development-validation-chromium-getters-for-solid-oxide-fuel-cell

Development and Validation of Chromium Getters for Solid Oxide Fuel Cell Power Systems

Degradation of cathode in solid oxide fuel cells (SOFC) remains a major concern for the long-term performance stability and operational reliability. The ...

University of Connecticut

Supercapacitors also known as electrochemical capacitors, that store energy via either Faradaic or non-Faradaic processes, have recently grown popularity mainly because they complement, and can even replace, conventional energy storage systems in variety of applications. Supercapacitor performance can be improved significantly by developing new nanocomposite electrodes which utilizes both the energy storage processes simultaneously. Here we report, fabrication of the freestanding hybrid electrodes, by incorporating graphene and carbon nanotubes (CNT) in pyrrole monomer via its in-situ polymerization. At the scan rate of 5 mV s(-1), the specific capacitance of the polypyrrole-CNT-graphene (PCG) electrode film was 453 F g(-1) with ultrahigh energy and power density of 62.96 W h kg(-1) and 566.66 W kg(-1) respectively, as shown in the Ragone plot. A nanofibrous membrane was electrospun and effectively used as a separator in the supercapacitor. Four supercapacitors were assembled in series to demonstrate the device performance by lighting a 2.2 V LED. 

Hybrid Electrodes by In-Situ Integration of Graphene and Carbon-Nanotubes in Polypyrrole for Supercapacitors.

Contractile behavior of cardiomyocytes relies on directed signal propagation through the electroconductive networks that exist within the native myocardium. Due to their unique electrical properties, electroactive materials, such as graphene, have recently emerged as promising candidate materials for cardiac tissue engineering applications. In this work, the potential of three-dimensional (3D) nanofibrous graphene and poly(caprolactone) (PCL + G) composite scaffold for cardiac tissue engineering has been explored for the first time. The addition of graphene into PCL led to an increased volume conductivity of scaffolds with an even distribution of graphene particles throughout the matrix. Graphene particles provided local conductive sites within the PCL matrix, which enabled application of external electrical stimulation throughout the scaffold using a custom point stimulation device. When mouse embryonic stem cell derived cardiomyocytes (mES-CM) were seeded on PCL + G scaffolds, cells adhered well, contracted spontaneously, and exhibited classical cardiomyocyte phenotype confirming the biocompatibility of electroactive PCL + G scaffolds. Further functional characterization demonstrated that graphene especially affected Ca handling properties of mES-CM compared to that of cardiomyocytes cultured in 2D culture, highlighting the potential of PCL + G for in vitro cardiac tissue engineering. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part A: 106A: 2923-2933, 2018.

Electroactive graphene composite scaffolds for cardiac tissue engineering.

Solid oxide electrochemical systems, such as solid oxide fuel cells (SOFC), solid oxide electrolysis cells (SOEC), and oxygen transport membranes (OTM) enable clean and reliable production of energy or fuel for a range of applications, including, but not limited to, residential, commercial, industrial, and grid-support. These systems utilize solid-state ceramic oxides which offer enhanced stability, fuel flexibility, and high energy conversion efficiency throughout operation. However, the nature of system conditions, such as high temperatures, complex redox atmosphere, and presence of volatile reactive species become taxing on solid oxide materials and limit their viability during long-term operation. Ongoing research efforts to identify the material corrosion and degradation phenomena, as well as discover possible mitigation techniques to extend material efficiency and longevity, is the current focus of the research and industrial community. In this review, degradation processes in select solid oxide electrochemical systems, system components, and comprising materials will be discussed. Overall degradation phenomena are presented and certain degradation mechanisms are discussed. State-of-the-art technologies to mitigate or minimize the above-mentioned degradation processes are presented.

Ashish Aphale

Department of Materials Science and Engineering

University of Connecticut

Development and Validation of Chromium Getters for Solid Oxide Fuel Cell Power Systems

Ashish Aphale

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Materials Science and Engineering

University of Connecticut

Development and Validation of Chromium Getters for Solid Oxide Fuel Cell Power Systems

Department of Materials Science and Engineering