operation-of-the-collaborative-composite-manufacturing-ccm-system

Operation of the Collaborative Composite Manufacturing (CCM) System

The automated tape placement and the automated fiber placement (AFP) machines provide a safer working environment and reduce the labor intensity of ...

Concordia University

 Electrically conductive polymers reinforced with carbon nanotubes (CNTs) have generated a great deal of scientific and industrial interest in the last few years. Advanced thermoplastic composites made of three different weight percentages (8%, 9%, and 10%) of multiwalled CNTs and polyether ether ketone (PEEK) were prepared by shear mixing process. The temperature- and pressure-dependent electrical resistance of these CNT-PEEK composites have been studied and presented in this paper. It has been found that electrical resistance decreases significantly with the application of heat and pressure.

Suong Van Hoa

Department of Mechanical,
Industrial & Aerospace Engineering,
Department of Mechanical, Industrial & Aerospace Engineering

Concordia University

Operation of the Collaborative Composite Manufacturing (CCM) System

Suong Van Hoa

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Mechanical,Industrial & Aerospace Engineering,Department of Mechanical, Industrial & Aerospace Engineering

Concordia University

Operation of the Collaborative Composite Manufacturing (CCM) System

Department of Mechanical,
Industrial & Aerospace Engineering,
Department of Mechanical, Industrial & Aerospace Engineering