JoVE Logo

Anmelden

15.4 : pH Scale

Hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes. Two different solutions can differ in their hydronium or hydroxide ion concentrations by a million, billion, or even trillion times. A common means of expressing quantities that may span many orders of magnitude is to use a logarithmic scale. The pH of a solution is therefore defined as shown here, where [H3O+] is the molar concentration of hydronium ion in the solution:

 Chemical structure of paracetamol molecule, illustrating atomic bonds, planar conformation.

Rearranging this equation to isolate the hydronium ion molarity yields the equivalent expression:

 Thermal cycle diagram showing Brayton cycle stages and state points labeled in flow process chart.

Likewise, the hydroxide ion molarity may be expressed as a p-function or pOH:

 Static equilibrium diagram with ΣFx=0 and MA=0; force vectors, beam, pivot point shown.

or

 Vapor-liquid equilibrium diagram; isotherm, pressure-composition; distillation analysis.

Finally, the relation between these two ion concentration expressed as p-functions is easily derived from the KW expression:

 Chromatography system diagram; protein purification process; shows elution column and analyte flow.

At 25 °C, the value of KW is 1.0 × 10−14, and so:

 Static equilibrium equations diagram with ΣFx=0, ΣFy=0, MA=0 for educational research use.

The hydronium ion molarity in pure water (or any neutral solution) is 1.0 × 10−7 M at 25 °C. The pH and pOH of a neutral solution at this temperature are therefore:

 Static equilibrium equations diagram with forces ΣFx=0, ΣFy=0, moment MA=0 for analysis.

And so, at this temperature, acidic solutions are those with hydronium ion molarities greater than 1.0 × 10−7 M and hydroxide ion molarities less than 1.0 × 10−7 M (corresponding to pH values less than 7.00 and pOH values greater than 7.00). Basic solutions are those with hydronium ion molarities less than 1.0 × 10−7 M and hydroxide ion molarities greater than 1.0 × 10−7 M (corresponding to pH values greater than 7.00 and pOH values less than 7.00).

Since the autoionization constant KW is temperature dependent, these correlations between pH values and the acidic/neutral/basic adjectives will be different at temperatures other than 25 °C. For example, the hydronium molarity of pure water at 80°C is 4.9 × 10−7 M, which corresponds to pH and pOH values of:

 Chomsky hierarchy diagram illustrating formal grammar classification and language hierarchy.

At this temperature, neutral solutions exhibit pH = pOH = 6.31, acidic solutions exhibit pH less than 6.31 and pOH greater than 6.31, whereas basic solutions exhibit pH greater than 6.31 and pOH less than 6.31. This distinction can be important when studying certain processes that occur at other temperatures, such as enzyme reactions in warm-blooded organisms at a temperature around 36 – 40 °C. Unless otherwise noted, references to pH values are presumed to be those at 25 °C.

This text is adapted from Openstax, Chemistry 2e, Section 14.2: pH and pOH.

Tags

PH ScaleHydronium IonsAqueous SolutionNegative ExponentsChemist Soren SorensonAcidityLogarithmConcentrationAcidic SolutionBasic SolutionHydroxide IonsNeutral SolutionPOH ValueAutoionization Of Water

Aus Kapitel 15:

article

Now Playing

15.4 : pH Scale

Säuren und Basen

68.2K Ansichten

article

15.1 : Bronsted-Lowry Säuren und Basen

Säuren und Basen

90.7K Ansichten

article

15.2 : Säure-Basen-Stärken und Dissoziationskonstanten

Säuren und Basen

60.1K Ansichten

article

15.3 : Wasser: A Bronsted-Lowry-Säure und Base

Säuren und Basen

49.9K Ansichten

article

15.5 : Relative Stärken von konjugierten Säure-Base-Paaren

Säuren und Basen

45.2K Ansichten

article

15.6 : Starke Säure- und Basenlösungen

Säuren und Basen

31.3K Ansichten

article

15.7 : Schwach saure Lösungen

Säuren und Basen

37.5K Ansichten

article

15.8 : Schwache Basislösungen

Säuren und Basen

22.4K Ansichten

article

15.9 : Mischungen von Säuren

Säuren und Basen

19.5K Ansichten

article

15.10 : Ionen als Säuren und Basen

Säuren und Basen

23.4K Ansichten

article

15.11 : Bestimmung des pH-Werts von Salzlösungen

Säuren und Basen

43.3K Ansichten

article

15.12 : Polyprotische Säuren

Säuren und Basen

28.9K Ansichten

article

15.13 : Säurestärke und Molekularstruktur

Säuren und Basen

30.7K Ansichten

article

15.14 : Lewis-Säuren und -Basen

Säuren und Basen

43.4K Ansichten

JoVE Logo

Datenschutz

Nutzungsbedingungen

Richtlinien

Forschung

Lehre

ÜBER JoVE

Copyright © 2025 MyJoVE Corporation. Alle Rechte vorbehalten