Nos gustaría agradecer al Prof. Ferenc Krausz por las discusiones y Najd Altwaijry por su apoyo para la finalización del manuscrito. Este trabajo ha sido financiado por el Centro de Aplicaciones Avanzadas de Láser (CALA).

<ol>
	<li>Fattahi, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Third-generation+femtosecond+technology.">Third-generation femtosecond technology.</a> Optica. 1 (1), 45-63 (2014).</li><li>Hentschel, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Attosecond+metrology.">Attosecond metrology.</a> Nature. 414 (6863), 509-513 (2001).</li><li>Cavalieri, A. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intense+1.5-cycle+near+infrared+laser+waveforms+and+their+use+for+the+generation+of+ultra-broadband+soft-x-ray+harmonic+continua.">Intense 1.5-cycle near infrared laser waveforms and their use for the generation of ultra-broadband soft-x-ray harmonic continua.</a> New J Phys. 9 (7), 242 (2007).</li><li>Schweinberger, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Waveform-controlled+near-single-cycle+milli-joule+laser+pulses+generate+sub-10+nm+extreme+ultraviolet+continua.">Waveform-controlled near-single-cycle milli-joule laser pulses generate sub-10 nm extreme ultraviolet continua.</a> Opt Lett. 37, 3573-3575 (2012).</li><li>Buck, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real-time+observation+of+laser-driven+electron+acceleration.">Real-time observation of laser-driven electron acceleration.</a> Nature Phys. 7 (7), 543-548 (2011).</li><li>Zhong, H., Karpowicz, N., Zhang, X. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Terahertz+emission+profile+from+laser-induced+air+plasma.">Terahertz emission profile from laser-induced air plasma.</a> Appl Phys Lett. 88 (26), 261103 (2006).</li><li>Herrmann, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+sub-three-cycle,+16+TW+light+pulses+by+using+noncollinear+optical+parametric+chirped-pulse+amplification.">Generation of sub-three-cycle, 16 TW light pulses by using noncollinear optical parametric chirped-pulse amplification.</a> Opt Lett. 34 (16), 2459-2461 (2009).</li><li>Adachi, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=1.5+mJ,+6.4+fs+parametric+chirped-pulse+amplification+system+at+1+kHz.">1.5 mJ, 6.4 fs parametric chirped-pulse amplification system at 1 kHz.</a> Opt Lett. 32 (17), 2487-2489 (2007).</li><li>Adachi, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=5-fs,+multi-mJ,+CEP-locked+parametric+chirped-pulse+amplifier+pumped+by+a+450-nm+source+at+1+kHz.">5-fs, multi-mJ, CEP-locked parametric chirped-pulse amplifier pumped by a 450-nm source at 1 kHz.</a> Opt express. 16 (19), 14341-14352 (2008).</li><li>Yin, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-efficiency+optical+parametric+chirped-pulse+amplifier+in+BiB3O6+for+generation+of+3+mJ,+two-cycle,+carrier-envelope-phase-stable+pulses+at+1.7+&#181;m.">High-efficiency optical parametric chirped-pulse amplifier in BiB3O6 for generation of 3 mJ, two-cycle, carrier-envelope-phase-stable pulses at 1.7 &#181;m.</a> Opt Lett. 41 (6), 1142-1145 (2016).</li><li>Deng, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carrier-envelope-phase-stable,+1.2+mJ,+1.5+cycle+laser+pulses+at+2.1+&#181;m.">Carrier-envelope-phase-stable, 1.2 mJ, 1.5 cycle laser pulses at 2.1 &#181;m.</a> Opt Lett. 37 (23), 4973-4975 (2012).</li><li>Rothhardt, J., Demmler, S., H&#228;drich, S., Limpert, J., T&#252;nnermann, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Octave-spanning+OPCPA+system+delivering+CEP-stable+few-cycle+pulses+and+22+W+of+average+power+at+1+MHz+repetition+rate.">Octave-spanning OPCPA system delivering CEP-stable few-cycle pulses and 22 W of average power at 1 MHz repetition rate.</a> Opt express. 20 (10), 10870-10878 (2012).</li><li>Heckl, O. H., Nolte, S., Schrempel, F., Dausinger, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Ultrafast Thin-Disk Lasers.Ultrashort Pulse Laser Technology. 195, 93-115 (2016).</li><li>Zapata, L. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cryogenic+Yb:YAG+composite-thin-disk+for+high+energy+and+average+power+amplifiers.">Cryogenic Yb:YAG composite-thin-disk for high energy and average power amplifiers.</a> Opt. Lett. 40 (11), 2610-2613 (2015).</li><li>Schulz, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Yb:YAG+Innoslab+amplifier:+efficient+high+repetition+rate+subpicosecond+pumping+system+for+optical+parametric+chirped+pulse+amplification.">Yb:YAG Innoslab amplifier: efficient high repetition rate subpicosecond pumping system for optical parametric chirped pulse amplification.</a> Opt Lett. 36 (13), 2456-2458 (2011).</li><li>Roeser, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Millijoule+pulse+energy+high+repetition+rate+femtosecond+fiber+chirped-pulse+amplification+system.">Millijoule pulse energy high repetition rate femtosecond fiber chirped-pulse amplification system.</a> Opt Lett. 32 (24), 3495-3497 (2007).</li><li>Russbueldt, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=400+W+Yb:YAG+Innoslab+fs-amplifier.">400 W Yb:YAG Innoslab fs-amplifier.</a> Opt Express. 17 (15), 12230-12245 (2009).</li><li>Baumgarten, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=0.5+kHz+repetition+rate+picosecond+laser.">0.5 kHz repetition rate picosecond laser.</a> Opt Lett. 41 (14), 3339-3342 (2016).</li><li>Klingebiel, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=220mJ,+1+kHz+Picosecond+Regenerative+Thin-Disk+Amplifier.">220mJ, 1 kHz Picosecond Regenerative Thin-Disk Amplifier.</a> , (2015).</li><li>Nubbemeyer, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=1+kW,+200+mJ+picosecond+thin-disk+laser+system.">1 kW, 200 mJ picosecond thin-disk laser system.</a> Opt Lett. 42 (7), 1381-1384 (2017).</li><li>Fattahi, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-power,+1-ps,+all-Yb:YAG+thin-disk+regenerative+amplifier.">High-power, 1-ps, all-Yb:YAG thin-disk regenerative amplifier.</a> Opt Lett. 41 (6), 1126-1129 (2016).</li><li>Brons, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Energy+scaling+of+Kerr-lens+mode-locked+thin-disk+oscillators.">Energy scaling of Kerr-lens mode-locked thin-disk oscillators.</a> Opt Lett. 39 (22), 6442-6445 (2014).</li><li>Trebino, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+ultrashort+laser+pulses+in+the+time-frequency+domain+using+frequency-resolved+optical+gating.">Measuring ultrashort laser pulses in the time-frequency domain using frequency-resolved optical gating.</a> Rev Sci Instrum. 68 (9), 3277-3295 (1997).</li><li>Arisholm, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=General+numerical+methods+for+simulating+second-order+nonlinear+interactions+in+birefringent+media.">General numerical methods for simulating second-order nonlinear interactions in birefringent media.</a> J Opt Soc Am B. 14 (10), 2543-2549 (1997).</li><li>Zhang, D. X., Kong, Y. F., Zhang, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+parametric+properties+of+532-nm-pumped+beta-barium-borate+near+the+infrared+absorption+edge.">Optical parametric properties of 532-nm-pumped beta-barium-borate near the infrared absorption edge.</a> Opt Commun. 184 (5), 485-491 (2000).</li><li>Kato, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Temperature-tuned+90o+phase-matching+properties+of+LiB3O5.">Temperature-tuned 90o phase-matching properties of LiB3O5.</a> IEEE J Quant Electron. 30 (12), 2950-2952 (1994).</li><li>Fattahi, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Third-generation femtosecond technology. , (2016).</li></ol>

Los autores no tienen nada que revelar.

El funcionamiento de llave en mano del oscilador se logra mediante la gestión óptima del calor de los diferentes componentes del láser. La salida del oscilador es reproducible diariamente, sin necesidad de alineación o optimización adicional. Además, la estabilidad de energía de impulso a impulso y estabilidad de orientación espacial del láser de semillas cumple las condiciones previas para lograr el funcionamiento estable del amplificador regenerativo. Otras fuentes de semillas de baja energía, tales como amplificadores de fibra, se pueden utilizar para sembrar el amplificador. En este estudio, se utilizó un oscilador KLM de disco fino Yb: YAG de 2 μJ para ayudar a la amplificación del amplificador regenerativo reduciendo el crecimiento de las fases no lineales acumuladas, ya que el número requerido de desplazamientos de ida y vuelta se reduce para la energía de semilla de mayor entrada . Además, la energía de semilla más alta influye en el proceso de amplificación y reduce el estrechamiento de la ganancia. El ancho de banda espectral medido del impulso amplificadoEs para energıas de semilla diferentes a una potencia de bomba fija se muestra en la Figura 5c . El ancho de banda espectral amplificado disminuye para las energías de semillas más bajas debido al estrechamiento de la ganancia. Para 10 pJ de energía de semilla, el láser opera en el período de duplicación, y no es posible alcanzar un funcionamiento estable, incluso aumentando el número de viajes de ida y vuelta. Además de la cuidadosa optimización de los sistemas de refrigeración y de la alimentación de los diodos, el funcionamiento del amplificador regenerativo a la saturación juega un papel importante en la estabilidad obtenida del amplificador. El fundamental o segundo armónico del láser se puede utilizar para bombear un sistema OPCPA. Para el SHG, se compararon las prestaciones de un LBO y un BBO, ya que ofrecen un alto coeficiente no lineal y un umbral de daño, a pesar del mayor desplazamiento espacial y la limitada apertura disponible en el caso del BBO. Como el coeficiente no lineal de BBO es casi el doble que el LBO, un cristal más corto es sufPara alcanzar el límite de saturación para SHG ( Figura 6a ). Por lo tanto, BBO es la opción más adecuada, ya que la fase no lineal acumulada es menor 28 . Las duraciones de impulso de los impulsos SH se caracterizan experimentalmente con eficacias de conversión diferentes. Se observó que a altas eficiencias de conversión, el espectro SHG se amplía y aparece una fase espectral de orden superior ( Figura 6 ). Por lo tanto, se elige el caso B, con la eficiencia de conversión del 70%, donde el SH y los haces fundamentales no convertidos mantienen una excelente calidad.

La generación de pulsos láser de alta energía y pocos ciclos a una alta tasa de repetición es de gran interés para los campos aplicados, como la ciencia de attosecondos 1 , 2 , 3 , 4 y la física de campo alto 5 , 6 , que pueden beneficiarse directamente De la disponibilidad de tales fuentes. OPCPA representa la ruta más prometedora para lograr altas energías de pulso y largos anchos de banda de amplificación que soportan simultáneamente impulsos de pocos ciclos 1 . Hasta la fecha, la OPCPA permite la amplificación de banda ancha, que genera impulsos de ciclo reducido 7 , 8 , 9 , 10 . Sin embargo, una implementación modificada del esquema OPCPA, que utiliza pulsos de bombas cortas en la escala de picosegundos,Haciendo que este enfoque sea escalable para energías de pulso aún más altas y potencias medias en el régimen de pocos ciclos 1 , 11 , 12 . Debido a la alta intensidad de la bomba en OPCPA de pulso de pulso corto, la alta ganancia de un solo paso permite el uso de cristales muy delgados para soportar grandes anchos de banda de amplificación. Aunque el OPCPA bombeado de pulso corto tiene muchas ventajas, la realizabilidad de este enfoque está sujeta a la disponibilidad de láseres especialmente diseñados para este propósito. Estos láseres de bombeo están obligados a suministrar impulsos de picosecondro de alta energía con una calidad de haz limitada de difracción cercana a frecuencias de repetición en el intervalo de kHz a MHz 13 , 14 , 15 . La introducción de láseres dopados con ytterbio en diferentes geometrías, capaces de suministrar impulsos láser de picosecondos con alta energía y alta potencia media, Están a punto de cambiar el estado actual del campo 1 , 13 , 14 , 15 , 16 , 17 , 18 . Yb: YAG tiene una buena conductividad térmica y una larga vida útil en estado superior, y puede ser bombeada por láseres de diodo económicos. Su rendimiento cuando se utiliza en geometría de disco fino es excepcional debido a la refrigeración eficiente del medio de ganancia para escalar simultáneamente el pico y la potencia media. Además, la suposición de autofocalización dentro del medio de ganancia durante el proceso de amplificación se suprime debido a la esbeltez del disco delgado en comparación con otras geometrías del medio de ganancia, dando como resultado perfiles temporales y espaciales excelentes de los impulsos amplificados. La combinación de este concepto con el CPA es prometedor para generar pulsos de picoseconde con cientos de milijolios de energía y cientosDe vatios de potencia media 19 , 20 . El objetivo de este trabajo es demostrar un amplificador regenerativo de disco fino Yb: YAG llave en mano con un rendimiento diario excepcional como fuente adecuada para el bombeo de OPCPA 21 . Para lograr este objetivo, este estudio emplea un oscilador de disco delgado Yb: YAG 22 con varios microjoules de energía de pulso para sembrar el amplificador para minimizar la fase no lineal acumulada durante el proceso de amplificación. Este protocolo proporciona la receta para construir y operar el sistema láser, que se describe en otra parte 21 . Se presentan detalles sobre el software de implementación y control de componentes y se describe el proceso de alineación del sistema.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Electrooptics</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Fiber-Coupled Diode Laser Module</td>
			<td>Dilas Diodenlaser GmbH</td>
			<td>M1F8H12-940.5-500C-IS11.34</td>
			<td></td>
		</tr>
		<tr>
			<td>Fiber-Coupled Diode Laser Module</td>
			<td>Laserline GmbH</td>
			<td>LDM1000-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Power Supply for Diode Laser</td>
			<td>Delta Elektronika B.V.</td>
			<td>SM 15-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Power Supply for Diode Laser</td>
			<td>Delta Elektronika B.V.</td>
			<td>SM 35-45</td>
			<td></td>
		</tr>
		<tr>
			<td>Pulse Picker&#39;s Driver</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Pockels Cell&#39;s Driver</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Pulse Picker&#39;s Driver Power Supply</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>PCD8m7</td>
			<td></td>
		</tr>
		<tr>
			<td>Pockels Cell&#39;s Driver Power Supply</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>PCD8m7</td>
			<td></td>
		</tr>
		<tr>
			<td>Delay Generator PCI</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>BME_SG08p</td>
			<td></td>
		</tr>
		<tr>
			<td>Splitter Box</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Resonant Preamplifier</td>
			<td>Bergmann Messger&#228;te Entwicklung KG&#160;</td>
			<td>BME_P03</td>
			<td></td>
		</tr>
		<tr>
			<td>Pulse Picker&#39;s crystal</td>
			<td>Castech Inc.</td>
			<td>N/A, customized</td>
			<td>12*12*20 mm&#179;</td>
		</tr>
		<tr>
			<td>Pockels Cell&#39;s crystal</td>
			<td>Castech Inc.</td>
			<td>N/A, customized</td>
			<td>12*12*20 mm&#179;</td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Optics</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Thin-disk</td>
			<td>TRUMPF Scientific Lasers&#160;</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Thin-disk Head</td>
			<td>TRUMPF Scientific Lasers&#160;</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Fiber</td>
			<td>Frank Optic Products GmbH</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Fiber Objective</td>
			<td>Edmund Optics GmbH</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Faraday Isolator</td>
			<td>Electro-Optics Technology, Inc</td>
			<td>EOT.189.12231</td>
			<td></td>
		</tr>
		<tr>
			<td>Faraday Rotator</td>
			<td>Electro-Optics Technology, Inc</td>
			<td>EOT.189.22040</td>
			<td></td>
		</tr>
		<tr>
			<td>Stretcher&#39;s Grating 1</td>
			<td>Horiba Jobin Yvon GmbH</td>
			<td>N/A, customized</td>
			<td>60*40*10 mm&#179;</td>
		</tr>
		<tr>
			<td>Stretcher&#39;s Grating 2</td>
			<td>Horiba Jobin Yvon GmbH</td>
			<td>N/A, customized</td>
			<td>350*190*50 mm&#179;</td>
		</tr>
		<tr>
			<td>Compressor&#39;s Grating 1</td>
			<td>Plymouth Grating Laboratory, Inc.</td>
			<td>N/A, customized</td>
			<td>40*40*16 mm&#179;</td>
		</tr>
		<tr>
			<td>Compressor&#39;s Grating 2</td>
			<td>Plymouth Grating Laboratory, Inc.</td>
			<td>N/A, customized</td>
			<td>300*100*50 mm&#179;</td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (1030nm), flat, 0&#176;</td>
			<td>Layertec GmbH</td>
			<td>108060</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (1030nm), flat, 0&#176;</td>
			<td>Laseroptik GmbH</td>
			<td>B-09965, S-04484</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (1030nm), flat, 45&#176;</td>
			<td>Layertec GmbH</td>
			<td>108063</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (1030nm), flat, 45&#176;</td>
			<td>Laseroptik GmbH</td>
			<td>B-09966, S-04484</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (1030nm), curved</td>
			<td>Layertec GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>HR Mirror, 2&#34; (1030nm), flat, 0&#176;</td>
			<td>Laseroptik GmbH</td>
			<td>B-09965, S-05474</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 2&#34; (1030nm), flat, 45&#176;</td>
			<td>Laseroptik GmbH</td>
			<td>B-09966, S-05474</td>
			<td></td>
		</tr>
		<tr>
			<td>Thin Film Polarizer (1030nm), 2&#34;</td>
			<td>Layertec GmbH</td>
			<td>103930</td>
			<td></td>
		</tr>
		<tr>
			<td>Waveplate L/2 (1030nm)</td>
			<td>Layertec GmbH</td>
			<td>106058</td>
			<td>&#216;=25mm</td>
		</tr>
		<tr>
			<td>Waveplate L/4 (1030nm)</td>
			<td>Layertec GmbH</td>
			<td>106060</td>
			<td>&#216;=25mm</td>
		</tr>
		<tr>
			<td>AR Window (1030nm), wedge</td>
			<td>Laseroptik GmbH</td>
			<td>B-00183-01, S-00988</td>
			<td>&#216;=38mm</td>
		</tr>
		<tr>
			<td>Output Coupler, 1&#34; (1030nm)</td>
			<td>Layertec GmbH</td>
			<td>N/A, customized</td>
			<td>PR = 88 %</td>
		</tr>
		<tr>
			<td>High-dispersion Mirror (1030nm)</td>
			<td>UltraFast Innovations GmbH</td>
			<td>N/A, customized</td>
			<td>GDD = -3000 fs&#178;</td>
		</tr>
		<tr>
			<td>Lens, 1&#34; (1030nm), Plano-Convex</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Lens, 1&#34; (1030nm), Plano-Concave</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Lens, 2&#34; (1030nm), Plano-Convex</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Lens, 2&#34; (1030nm), Plano-Concave</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), flat, 0&#176;</td>
			<td>Layertec GmbH</td>
			<td>129784</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), flat, 0&#176;</td>
			<td>Eksma Optics</td>
			<td>042-0515-i0</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), flat, 45&#176;</td>
			<td>Layertec GmbH</td>
			<td>110924</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), flat, 45&#176;</td>
			<td>Eksma Optics</td>
			<td>042-0515</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), curved</td>
			<td>Layertec GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>HR Mirror, 1&#34; (515nm), curved</td>
			<td>Eksma Optics</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>HR Mirror, 2&#34; (515nm), flat, 0&#176;</td>
			<td>Eksma Optics</td>
			<td>045-0515-i0</td>
			<td></td>
		</tr>
		<tr>
			<td>HR Mirror, 2&#34; (515nm), flat, 45&#176;</td>
			<td>Eksma Optics</td>
			<td>045-0515</td>
			<td></td>
		</tr>
		<tr>
			<td>Thin Film Polarizer (515nm), 2&#34;</td>
			<td>Layertec GmbH</td>
			<td>112544</td>
			<td></td>
		</tr>
		<tr>
			<td>Waveplate L/2 (515nm)</td>
			<td>Layertec GmbH</td>
			<td>112546</td>
			<td>&#216;=25mm</td>
		</tr>
		<tr>
			<td>Lens, 1&#34; (515nm), Plano-Convex</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Lens, 1&#34; (515nm), Plano-Concave</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Kerr Medium</td>
			<td>Meller Optics, Inc.</td>
			<td>N/A, customized</td>
			<td>Sapphire, 1mm</td>
		</tr>
		<tr>
			<td>BBO Crystal</td>
			<td>Castech Inc.</td>
			<td>N/A, customized</td>
			<td>7*7*1.5 mm&#179;</td>
		</tr>
		<tr>
			<td>Harmonic Separator, 1&#34;, 45&#176;</td>
			<td>Eksma Optics</td>
			<td>042-5135</td>
			<td></td>
		</tr>
		<tr>
			<td>Harmonic Separator, 2&#34;, 45&#176;</td>
			<td>Eksma Optics</td>
			<td>045-5135</td>
			<td></td>
		</tr>
		<tr>
			<td>Silver Mirror, 1&#34;, flat</td>
			<td>Thorlabs GmbH</td>
			<td>PF10-03-P01</td>
			<td></td>
		</tr>
		<tr>
			<td>Silver Mirror, 1&#34;, curved</td>
			<td>Eksma Optics</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Filter - Absorptive Neutral Density</td>
			<td>Thorlabs GmbH</td>
			<td>NE##A</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Filter - Reflective Neutral Density</td>
			<td>Thorlabs GmbH</td>
			<td>ND##A</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Filter - Round Continuously Variable</td>
			<td>Thorlabs GmbH</td>
			<td>NDC-50C-4M</td>
			<td></td>
		</tr>
		<tr>
			<td>Filter - Edgepass Filter (Longpass)</td>
			<td>Thorlabs GmbH</td>
			<td>FEL####</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Filter - Edgepass Filter (Shortpass)</td>
			<td>Thorlabs GmbH</td>
			<td>FES####</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Wedge</td>
			<td>Thorlabs GmbH</td>
			<td>N/A, customized</td>
			<td>set</td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Optomechanics &#38; Motion</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mirror Mount 1&#34; (small)</td>
			<td>S. Maier GmbH</td>
			<td>S1M4-##-1&#8221;</td>
			<td></td>
		</tr>
		<tr>
			<td>Mirror Mount 1&#34; (large)</td>
			<td>S. Maier GmbH</td>
			<td>S3-##</td>
			<td></td>
		</tr>
		<tr>
			<td>Mirror Mount 1&#34;</td>
			<td>TRUMPF Scientific Lasers&#160;</td>
			<td>1&#34; adjustable&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>Mirror Mount 2&#34;</td>
			<td>S. Maier GmbH</td>
			<td>S4-##</td>
			<td></td>
		</tr>
		<tr>
			<td>Mirror Mount 2&#34;</td>
			<td>TRUMPF Scientific Lasers&#160;</td>
			<td>2&#34; adjustable&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotation Mount 1&#8221;</td>
			<td>S. Maier GmbH</td>
			<td>D25</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotation Mount 1&#8221;</td>
			<td>Thorlabs GmbH</td>
			<td>RSP1/M</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotation Mount 2&#8221;</td>
			<td>Thorlabs GmbH</td>
			<td>RSP2/M</td>
			<td></td>
		</tr>
		<tr>
			<td>Precision Rotation Stage</td>
			<td>Newport Corporation</td>
			<td>M-UTR120</td>
			<td></td>
		</tr>
		<tr>
			<td>Four-Axis Diffraction Grating Mount</td>
			<td>Newport Corporation</td>
			<td>DGM-1</td>
			<td></td>
		</tr>
		<tr>
			<td>Translation Stage</td>
			<td>OptoSigma Corporation</td>
			<td>TADC-651SR25-M6</td>
			<td></td>
		</tr>
		<tr>
			<td>Pockels cell stage</td>
			<td>Newport Corporation</td>
			<td>9082-M</td>
			<td></td>
		</tr>
		<tr>
			<td>Pockels Cell Holder</td>
			<td>Home-made</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Picomotor Controller/Driver Kit</td>
			<td>Newport Corporation</td>
			<td>8742-12-KIT</td>
			<td></td>
		</tr>
		<tr>
			<td>Picomotor Piezo Linear Actuators</td>
			<td>Newport Corporation</td>
			<td>8301NF</td>
			<td></td>
		</tr>
		<tr>
			<td>Picomotor Rotation Mount</td>
			<td>Newport Corporation</td>
			<td>8401-M</td>
			<td></td>
		</tr>
		<tr>
			<td>Hand Control Pad</td>
			<td>Newport Corporation</td>
			<td>8758</td>
			<td></td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Light Analysis</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Beam Profiling Camera</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>SP620</td>
			<td></td>
		</tr>
		<tr>
			<td>Beam Profiling Camera</td>
			<td>DataRay Inc.</td>
			<td>WCD-UCD23</td>
			<td></td>
		</tr>
		<tr>
			<td>Photodiodes (solw)</td>
			<td>Thorlabs GmbH</td>
			<td>DET10A/M</td>
			<td></td>
		</tr>
		<tr>
			<td>Photodiodes (fast)</td>
			<td>Alphalas GmbH</td>
			<td>UPD-200-SP</td>
			<td></td>
		</tr>
		<tr>
			<td>Thin-disk Camera</td>
			<td>Imaging Development Systems GmbH</td>
			<td>UI-2220SE-M-GL</td>
			<td></td>
		</tr>
		<tr>
			<td>Oscilloscope</td>
			<td>Tektronix GmbH</td>
			<td>DPO5204</td>
			<td></td>
		</tr>
		<tr>
			<td>Oscilloscope</td>
			<td>Teledyne LeCroy GmbH</td>
			<td>SDA 760Zi-A</td>
			<td></td>
		</tr>
		<tr>
			<td>Spectrometer</td>
			<td>Avantes</td>
			<td>AvaSpec-ULS3648-USB2</td>
			<td></td>
		</tr>
		<tr>
			<td>Spectrometer</td>
			<td>Ocean Optics, Inc</td>
			<td>HR4C1769</td>
			<td></td>
		</tr>
		<tr>
			<td>Spectrometer</td>
			<td>Ocean Optics, Inc</td>
			<td>HR4C3762</td>
			<td></td>
		</tr>
		<tr>
			<td>Spectrometer</td>
			<td>Ocean Optics, Inc</td>
			<td>HR4D464</td>
			<td></td>
		</tr>
		<tr>
			<td>Spectrometer</td>
			<td>Ocean Optics, Inc</td>
			<td>HR4D466</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Thermal Power Sensor</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>L50(150)A-PF-35</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Thermal Power Sensor</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>FL500A</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Thermal Power Sensor</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>3A-P-V1</td>
			<td></td>
		</tr>
		<tr>
			<td>Power and Energy Meter</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>Vega</td>
			<td></td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Systems</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Beam Stabilization System</td>
			<td>TEM-Messtechnik GmbH</td>
			<td>Aligna</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser M&#178; Measuring System</td>
			<td>Ophir Optronics Solutions Ltd</td>
			<td>M&#178;-200s</td>
			<td></td>
		</tr>
		<tr>
			<td>FROG</td>
			<td>Home-made</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>XFROG</td>
			<td>Home-made</td>
			<td>N/A, customized</td>
			<td></td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Miscellaneous</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Cooling Chiller</td>
			<td>H.I.B Systemtechnik GmbH</td>
			<td>6HE-000800-W-W-R23-2-DI</td>
			<td></td>
		</tr>
		<tr>
			<td>Cooling Chiller</td>
			<td>Termotek GmbH</td>
			<td>P201</td>
			<td></td>
		</tr>
		<tr>
			<td>Cooling Chiller</td>
			<td>Termotek GmbH</td>
			<td>P208</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Safety Goggles</td>
			<td>Protect - Laserschutz GmbH</td>
			<td>BGU 10-0165-G-20</td>
			<td></td>
		</tr>
		<tr>
			<td>Infra-red Viewer</td>
			<td>FJW Optical Systems</td>
			<td>84499A</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Viewing Card</td>
			<td>Thorlabs GmbH</td>
			<td>VRC4</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Viewing Card</td>
			<td>Thorlabs GmbH</td>
			<td>VRC5</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser Viewing Card</td>
			<td>Laser Components GmbH</td>
			<td>LDT-1064 BG</td>
			<td></td>
		</tr>
		<tr>
			<td>Flowmeter</td>
			<td>KOBOLD Messring GmbH</td>
			<td>DTK-1250G2C34P</td>
			<td></td>
		</tr>
		<tr>
			<td>Pressure Gauge</td>
			<td>KOBOLD Messring GmbH</td>
			<td>EN 837-1</td>
			<td></td>
		</tr>
		<tr>
			<td>Temperature Sensor</td>
			<td>KOBOLD Messring GmbH</td>
			<td>TDA-15H* ***P3M</td>
			<td></td>
		</tr>
		<tr>
			<td>WinLase Software</td>
			<td>Dr. C. Horvath &#38; Dr. F. Loesel</td>
			<td>WinLase Version 2.1 pro.</td>
			<td>Laser Cavity Software</td>
		</tr>
	</tbody>
</table>

20 mj, 1 ps yb:yag thin-disk regenerative amplifier

Se trata de un informe sobre un amplificador regenerativo de disco fino Yb: YAG de 100 W, 20 mJ, 1 ps Yb: YAG. Un Yb: YAG hecho en casa Yb: YR, Kerr-lente oscilador de modo de bloqueo de modo con el rendimiento de llave en mano y la energía de pulso de nivel de microjoule se utiliza para sembrar el amplificador regenerativo de pulso chirpado. El amplificador se coloca en una carcasa hermética. Funciona a temperatura ambiente y exhibe un funcionamiento estable a una frecuencia de repetición de 5 kHz, con una estabilidad de impulso a impulso inferior al 1%. Mediante el empleo de un cristal de borato beta de bario de 1,5 mm de espesor, la frecuencia de la salida del láser se duplica a 515 nm, con una potencia media de 70 W, lo que corresponde a un rendimiento óptico-óptico del 70%. Este rendimiento superior hace que el sistema sea una atractiva fuente de bombas para amplificadores de pulso de chirrido paramétrico óptico en el rango espectral del infrarrojo cercano y del infrarrojo medio. Combinando el rendimiento de llave en mano y la estabilidad superior del amplificador regenerativo, el sistema facilita la generación de una banda ancha, estable al CEPsemilla. Proporcionar la semilla y la bomba de la amplificación de impulso chirpado paramétrico óptico (OPCPA) de una fuente de láser elimina la demanda de sincronización temporal activa entre estos impulsos. Este trabajo presenta una guía detallada para configurar y operar un amplificador regenerativo de disco delgado Yb: YAG, basado en la amplificación de pulso chirpado (CPA), como una fuente de bomba para un amplificador óptico paramétrico de pulso chirpado.

<html> El oscilador de entrega 350 fs, 2 μJ, los pulsos 25-W en tasa de repetición de 11 MHz, con una estabilidad-impulso a impulso de 1% (rms) y las fluctuaciones de apuntamiento de haz de menos de 0,6% más de 1 h de medición (figura 4 ). <img alt="Figura 4" class="xfigimg" src="/files/ftp_upload/55717/55717fig4.jpg" /> Figura 4 : Yb: YAG de disco delgado, Kerr-lente de modo bloqueado oscilador. (A) El espectro (rojo), el perfil recuperado temporal intensidad (azul), y el perfil espacial (inserción) de los impulsos del oscilador. B ) Espectrógrafo SHG-FROG medido y recuperado del oscilador. Esta cifra ha sido modificada de Fattahi et al. , Con permiso de la referencia 21 .&gt; Haga clic aquí para ver una versión más grande de esta figura. Los impulsos de semilla se amplifican en el amplificador regenerativo a 125 W mientras se bombean con un diodo acoplado a fibra CW a una longitud de onda de 940 nm a 280 W, lo que corresponde a un rendimiento óptico-óptico del 47%. La estabilidad de impulso a impulso del amplificador es menor que 1%, y el amplificador presenta excelente estabilidad a largo plazo después de 10 h de funcionamiento continuo. El haz amplificado tiene un excelente perfil espacial, con una M 2 de 1 (M 2 x = 1,08 y M 2 y = 1,07) y un perfil temporal excelente después de la compresión a 1 ps (en FWHM) ( Figura 5 ). <img alt="Figura 5" class="xfigimg" src="/files/ftp_upload/55717/55717fig5.jpg" /> Figura 5 : Caracterización del amplificador regenerativoSalida y el efecto de reducción de ganancia. (A) La estabilidad de la potencia media amplificador regenerativo después de 10 h de operación continua. Inserción: ( a-1 ) Potencia normalizada a su valor medio en una ventana de tiempo de 0,5 h; (A -2 ) Perfil del haz de salida del amplificador regenerativo. ( B ) Espectro de salida del amplificador (verde) y la intensidad temporal recuperada (azul) de los impulsos láser a una potencia media de 100 W después del compresor de rejilla. ( C ) La energía de la semilla frente al ancho de banda espectral (FWHM) de la salida del amplificador y los desplazamientos redondos requeridos para la misma potencia media de salida a 300 W de potencia de la bomba. Esta cifra ha sido modificada de Fattahi et al. , Con permiso de la referencia 21 . <a href="http://ecsource.jove.com/files/ftp_upload/55717/55717fig5large.jpg" target="_blank">Haga clic aquí para ver una versión más grande de esta figura.</a> 25 . Se consideraron dos cristales diferentes con los siguientes parámetros: 1) un triborato de litio de tipo I de 6 mm de espesor (LBO), con un ángulo de concordancia de fase de 13,7 ° y un coeficiente no lineal de 0,819 pm / V, y 2) un Tipo I, de 3 mm de espesor BBO con un ángulo de adaptación de fase de 23,4 ° y un coeficiente no lineal de 2 pm / V 26 , 27 . 1-ps, 20-mJ pulsos a 1,030 nm y una intensidad de pico de 100 GW / cm 2 se consideraron como la entrada de la simulación. Los resultados de la simulación mostraron que el rendimiento de BBO fue superior al de la LBO para SHG ( Figura 6 ). <img alt="Figura 6" class="xfigimg" src="/files/ftp_upload/55717/55717fig6.jpg" /> Figura 6 : Generación del segundo armónico. (A) Simulated SHG enoRgy para un cristal LBO de 6 mm de espesor y un cristal BBO de 3 mm de espesor. ( B ) Rendimiento experimental de SHG frente a la intensidad máxima de la bomba de entrada en un cristal BBO de 1,5 mm de espesor usando 0,5 mJ (negro) y 20 mJ (verde) de la salida del amplificador. ( C ) La intensidad espectral recuperada y ( d ) el retraso grupal de las mediciones de XFROG para diferentes eficiencias SHG correspondientes a los puntos A, B y C en (b). Esta cifra ha sido modificada de Fattahi et al. , Con permiso de la referencia 21 . <a href="http://ecsource.jove.com/files/ftp_upload/55717/55717fig6large.jpg" target="_blank">Haga clic aquí para ver una versión más grande de esta figura.</a>

Watch this Scientific Journal Video about 20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier at JoVE.com

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier

Se presenta aquí un protocolo para el funcionamiento de una fuente de bomba de amplificador de pulso de chirpómetro óptico de alta energía y alta potencia basada en un amplificador regenerativo de disco fino Yb: YAG.

20 mJ, 1 ps Yb: YAG amplificador regenerativo de disco delgado

This is a report on a 100 W, 20 mJ, 1 ps Yb:YAG thin-disk regenerative amplifier. A homemade Yb:YAG thin-disk, Kerr-lens mode-locked oscillator with ...

20-mj-1-ps-ybyag-thin-disk-regenerative-amplifier

Research

Education

JoVE Core

JoVE Journal

Electrical Engineering

Bioengineering

Unit 1

Power Distributions

SCIENTISTS IN ACTION

11.4K vistas.  Ludwig Maximilian University of Munich.  Se presenta aquí un protocolo para el funcionamiento de una fuente de bomba de amplificador de pulso de chirpómetro óptico de alta energía y alta potencia basada en un amplificador regenerativo de disco fino Yb: YAG. 

Video: 20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier

Microfluidic Picoliter Bioreactor for Microbial Single-cell Analysis: Fabrication, System Setup, and Operation

In this protocol the fabrication, experimental setup and basic operation of the recently introduced microfluidic picoliter bioreactor (PLBR) is described in detail. The PLBR can be utilized for the analysis of single bacteria and microcolonies to investigate biotechnological and microbiological related questions concerning, e.g.&#160;cell growth, morphology, stress response, and metabolite or protein production on single-cell level. The device features continuous media flow enabling constant environmental conditions for perturbation studies, but in addition allows fast medium changes as well as oscillating conditions to mimic any desired environmental situation. To fabricate the single use devices, a silicon wafer containing sub micrometer sized SU-8 structures served as the replication mold for rapid polydimethylsiloxane casting. Chips were cut, assembled, connected, and set up onto a high resolution and fully automated microscope suited for time-lapse imaging, a powerful tool for spatio-temporal cell analysis. Here, the biotechnological platform organism Corynebacterium glutamicum&#160;was seeded into the PLBR and cell growth and intracellular fluorescence were followed over several hours unraveling time dependent population heterogeneity on single-cell level, not possible with conventional analysis methods such as flow cytometry. Besides insights into device fabrication, furthermore, the preparation of the preculture, loading, trapping of bacteria, and the PLBR cultivation of single cells and colonies is demonstrated. These devices will add a new dimension in microbiological research to analyze time dependent phenomena of single bacteria under tight environmental control. Due to the simple and relatively short fabrication process the technology can be easily adapted at any microfluidics lab and simply tailored towards specific needs.

In this protocol the fabrication, setup and basic operation of a microfluidic picoliter bioreactor (PLBR) for single-cell analysis of prokaryotic microorganisms is introduced. Industrially relevant microorganisms were analyzed as proof of principle allowing insights into growth rate, morphology, and phenotypic heterogeneity over certain time periods, hardly possible with conventional methods.

In this protocol the fabrication, experimental setup and basic operation of the recently introduced microfluidic picoliter bioreactor (PLBR) is described ...

Investigación

Bioingeniería

Harmonic Nanoparticles for Regenerative Research

In this visualized experiment, protocol details are provided for in vitro labeling of human embryonic stem cells (hESC) with second harmonic generation nanoparticles (HNPs). The latter are a new family of probes recently introduced for labeling biological samples for multi-photon imaging. HNPs are capable of doubling the frequency of excitation light by the nonlinear optical process of second harmonic generation with no restriction on the excitation wavelength.
Multi-photon based methodologies for hESC differentiation into cardiac clusters (maintained as long term air-liquid cultures) are presented in detail. In particular, evidence on how to maximize the intense second harmonic (SH) emission of isolated HNPs during 3D monitoring of beating cardiac tissue in 3D is shown. The analysis of the resulting images to retrieve 3D displacement patterns is also detailed.

Protocol details are provided for in vitro labeling human embryonic stem cells with second harmonic generating nanoparticles. Methodologies for hESC investigation by multi-photon microscopy and their differentiation into cardiac clusters are also presented.

Armónica Nanopartículas para Regenerativa de Investigación

In this visualized experiment, protocol details are provided for in vitro labeling of human embryonic stem cells (hESC) with second harmonic generation ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models reflect the human wound situation better than animal models. Although two-dimensional models are widely used to investigate processes such as cellular migration and proliferation, models that are more complex are required to gain a deeper knowledge about wound healing. Besides a suitable model system, the generation of precise and reproducible wounds is crucial to ensure comparable results between different test runs. In this study, the generation of a three-dimensional full thickness skin equivalent to study wound healing is shown. The dermal part of the models is comprised of human dermal fibroblast embedded in a rat-tail collagen type I hydrogel. Following the inoculation with human epidermal keratinocytes and consequent culture at the air-liquid interface, a multilayered epidermis is formed on top of the models. To study the wound healing process, we additionally developed an automated wounding device, which generates standardized wounds in a sterile atmosphere.

The goal of this protocol is to build up a three-dimensional full thickness skin equivalent, which resembles natural skin. With a specifically constructed automated wounding device, precise and reproducible wounds can be generated under maintenance of sterility.

Generación de una tridimensional grosor de la piel completa y automatizada Equivalente Heridas

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

Neonatal Cardiac Scaffolds: Novel Matrices for Regenerative Studies

The only definitive therapy for end stage heart failure is orthotopic heart transplantation. Each year, it is estimated that more than 100,000 donor hearts are needed for cardiac transplantation procedures in the United States1-2. Due to the limited numbers of donors, only approximately 2,400 transplants are performed each year in the U.S.2. Numerous approaches, from cell therapy studies to implantation of mechanical assist devices, have been undertaken, either alone or in combination, in an attempt to coax the heart to repair itself or to rest the failing heart3. In spite of these efforts, ventricular assist devices are still largely used for the purpose of bridging to transplantation and the utility of cell therapies, while they hold some curative promise, is still limited to clinical trials. Additionally, direct xenotransplantation has been attempted but success has been limited due to immune rejection. Clearly, another strategy is required to produce additional organs for transplantation and, ideally, these organs would be autologous so as to avoid the complications associated with rejection and lifetime immunosuppression. Decellularization is a process of removing resident cells from tissues to expose the native extracellular matrix (ECM) or scaffold. Perfusion decellularization offers complete preservation of the three dimensional structure of the tissue, while leaving the bulk of the mechanical properties of the tissue intact4. These scaffolds can be utilized for repopulation with healthy cells to generate research models and, possibly, much needed organs for transplantation. We have exposed the scaffolds from neonatal mice (P3), known to retain remarkable cardiac regenerative capabilities,5-8 to detergent mediated decellularization and we repopulated these scaffolds with murine cardiac cells. These studies support the feasibility of engineering a neonatal heart construct. They further allow for the investigation as to whether the ECM of early postnatal hearts may harbor cues that will result in improved recellularization strategies.

In these studies, we provide methodology for novel, neonatal, murine cardiac scaffolds for use in regenerative studies.

Los andamios neonatal cardíaca: Matrices novedosos para Estudios regenerativos

The only definitive therapy for end stage heart failure is orthotopic heart transplantation.  Each year, it is estimated that more than 100,000 donor ...

Studying Soft-matter and Biological Systems over a Wide Length-scale from Nanometer and Micrometer Sizes at the Small-angle Neutron Diffractometer KWS-2

The KWS-2 SANS diffractometer is dedicated to the investigation of soft matter and biophysical systems covering a wide length scale, from nm to &#181;m. The instrument is optimized for the exploration of the wide momentum transfer Q range between 1x10-4 and 0.5 &#197;-1 by combining classical pinhole, focusing (with lenses), and time-of-flight (with chopper) methods, while simultaneously providing high-neutron intensities with an adjustable resolution. Because of its ability to adjust the intensity and the resolution within wide limits during the experiment, combined with the possibility to equip specific sample environments and ancillary devices, the KWS-2 shows a high versatility in addressing the broad range of structural and morphological studies in the field. Equilibrium structures can be studied in static measurements, while dynamic and kinetic processes can be investigated over time scales between minutes to tens of milliseconds with time-resolved approaches. Typical systems that are investigated with the KWS-2 cover the range from complex, hierarchical systems that exhibit multiple structural levels (e.g., gels, networks, or macro-aggregates) to small and poorly-scattering systems (e.g., single polymers or proteins in solution). The recent upgrade of the detection system, which enables the detection of count rates in the MHz range, opens new opportunities to study even very small biological morphologies in buffer solution with weak scattering signals close to the buffer scattering level at high Q.
In this paper, we provide a protocol to investigate samples with characteristic size levels spanning a wide length scale and exhibiting ordering in the mesoscale structure using KWS-2. We present in detail how to use the multiple working modes that are offered by the instrument and the level of performance that is achieved.

Here, we present a protocol to investigate soft matter and biophysical systems over a wide mesoscopic length scale, from nm to &#181;m that involves the use of the KWS-2 SANS diffractometer at high intensities and an adjustable resolution.

El estudio de la materia y Soft-Sistemas Biológicos en un amplio Longitud escala del nanómetro y el micrómetro Tamaños en el pequeño ángulo de neutrones difractómetro KWS-2

The KWS-2 SANS diffractometer is dedicated to the investigation of soft matter and biophysical systems covering a wide length scale, from nm to &#181;m. ...

3D Microtissues for Injectable Regenerative Therapy and High-throughput Drug Screening

To upgrade traditional 2D cell culture to 3D cell culture, we have integrated microfabrication with cryogelation technology to produce macroporous microscale cryogels (microcryogels), which can be loaded with a variety of cell types to form 3D microtissues. Herein, we present the protocol to fabricate versatile 3D microtissues and their applications in regenerative therapy and drug screening. Size and shape-controllable microcryogels can be fabricated on an array chip, which can be harvested off-chip as individual cell-loaded carriers for injectable regenerative therapy or be further assembled on-chip into 3D microtissue arrays for high-throughput drug screening. Due to the high elastic nature of these microscale cryogels, the 3D microtissues exhibit great injectability for minimally invasive cell therapy by protecting cells from mechanical shear force during injection. This ensures enhanced cell survival and therapeutic effect in the mouse limb ischemia model. Meanwhile, assembly of 3D microtissue arrays in a standard 384-multi-well format facilitates the use of common laboratory facilities and equipment, enabling high-throughput drug screening on this versatile 3D cell culture platform.

This protocol describes the fabrication of elastic 3D macroporous microcryogels by integrating microfabrication with cryogelation technology. Upon loading with cells, 3D microtissues are generated, which can be readily injected in vivo to facilitate regenerative therapy or assembled into arrays for in vitro high-throughput drug screening.

Microtissues 3D para la terapia regenerativa inyectable y drogas de alto rendimiento

To upgrade traditional 2D cell culture to 3D cell culture, we have integrated microfabrication with cryogelation technology to produce macroporous ...

Generic Protocol for Optimization of Heterologous Protein Production Using Automated Microbioreactor Technology

A core business in industrial biotechnology using microbial production cell factories is the iterative process of strain engineering and optimization of bioprocess conditions. One important aspect is the improvement of cultivation medium to provide an optimal environment for microbial formation of the product of interest. It is well accepted that the media composition can dramatically influence overall bioprocess performance. Nutrition medium optimization is known to improve recombinant protein production with microbial systems and thus, this is a rewarding step in bioprocess development. However, very often standard media recipes are taken from literature, since tailor-made design of the cultivation medium is a tedious task that demands microbioreactor technology for sufficient cultivation throughput, fast product analytics, as well as support by lab robotics to enable reliability in liquid handling steps. Furthermore, advanced mathematical methods are required for rationally analyzing measurement data and efficiently designing parallel experiments such as to achieve optimal information content.
The generic nature of the presented protocol allows for easy adaption to different lab equipment, other expression hosts, and target proteins of interest, as well as further bioprocess parameters. Moreover, other optimization objectives like protein production rate, specific yield, or product quality can be chosen to fit the scope of other optimization studies. The applied Kriging Toolbox (KriKit) is a general tool for Design of Experiments (DOE) that contributes to improved holistic bioprocess optimization. It also supports multi-objective optimization which can be important in optimizing both upstream and downstream processes.

This manuscript describes a generic approach for tailor-made design of microbial cultivation media. This is enabled by an iterative workflow combining Kriging-based experimental design and microbioreactor technology for sufficient cultivation throughput, which is supported by lab robotics to increase reliability and speed in liquid handling media preparation.

Protocolo genérico para la optimización de la producción de proteína heteróloga utilizando tecnología Microbioreactor automatizada

A core business in industrial biotechnology using microbial production cell factories is the iterative process of strain engineering and optimization of ...

Recombinant Collagen I Peptide Microcarriers for Cell Expansion and Their Potential Use As Cell Delivery System in a Bioreactor Model

Tissue engineering is a promising field, focused on developing solutions for the increasing demand on tissues and organs regarding transplantation purposes. The process to generate such tissues is complex, and includes an appropriate combination of specific cell types, scaffolds, and physical or biochemical stimuli to guide cell growth and differentiation. Microcarriers represent an appealing tool to expand cells in a three-dimensional (3D) microenvironment, since they provide higher surface-to volume ratios and mimic more closely the in vivo situation compared to traditional two-dimensional methods. The vascular system, supplying oxygen and nutrients to the cells and ensuring waste removal, constitutes an important building block when generating engineered tissues. In fact, most constructs fail after being implanted due to lacking vascular support. In this study, we present a protocol for endothelial cell expansion on recombinant collagen-based microcarriers under dynamic conditions in spinner flask and bioreactors, and we explain how to determine in this setting cell viability and functionality. In addition, we propose a method for cell delivery for vascularization purposes without additional detachment steps necessary. Furthermore, we provide a strategy to evaluate the cell vascularization potential in a perfusion bioreactor on a decellularized&#160;biological matrix. We believe that the use of the presented methods could lead to the development of new cell-based therapies for a large range of tissue engineering applications in the clinical practice.

We propose a cell expansion protocol on macroporous microcarriers and their use as delivery system in a perfusion bioreactor to seed a decellularized tissue matrix. We also include different techniques to determine cell proliferation and viability of cells cultured on microcarriers. Furthermore, we demonstrate functionality of cells after bioreactor cultures.

Recombinante colágeno péptido Microcarriers para la extensión celular y su posible uso como sistema de células en un biorreactor modelo

Tissue engineering is a promising field, focused on developing solutions for the increasing demand on tissues and organs regarding transplantation ...

Construction of a Multilayered Mesenchymal Stem Cell Sheet with a 3D Dynamic Culture System

Stem cell therapy shows a promising future in regenerating injured organ and tissues, and the cell sheet technique has been developed to improve the low cell retention and poor survival within the target zone. However, during the in vitro construction process, a solution for maintaining stem cell bioactivity and increasing the cell amount within the cell sheet is urgently needed. Here, this protocol presents a method for constructing a multilayered cell sheet with favorable stem cell bioactivity and optimal operability. Decellularized porcine pericardium (DPP) is prepared by phospholipase A2 (PLA2) decellularization method as the cell sheet scaffold, and rat bone marrow mesenchymal stem cells (BMSCs) are isolated and expanded as the seeded cells. The temporary multilayered cell sheet structure is constructed by using RAD16-I peptide hydrogel. Finally, the cell sheet is cultured with a dynamic perfusion system to stabilize the three-dimensional (3D) structure, and the cell sheet could be obtained following a 48-hour culture in vitro. This protocol provides an efficient and feasible method for constructing a multilayered stem cell sheet, and the cell sheet could be developed as a favorable stem cell therapy product in the future.

This article provides an efficient and feasible method for constructing multilayered stem cell sheets with favorable stem cell property.

Construcción de una hoja de varias capas células madre mesenquimales con un sistema de cultivo dinámico 3D

Stem cell therapy shows a promising future in regenerating injured organ and tissues, and the cell sheet technique has been developed to improve the low ...

Fabrication of the Composite Regenerative Peripheral Nerve Interface (C-RPNI) in the Adult Rat

Recent advances in neuroprosthetics have enabled those living with extremity loss to reproduce many functions native to the absent extremity, and this is often accomplished through integration with the peripheral nervous system. Unfortunately, methods currently employed are often associated with significant tissue damage which prevents prolonged use. Additionally, these devices often lack any meaningful degree of sensory feedback as their complex construction dampens any vibrations or other sensations a user may have previously depended on when using more simple prosthetics. The composite regenerative peripheral nerve interface (C-RPNI) was developed as a stable, biologic construct with the ability to amplify efferent motor nerve signals while providing simultaneous afferent sensory feedback. The C-RPNI consists of a segment of free dermal and muscle graft secured around a target mixed sensorimotor nerve, with preferential motor nerve reinnervation of the muscle graft and sensory nerve reinnervation of the dermal graft. In rats, this construct has demonstrated the generation of compound muscle action potentials (CMAPs), amplifying the target nerve&#39;s signal from the micro- to milli-volt level, with signal to noise ratios averaging approximately 30-50. Stimulation of the dermal component of the construct generates compound sensory nerve action potentials (CSNAPs) at the proximal nerve. As such, this construct has promising future utility towards the realization of the ideal, intuitive prosthetic.

Fabrication of the Composite Regenerative Peripheral Nerve Interface C-RPNI in the Adult Rat

The following manuscript describes a novel method for developing a biologic, closed loop neural feedback system termed the composite regenerative peripheral nerve interface (C-RPNI). This construct has the ability to integrate with peripheral nerves to amplify efferent motor signals while simultaneously providing afferent sensory feedback.

Fabricación de la interfaz nerviosa periférica regenerativa compuesta (C-RPNI) en la rata adulta

Recent advances in neuroprosthetics have enabled those living with extremity loss to reproduce many functions native to the absent extremity, and this is ...