engineered-lung-tissues-prepared-from-decellularized-lung-slices

Engineered Lung Tissues Prepared from Decellularized Lung Slices

There is a need for improved 3-dimensional (3D) lung models that recapitulate the architectural and cellular complexity of the native lung alveolus ex ...

Yale University

Yale School of Medicine

Type II cells are the defenders of the alveolus. They produce surfactant to prevent alveolar collapse, they actively transport water to prevent filling of the air sacs that would otherwise prevent gas exchange, and they differentiate to type I epithelial cells. They are an indispensable component of functional lung tissue. To understand the functionality of type II cells in isolation, we sought to track their fate in decellularized matrices and to assess their ability to contribute to barrier function by differentiation to type I alveolar epithelial cells. Rat type II cells were isolated from neonatal rat lungs by labeling with the RTII-70 surface marker and separation using a magnetic column. This produced a population of ∼50% RTII-70-positive cells accompanied by few type I epithelial cells or α-actin-positive mesenchymal cells. This population was seeded into decellularized rat lung matrices and cultured for 1 or 7 days. Culture in Dulbecco's modified Eagle's medium +10% fetal bovine serum (FBS) resulted in reduced expression of epithelial markers and increased expression of mesenchymal markers. By 7 days, no epithelial markers were visible by immunostaining; nearly all cells were α-actin positive. Gene expression for the mesenchymal markers, α-actin, vimentin, and TGF-βR, was significantly upregulated on day 1 (p=0.0005, 0.0005, and 2.342E-5, respectively). Transcript levels of α-actin and TGF-βR remained high at 7 days (p=1.364E-10 and 0.0002). Interestingly, human type II cells cultured under the same conditions showed a similar trend in the loss of epithelial markers, but did not display high expression of mesenchymal markers. Rat cells additionally showed the ability to produce and degrade the basement membrane and extracellular matrix components, such as fibronectin, collagen IV, and collagen I. Quantitative real-time reverse transcription polymerase chain reaction (RT-PCR) showed significant increases in expression of the fibronectin and matrix metalloprotease-2 (MMP-2) genes after 1 day in culture (p=0.0135 and 0.0128, respectively) and elevated collagen I expression at 7 days (p=0.0016). These data suggest that the original type II-enriched population underwent a transition to increased expression of mesenchymal markers, perhaps as part of a survival or wound-healing program. These results suggest that additional medium components and/or the application of physiologically appropriate stimuli such as ventilation may be required to promote lung-specific epithelial phenotypes. 

Fate of distal lung epithelium cultured in a decellularized lung extracellular matrix.

There is a growing body of work dedicated to producing acellular lung scaffolds for use in regenerative medicine by decellularizing donor lungs of various species. These scaffolds typically undergo substantial matrix damage due to the harsh conditions required to remove cellular material (e.g., high pH, strong detergents), lengthy processing times, or pre-existing tissue contamination from microbial colonization. In this work, a new decellularization technique is described that maintains the global tissue architecture, key matrix components, mechanical composition and cell-seeding potential of lung tissue while effectively removing resident cellular material. Acellular lung scaffolds were produced from native porcine lungs using a combination of Triton X-100 and sodium deoxycholate (SDC) at low concentrations in 24 hours. We assessed the effect of matrix decellularization by measuring residual DNA, biochemical composition, mechanical characteristics, tissue architecture, and recellularization capacity. 

Production of decellularized porcine lung scaffolds for use in tissue engineering.

Extracellular matrix is a key component of many products in regenerative medicine. Multiple regenerative medicine products currently in the clinic are comprised of human or xenogeneic extracellular matrix. In addition, whole-organ regeneration exploits decellularized native organs as scaffolds for organotypic cell culture. However, precise understanding of the constituents of such extracellular matrix-based implants and scaffolds has sorely lagged behind their use. We present here an advanced protein extraction method using known quantities of proteotypic (13)C-labeled peptides to quantify matrix proteins in native and decellularized lung tissues. Using quantitative proteomics that produce picomole-level measurements of a large number of matrix proteins, we show that a mild decellularization technique ("Triton/SDC") results in near-native retention of laminins, proteoglycans, and other basement membrane and ECM-associated proteins. Retention of these biologically important glycoproteins and proteoglycans is quantified to be up to 27-fold higher in gently-decellularized lung scaffolds compared to scaffolds generated using a previously published decellularization regimen. Cells seeded onto this new decellularized matrix also proliferate robustly, showing positive staining for proliferating cell nuclear antigen (PCNA). The high fidelity of the gently decellularized scaffold as compared to the original lung extracellular matrix represents an important step forward in the ultimate recapitulation of whole organs using tissue-engineering techniques. This method of ECM and scaffold protein analysis allows for better understanding, and ultimately quality control, of matrices that are used for tissue engineering and human implantation. These results should advance regenerative medicine in general, and whole organ regeneration in particular.

Targeted proteomics effectively quantifies differences between native lung and detergent-decellularized lung extracellular matrices.

Whole lung tissue engineering is a relatively new area of investigation. In a short time, however, the field has advanced quickly beyond proof of concept studies in rodents and now stands on the cusp of wide-spread scale up to large animal studies. Therefore, this technology is ever closer to being directly clinically relevant.

Lung regeneration: steps toward clinical implementation and use.

Metallic stents cause vascular wall damage with subsequent smooth muscle cell (SMC) proliferation, neointimal hyperplasia, and treatment failure. To combat in-stent restenosis, drug-eluting stents (DES) delivering mTOR inhibitors such as sirolimus or everolimus have become standard for coronary stenting. However, the relatively non-specific action of mTOR inhibitors prevents efficient endothelium recovery and mandates dual antiplatelet therapy to prevent thrombosis. Unfortunately, long-term dual antiplatelet therapy leads to increased risk of bleeding/stroke and, paradoxically, myocardial infarction. Here, we took advantage of the fact that nitric oxide (NO) increases Fas receptors on the SMC surface. Fas forms a death-inducing complex upon binding to Fas ligand (FasL), while endothelial cells (ECs) are relatively resistant to this pathway. Selected doses of FasL and NO donor synergistically increased SMC apoptosis and inhibited SMC growth more potently than did everolimus or sirolimus, while having no significant effect on EC viability and proliferation. This differential effect was corroborated in ex vivo pig coronaries, where the neointimal formation was inhibited by the drug combination, but endothelial viability was retained. We also deployed FasL-NO donor-releasing ethylene-vinyl acetate copolymer (EVAc)-coated stents into pig coronary arteries, and cultured them in perfusion bioreactors for one week. FasL and NO donor, released from the stent coating, killed SMCs close to the stent struts, even in the presence of flow rates mimicking those of native arteries. Thus, the FasL-NO donor-combination has a potential to prevent intimal hyperplasia and in-stent restenosis, without harming endothelial restoration, and hence may be a superior drug delivery strategy for DES.

Fas ligand and nitric oxide combination to control smooth muscle growth while sparing endothelium.

Efforts to decipher chronic lung disease and to reconstitute functional lung tissue through regenerative medicine have been hampered by an incomplete understanding of cell-cell interactions governing tissue homeostasis. Because the structure of mammalian lungs is highly conserved at the histologic level, we hypothesized that there are evolutionarily conserved homeostatic mechanisms that keep the fine architecture of the lung in balance. We have leveraged single-cell RNA sequencing techniques to identify conserved patterns of cell-cell cross-talk in adult mammalian lungs, analyzing mouse, rat, pig, and human pulmonary tissues. Specific stereotyped functional roles for each cell type in the distal lung are observed, with alveolar type I cells having a major role in the regulation of tissue homeostasis. This paper provides a systems-level portrait of signaling between alveolar cell populations. These methods may be applicable to other organs, providing a roadmap for identifying key pathways governing pathophysiology and informing regenerative efforts.

Single-cell connectomic analysis of adult mammalian lungs.

The pulmonary blood-gas barrier represents a remarkable feat of engineering. It achieves the exquisite thinness needed for gas exchange by diffusion, the strength to withstand the stresses and strains of repetitive and changing ventilation, and the ability to actively maintain itself under varied demands. Understanding the design principles of this barrier is essential to understanding a variety of lung diseases, and to successfully regenerating or artificially recapitulating the barrier ex vivo. Many classical studies helped to elucidate the unique structure and morphology of the mammalian blood-gas barrier, and ongoing investigations have helped to refine these descriptions and to understand the biological aspects of blood-gas barrier function and regulation. This article reviews the key features of the blood-gas barrier that enable achievement of the necessary design criteria and describes the mechanical environment to which the barrier is exposed. It then focuses on the biological and mechanical components of the barrier that preserve integrity during homeostasis, but which may be compromised in certain pathophysiological states, leading to disease. Finally, this article summarizes recent key advances in efforts to engineer the blood-gas barrier ex vivo, using the platforms of lung-on-a-chip and tissue-engineered whole lungs. © 2020 American Physiological Society. Compr Physiol 10:415-452, 2020.

Bioengineering the Blood-gas Barrier.

Conventional in vitro methods for biological evaluation of intra-arterial devices such as stents fail to accurately predict cytotoxicity and remodeling events. An ex vivo flow-tunable vascular bioreactor system (VesselBRx), comprising intra- and extra-luminal monitoring capabilities, addresses these limitations. VesselBRx mimics the in vivo physiological, hyperplastic, and cytocompatibility events of absorbable magnesium (Mg)-based stents in ex vivo stent-treated porcine and human coronary arteries, with in-situ and real-time monitoring of local stent degradation effects. Unlike conventional, static cell culture, the VesselBRx perfusion system eliminates unphysiologically high intracellular Mg concentrations and localized O consumption resulting from stent degradation. Whereas static stented arteries exhibited only 20.1% cell viability and upregulated apoptosis, necrosis, metallic ion, and hypoxia-related gene signatures, stented arteries in VesselBRx showed almost identical cell viability to in vivo rabbit models (~94.0%). Hyperplastic intimal remodeling developed in unstented arteries subjected to low shear stress, but was inhibited by Mg-based stents in VesselBRx, similarly to in vivo. VesselBRx represents a critical advance from the current static culture standard of testing absorbable vascular implants.

An ex vivo physiologic and hyperplastic vessel culture model to study intra-arterial stent therapies.

Transplantation of pancreatic islets has been shown to be effective, in some patients, for the long-term treatment of type 1 diabetes. However, transplantation of islets into either the portal vein or the subcutaneous space can be limited by insufficient oxygen transfer, leading to islet loss. Furthermore, oxygen diffusion limitations can be magnified when islet numbers are increased dramatically, as in translating from rodent studies to human-scale treatments. To address these limitations, an islet transplantation approach using an acellular vascular graft as a vascular scaffold has been developed, termed the BioVascular Pancreas (BVP). To create the BVP, islets are seeded as an outer coating on the surface of an acellular vascular graft, using fibrin as a hydrogel carrier. The BVP can then be anastomosed as an arterial (or arteriovenous) graft, which allows fully oxygenated arterial blood with a pO of roughly 100 mmHg to flow through the graft lumen and thereby supply oxygen to the islets. In silico simulations and in vitro bioreactor experiments show that the BVP design provides adequate survivability for islets and helps avoid islet hypoxia. When implanted as end-to-end abdominal aorta grafts in nude rats, BVPs were able to restore near-normoglycemia durably for 90 days and developed robust microvascular infiltration from the host. Furthermore, pilot implantations in pigs were performed, which demonstrated the scalability of the technology. Given the potential benefits provided by the BVP, this tissue design may eventually serve as a solution for transplantation of pancreatic islets to treat or cure type 1 diabetes.

Development of a Bioartificial Vascular Pancreas.

The development of an  system for the study of lung vascular disease is critical to understanding human pathologies. Conventional culture systems fail to fully recapitulate native microenvironmental conditions and are typically limited in their ability to represent human pathophysiology for the study of disease and drug mechanisms. Whole organ decellularization provides a means to developing a construct that recapitulates structural, mechanical, and biological features of a complete vascular structure. Here, we developed a culture protocol to improve endothelial cell coverage in whole lung scaffolds and used single-cell RNA-sequencing analysis to explore the impact of decellularized whole lung scaffolds on endothelial phenotypes and functions in a biomimetic bioreactor system. Intriguingly, we found that the phenotype and functional signals of primary pulmonary microvascular revert back-at least partially-toward native lung endothelium. Additionally, human induced pluripotent stem cell-derived endothelium cultured in decellularized lung systems start to gain various native human endothelial phenotypes. Vascular barrier function was partially restored, while small capillaries remained patent in endothelial cell-repopulated lungs. To evaluate the ability of the engineered endothelium to modulate permeability in response to exogenous stimuli, lipopolysaccharide (LPS) was introduced into repopulated lungs to simulate acute lung injury. After LPS treatment, proinflammatory signals were significantly increased and the vascular barrier was impaired. Taken together, these results demonstrate a novel platform that recapitulates some pulmonary microvascular functions and phenotypes at a whole organ level. This development may help pave the way for using the whole organ engineering approach to model vascular diseases.

Katherine L. Leiby

Department of Biomedical Engineering

Yale University

Engineered Lung Tissues Prepared from Decellularized Lung Slices

Katherine L. Leiby

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Biomedical Engineering

Yale University

Engineered Lung Tissues Prepared from Decellularized Lung Slices

Department of Biomedical Engineering