Anmelden

Carboxylic acids with lower molecular weight exhibit a sharp and unpleasant odor. They also have higher boiling and melting points than analogous compounds, such as aldehydes, ketones, and alcohols.

Figure1

In addition to the dipole–dipole interaction of the polar carbonyl and hydroxyl bonds, strong intermolecular hydrogen bonding between carboxylic acid molecules dictates several physical properties.

Figure2

The strong interaction causes the carboxylic acid molecules to exist in stable dimers, increasing their molecular weight two-fold. Consequently, they have higher boiling points. These carboxylic acid dimers have much higher equilibrium constants (as large as 106–107 M−1) than alcohol dimers (11 M−1).

A similar trend is observed with the melting points of carboxylic acids. The melting point increases with the increase in hydrocarbon chain length. The saturated carboxylic acids with more than eight carbons are typically solids at room temperature. However, unsaturated carboxylic acids have lower melting points. For example, stearic acid (C18H36O2), a saturated carboxylic acid, melts at 70 °C, while linoleic acid (C18H32O2), bearing two cis double bonds, melts at −5 °C.

In terms of solubility, low molecular weight carboxylic acids are soluble in water, owing to their hydrogen bonding interaction with water molecules. In contrast, higher molecular weight carboxylic acids are more soluble in alcohols due to the higher van der Waals interaction between the molecules. Notably, carboxylic acids are highly soluble in non-polar solvents like CCl4. Interestingly, some dicarboxylic acids are fairly water-soluble due to their substantial hydrogen bonding interaction.

Tags

Carboxylic AcidsPhysical PropertiesMolecular WeightBoiling PointsMelting PointsHydrogen BondingDimersHydrocarbon Chain LengthSaturated AcidsUnsaturated AcidsSolubilityNon polar SolventsDicarboxylic Acids

Aus Kapitel 13:

article

Now Playing

13.2 : Physikalische Eigenschaften von Carbonsäuren

Carbonsäuren

4.4K Ansichten

article

13.1 : IUPAC Nomenklatur der Carbonsäuren

Carbonsäuren

8.7K Ansichten

article

13.3 : Acidität von Carbonsäuren

Carbonsäuren

6.4K Ansichten

article

13.4 : Auswirkungen von Substituenten auf die Acidität von Carbonsäuren

Carbonsäuren

6.4K Ansichten

article

13.5 : IR und UV-Vis-Spektroskopie von Carbonsäuren

Carbonsäuren

3.6K Ansichten

article

13.6 : NMR und Massenspektroskopie von Carbonsäuren

Carbonsäuren

3.6K Ansichten

article

13.7 : Herstellung von Carbonsäuren: Überblick

Carbonsäuren

2.4K Ansichten

article

13.8 : Herstellung von Carbonsäuren: Hydrolyse von Nitrilen

Carbonsäuren

3.8K Ansichten

article

13.9 : Herstellung von Carbonsäuren: Carboxylierung von Grignard-Reagenzien

Carbonsäuren

4.2K Ansichten

article

13.10 : Reaktionen der Carbonsäuren: Einführung

Carbonsäuren

2.9K Ansichten

article

13.11 : Carbonsäuren zu Estern: Überblick über die säurekatalysierte (Fischer)Veresterung

Carbonsäuren

17.7K Ansichten

article

13.12 : Carbonsäuren zu Estern: Säurekatalysierter (Fischer)Veresterungsmechanismus

Carbonsäuren

7.6K Ansichten

article

13.13 : Carbonsäuren zu Methylestern: Alkylierung mit Diazomethan

Carbonsäuren

2.0K Ansichten

article

13.14 : Carbonsäuren zu Säurechloriden

Carbonsäuren

6.6K Ansichten

article

13.15 : Umwandlung von Carbonsäuren in primäre Alkohole: Hydridreduktion

Carbonsäuren

2.5K Ansichten

See More

JoVE Logo

Datenschutz

Nutzungsbedingungen

Richtlinien

Forschung

Lehre

ÜBER JoVE

Copyright © 2025 MyJoVE Corporation. Alle Rechte vorbehalten