kinetics shows that AuNP formation occurs faster at lower protein (fiber-forming) concentrations than at higher protein (colloid-forming) concentrations. These results contradict traditional expectations for reaction kinetics and protein-fiber formation and are instructive of the manner in which proteins template gold nanoparticle production.

Protein-templated gold nanoparticle synthesis: protein organization, controlled gold sequestration, and unexpected reaction products.

Chemistry researchers are frequently evaluated on the perceived significance of their work with the citation count as the most commonly-used metric for gauging this property. Recent studies have called for a broader evaluation of significance that includes more nuanced bibliometrics as well as altmetrics to more completely evaluate scientific research. To better understand the relationship between metrics and peer judgements of significance in chemistry, we have conducted a survey of chemists to investigate their perceptions of previously published research. Focusing on a specific issue of the Journal of the American Chemical Society published in 2003, respondents were asked to select which articles they thought best matched importance and significance given several contexts: highest number of citations, most significant (subjectively defined), most likely to share among chemists, and most likely to share with a broader audience. The answers to the survey can be summed up in several observations. The ability of respondents to predict the citation counts of established research is markedly lower than the ability of those counts to be predicted by the h-index of the corresponding author of each article. This observation is conserved even when only considering responses from chemists whose expertise falls within the subdiscipline that best describes the work performed in an article. Respondents view both cited papers and significant papers differently than papers that should be shared with chemists. We conclude from our results that peer judgements of importance and significance differ from metrics-based measurements, and that chemists should work with bibliometricians to develop metrics that better capture the nuance of opinions on the importance of a given piece of research.

Perception of the importance of chemistry research papers and comparison to citation rates.

The push to advance efficient, renewable, and clean energy sources has brought with it an effort to generate materials that are capable of storing hydrogen. Metal-organic framework materials (MOFs) have been the focus of many such studies as they are categorized for their large internal surface areas. We have addressed one of the major shortcomings of MOFs (their processibility) by creating and 3D printing a composite of acrylonitrile butadiene styrene (ABS) and MOF-5, a prototypical MOF, which is often used to benchmark H uptake capacity of other MOFs. The ABS-MOF-5 composites can be printed at MOF-5 compositions of 10% and below. Other physical and mechanical properties of the polymer (glass transition temperature, stress and strain at the breaking point, and Young's modulus) either remain unchanged or show some degree of hardening due to the interaction between the polymer and the MOF. We do observe some MOF-5 degradation through the blending process, likely due to the ambient humidity through the purification and solvent casting steps. Even with this degradation, the MOF still retains some of its ability to uptake H, seen in the ability of the composite to uptake more H than the pure polymer. The experiments and results described here represent a significant first step toward 3D printing MOF-5-based materials for H storage.

Matthew R. Hartings

Department of Chemistry

American University

Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

Matthew R. Hartings

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Chemistry

American University

Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

Department of Chemistry