twin-screw-extrusion-process-to-produce-renewable-fiberboards

Twin-Screw Extrusion Process to Produce Renewable Fiberboards

A versatile twin-screw extrusion process to provide an efficient thermo-mechano-chemical pre-treatment on lignocellulosic biomass before using it as ...

Université de Toulouse, INRAE, INPT

The aim of this study consisted of manufacturing renewable binderless fiberboards from coriander straw and a deoiled coriander press cake, thus at the same time ensuring the valorization of crop residues and process by-products. The press cake acted as a natural binder inside the boards owing to the thermoplastic behavior of its protein fraction during thermopressing. The influence of different fiber-refining methods was evaluated and it was shown that a twin-screw extrusion treatment effectively improved fiber morphology and resulted in fiberboards with enhanced performance as compared to a conventional grinding process. The best fiberboard was produced with extrusion-refined straw using a 0.4 liquid/solid (L/S) ratio and with 40% press cake addition. The water sensitivity of the boards was effectively reduced by 63% through the addition of an extrusion raw material premixing operation and thermal treatment of the panels at 200 °C, resulting in materials with good performance showing a flexural strength of 29 MPa and a thickness swelling of 24%. Produced without the use of any chemical adhesives, these fiberboards could thus present viable, sustainable alternatives for current commercial wood-based materials such as oriented strand board, particleboard and medium-density fiberboard, with high cost-effectiveness.

Impact of Thermomechanical Fiber Pre-Treatment Using Twin-Screw Extrusion on the Production and Properties of Renewable Binderless Coriander Fiberboards.

Laurent Labonne

Laboratoire de Chimie Agro-industrielle (LCA)

Université de Toulouse, INRAE, INPT

Twin-Screw Extrusion Process to Produce Renewable Fiberboards

Laurent Labonne

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Laboratoire de Chimie Agro-industrielle (LCA)

Université de Toulouse, INRAE, INPT

Twin-Screw Extrusion Process to Produce Renewable Fiberboards

Laboratoire de Chimie Agro-industrielle (LCA)