determining-viral-disinfection-efficacy-of-hot-water-laundering

Determining Viral Disinfection Efficacy of Hot Water Laundering

This protocol provides an example of a laboratory process for conducting laundering studies that generate data on viral disinfection. While the protocol ...

U.S. Environmental Protection Agency

Conventional water resources in many regions are insufficient to meet the water needs of growing populations, thus reuse is gaining acceptance as a method of water supply augmentation. Recent advancements in membrane technology have allowed for the reclamation of municipal wastewater for the production of drinking water, i.e., potable reuse. Although public perception can be a challenge, potable reuse is often the least energy-intensive method of providing additional drinking water to water stressed regions. A variety of membranes have been developed that can remove water contaminants ranging from particles and pathogens to dissolved organic compounds and salts. Typically, potable reuse treatment plants use polymeric membranes for microfiltration or ultrafiltration in conjunction with reverse osmosis and, in some cases, nanofiltration. Membrane properties, including pore size, wettability, surface charge, roughness, thermal resistance, chemical stability, permeability, thickness and mechanical strength, vary between membranes and applications. Advancements in membrane technology including new membrane materials, coatings, and manufacturing methods, as well as emerging membrane processes such as membrane bioreactors, electrodialysis, and forward osmosis have been developed to improve selectivity, energy consumption, fouling resistance, and/or capital cost. The purpose of this review is to provide a comprehensive summary of the role of polymeric membranes in the treatment of wastewater to potable water quality and highlight recent advancements in separation processes. Beyond membranes themselves, this review covers the background and history of potable reuse, and commonly used potable reuse process chains, pretreatment steps, and advanced oxidation processes. Key trends in membrane technology include novel configurations, materials and fouling prevention techniques. Challenges still facing membrane-based potable reuse applications, including chemical and biological contaminant removal, membrane fouling, and public perception, are highlighted as areas in need of further research and development.

A review of polymeric membranes and processes for potable water reuse.

Cesium-137 (Cs) is a persistent contaminant that poses a significant risk to human health and the environment. Understanding the fate and transport of Cs following a contamination incident is necessary for effective containment and remediation. In this study, we performed experiments to investigate how Cs sorption processes are affected by sediment type and varying water chemistries to better understand how Cs is transported in freshwater settings. Sediment was collected from various river deposits along the Susquehanna River adjacent to the Safety Light Corporation United States Environmental Protection Agency (US EPA) Superfund site (Bloomsburg, PA) and characterized prior to being used in batch reactor experiments with waters characteristic of different regions in the US (Central US and Northeast US) and with three different cation types (Mg, Na, and K) over a range of ionic strengths. Greater amounts of Cs sorption occurred with increasing sediment mud (silt and clay) content, although no major differences in sorption between the Central and Northeast US water types were observed. At an ionic strength (I) of 10 mM, K inhibited Cs sorption most effectively, followed by Mg, with Na having little effect on Cs sorption over the range of ionic strengths tested (I = 0.1, 1, and 10 mM). Our findings indicate that for the representative freshwater conditions tested here, sediment type (e.g., clay fraction) has a greater influence on Cs sorption processes than water chemistry. Additional reactions or processes occurring in relatively fresh water could buffer cation competition for sorption sites. Conducting experiments using site-specific sediment samples and water chemistries is useful for predicting Cs sorption and mobility in distinct environmental settings, particularly when the level of Cs contamination is high and if the waste or contaminated (or receiving) waters have a relatively high ionic strength.

Characterizing cesium sorption in freshwater settings using fluvial sediments and characteristic water chemistries.

Development of numerical models to predict stormwater-mediated transport of pathogenic spores in the environment depends on an understanding of adhesion forces that dictate detachment after rain events. Zeta potential values were measured in the laboratory for Bacillus globigii and Bacillus thuringiensis kurstaki, two common surrogates used to represent Bacillus anthracis, in synthetic baseline ultrapure water and laboratory prepared stormwater. Zeta potential curves were also determined for materials representative of urban infrastructure (concrete and asphalt). These data were used to predict the interaction energy between the spores and urban materials using Derjaguin-Landau-Verwey-Overbeek (DLVO) modeling. B. globigii and B. thuringiensis kurstaki sourced from Yakibou Inc., were found to have similar zeta potential curves, whereas spores sourced from the U.S. military's Dugway laboratory were found to diverge. In the ultrapure water, the modeling results use the laboratory data to demonstrate that the energy barriers between the spores and the urban materials were tunable through compression of the electrical double layer of the spores via changes of ionic strength and pH of the water. In the runoff water, charge neutralization dominated surface processes. The cations, metals, and natural organic matter (NOM) in the runoff water contributed to equalizing the zeta potential values for Dugway B. globigii and B. thuringiensis kurstaki, and drastically modified the surface of the concrete and asphalt. All DLVO energy curves using the runoff water were repulsive. The highest energy barrier predicted in this study was for Dugway B. globigii spores interacting with a concrete surface in runoff water, suggesting that this would be the most challenging combination to detach through water-based decontamination.

Laboratory results and mathematical modeling of spore surface interactions in stormwater runoff.

This paper presents a Stormwater Emergency Response Framework (SERF) for use in the containment and treatment of stormwater runoff following a hazardous material release. The framework consists of four high level process steps and a decision tree. These resources are intended to assist stormwater managers in fulfilling their emergency response responsibilities within the United States' National Incident Management System. Robust hydraulic and watershed modeling may take weeks to months to develop for a contaminated site, whereas decisions made in the initial hours can have a significant impact on limiting contamination spread. Many web resources are publicly available to assist responders in visualizing stormwater runoff flow paths. A case study provided in this paper also demonstrates how simple calculations may be utilized to estimate peak flows and storage volumes necessary to respond to precipitation events immediately. These calculations are useful for decision makers' allocation of containment and treatment resources within the impacted area. This includes where to deploy available resources to minimize contamination risks to downstream communities and where supplemental resources from outside partners are urgently needed.

Emergency response to stormwater contamination: A framework for containment and treatment.

Per- and polyfluoroalkyl substances (PFAS), which are present in many waters, have detrimental impacts on human health and the environment. Reverse osmosis (RO) and nanofiltration (NF) have shown excellent PFAS separation performance in water treatment; however, these membrane systems do not destroy PFAS but produce concentrated residual streams that need to be managed. Complete destruction of PFAS in RO and NF concentrate streams is ideal, but long-term sequestration strategies are also employed. Because no single technology is adequate for all situations, a range of processes are reviewed here that hold promise as components of treatment schemes for PFAS-laden membrane system concentrates. Attention is also given to relevant concentration processes because it is beneficial to reduce concentrate volume prior to PFAS destruction or sequestration. Given the costs and challenges of managing PFAS in membrane concentrates, it is critical to evaluate both established and emerging technologies in selecting processes for immediate use and continued research.

Managing and treating per- and polyfluoroalkyl substances (PFAS) in membrane concentrates.

This paper presents a case study demonstrating the process used to develop an overland flow model of radionuclide transport following an aerosol deposition from a hypothetical radiological dispersal device explosion. The process included the integration of digital elevation, building, and land cover information with hydrologic information from a calibrated Stormwater Management Model (SWMM) model. The overland flow model was used to explore the impact of washoff parameter selection and different storm events on radionuclide transport in surface flow. The range of washoff parameters used in the literature resulted in over a 7 times difference in radionuclide washoff, from a small surface removal to nearly full removal. The overland flow model illuminated the primary pathways of contaminant transport, a potentially useful tool that informs emergency response, planning, and remediation activities.

Anne Mikelonis

Office of Research and Development,
Center for Environmental Solutions and Emergency Response,
Homeland Security and Materials Management Division,
Office of Research and Development, Center for Environmental Solutions and Emergency Response, Homeland Security and Materials Management Division

U.S. Environmental Protection Agency

Determining Viral Disinfection Efficacy of Hot Water Laundering

Anne Mikelonis

Office of Research and Development,Center for Environmental Solutions and Emergency Response,Homeland Security and Materials Management Division,Office of Research and Development, Center for Environmental Solutions and Emergency Response, Homeland Security and Materials Management Division

U.S. Environmental Protection Agency

Determining Viral Disinfection Efficacy of Hot Water Laundering

Office of Research and Development,
Center for Environmental Solutions and Emergency Response,
Homeland Security and Materials Management Division,
Office of Research and Development, Center for Environmental Solutions and Emergency Response, Homeland Security and Materials Management Division