reductive-electropolymerization-vinyl-containing-poly-pyridyl-complex

Reductive Electropolymerization of a Vinyl-containing Poly-pyridyl Complex on Glassy Carbon and Fluorine-doped Tin Oxide Electrodes

Controllable electrode surface modification is important in a number of fields, especially those with solar fuels applications. Electropolymerization is ...

Virginia Military Institute

Pyridine borane is combined with TpW(NO)(PMe(3))(eta(2)-benzene) to form a complex of the heterocycle, which upon treatment with acetone and acid yields the pyridinium complex [TpW(NO)(PMe(3))(eta(2)-pyH(+))]OTf. Deprotonation in the presence of acetic anhydride delivers the N-acetylpyridinium complex as a 10:1 mixture of coordination diastereomers. This acylpyridinium resists reaction with water or oxygen but readily reacts with acetone, pyrrole, indole, or acrolein and a weak base to stereoselectively form 1,2-dihydropyridine complexes. Treatment of the indole-derived analogue with CuBr(2) results in liberation of 3-(pyridin-2-yl)-1H-indole.

Efficient synthesis of an eta2-pyridine complex and a preliminary investigation of the bound heterocycle's reactivity.

The N-acetylpyridinium complex of {TpW(NO)(PMe3)} undergoes regio- and stereoselective reactions with a broad range of common organic nucleophiles, providing a family of 1,2-dihydropyridine (DHP) complexes of the form TpW(NO)(PMe3)(3,4-η(2)-DHP). The present study explores the elaboration of these systems into novel piperidines. The addition of an acid to the DHP complexes generates highly asymmetric π-allyl complexes that in turn react with a second nucleophile at either C3 or C5. The subsequent oxidative decomplexation of these materials yields several piperidinamides with unconventional substitution patterns.

Polarization of the pyridine ring: highly functionalized piperidines from tungsten-pyridine complex.

A new method for the preparation of functionalized piperidines is described in which various dihydropyridine (DHP) complexes of {TpW(NO)(PMe(3))} that are derived from pyridine-borane undergo [4 + 2] cyclocondensation with enones, enals, nitrosobenzene, and several isocyanates to form [2.2.2] bicyclic species. In several cases the diazabicyclooctene products derived from DHP complexes and isocyanates can be further elaborated into novel syn-2,5-disubstituted and 2,3,6-trisubstituted piperidinamides.

[4 + 2] Cyclocondensation reactions of tungsten-dihydropyridine complexes and the generation of tri- and tetrasubstituted piperidines.

Electrocatalytic reduction of CO(2) by [Ru(tpy)(bpy)(solvent)](2+) (tpy = 2,2':6',2''-terpyridine, bpy = 2,2'-bipyridine) and its structural analogs is initiated by sequential 1e(-) reductions at the tpy and bpy ligands followed by rate limiting CO(2) addition to give a metallocarboxylate intermediate. It undergoes further reduction and loss of CO.

Electrocatalytic reduction of CO2 to CO by polypyridyl ruthenium complexes.

The synthesis and analysis of a new amide-linked, dinuclear [Ru(bpy)(2)(bpy-ph-NH-CO-trpy)Ru(bpy)(OH(2))](4+) (bpy = 2,2'-bipyridine; bpy-ph-NH-CO-trpy = 4-(2,2':6',2"-terpyridin-4'-yl)-N-[(4'-methyl-2,2'-bipyridin-4-yl)methyl]benzamide) assembly that incorporates both a light-harvesting chromophore and a water oxidation catalyst are described. With the saturated methylene linker present, the individual properties of both the chromophore and catalyst are retained including water oxidation catalysis and relatively slow energy transfer from the chromophore excited state to the catalyst.

An amide-linked chromophore-catalyst assembly for water oxidation.

The performance of dye-sensitized solar and photoelectrochemical cells is strongly dependent on the electron transfer events at the electrode-sensitizer interface. Surface-bound peptides derivatized with chromophores have not been used in dye-sensitized solar and photoelectrochemical cells, but they have properties for these applications that could be advantageous by exploiting secondary structure and the attachment of multiple chromophores. In this manuscript, we have investigated structure-property relationships for three metallopeptide-based assemblies to solution and chemically bound to nanocrystalline MO(2) (M = Ti, Zr) films. A particular interest was exploring the influence of increasing separation distance between a common chromophore, [Ru(bpy)(2) (4-Me-4'-(NHCO)bpy)](2+) , and the underlying oxide substrate on excited and ground state electron transfer. Rates of Ru(II) oxidation to Ru(III) at the interface were measured by cyclic voltammetry on fluorine-doped tin oxide and cross-surface electron transfer on TiO(2) . Excited state injection by [Ru(III) (bpy)(2) (bpy(-) )](2+) was monitored by transient absorption and time-resolved emission. There are discernible trends in the electron transfer rate data with approximated, fully extended distances between the [Ru(bpy)(2) (4-Me-4'-(NHCO)bpy)](2+) sites and the interface. However, the distance dependences that are observed are smaller than anticipated, a result consistent with a lack of ordered secondary structure in the surface-bound peptide chains and a distribution of local orientations. For the surface-bound excited states, only a small fraction undergo quenching by electron transfer to TiO(2) , presumably from those oriented near the surface. © 2012 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 100: 25-37, 2013.

Electron transfer dynamics of peptide-derivatized Ru(II) -polypyridyl complexes on nanocrystalline metal oxide films.

The synthesis, characterization, and redox properties are described for a new ruthenium-based chromophore-catalyst assembly, [(bpy)(2)Ru(4-Mebpy-4'-bimpy)Ru(tpy)(OH(2))](4+) (1, [Ru(a)(II)-Ru(b)(II)-OH(2)](4+); bpy = 2,2'-bipyridine; 4-Mebpy-4'-bimpy = 4-(methylbipyridin-4'-yl)-N-benzimid-N'-pyridine; tpy = 2,2':6',2"-terpyridine), as its chloride salt. The assembly incorporates both a visible light absorber and a catalyst for water oxidation. With added ceric ammonium nitrate (Ce(IV), or CAN), both 1 and 2, [Ru(tpy)(Mebim-py)(OH(2))](2+) (Mebim-py = 2-pyridyl-N-methylbenzimidazole), catalyze water oxidation. Time-dependent UV/vis spectral monitoring following addition of 30 equiv of Ce(IV) reveals that the rate of Ce(IV) consumption is first order both in Ce(IV) and in an oxidized form of the assembly. The rate-limiting step appears to arise from slow oxidation of this intermediate followed by rapid release of O(2). This is similar to isolated catalyst 2, with redox potentials comparable to the [-Ru(b)-OH(2)](2+) site in 1, but 1 is more reactive than 2 by a factor of 8 due to a redox mediator effect.

Redox mediator effect on water oxidation in a ruthenium-based chromophore-catalyst assembly.

Reductive electropolymerization of [Ru(II)(PhTpy)(5,5'-dvbpy)(Cl)](PF6) and [Ru(II)(PhTpy)(5,5'-dvbpy)(MeCN)](PF6)2 (PhTpy is 4'-phenyl-2,2':6',2″-terpyridine; 5,5'-dvbpy is 5,5'-divinyl-2,2'-bipyridine) on glassy carbon electrodes gives well-defined films of poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(Cl)](PF6)} (poly-1) or poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(MeCN)](PF6)2} (poly-2). Oxidative cycling of poly-2 with added NO3(-) results in the replacement of coordinated MeCN by NO3(-) to give poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(NO3)](+)}, and with 0.1 M HClO4, replacement by H2O occurs to give poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(OH2)](2+)} (poly-OH2). Although analogous aqua complexes (e.g., [Ru(tpy)(bpy)(OH2)](2+)) undergo rapid loss of H2O to MeCN in solution, poly-OH2 and poly-OH2(+) are substitutionally inert in MeCN. The substitution chemistry is reversible, with reductive scans of poly-1 or poly-OH2 in MeCN resulting in poly-2, although with some loss of Faradaic response.

Coordination chemistry of single-site catalyst precursors in reductively electropolymerized vinylbipyridine films.

Metal particles were electrodeposited on a variety of conducting substrates, and their electrocatalytic activity toward H2O oxidation to O2 and H(+) reduction to H2 was evaluated. Co, Ni, Cu, Pd, Ag, and Pt were all electrodeposited on fluorine-doped tin oxide (FTO) electrodes. Particularly active were Pd and Pt for H(+) reduction and Co and Ag for H2O oxidation. When cycled reductively in 0.1 M HClO4, FTO electrodes derivatized with Pt and Pd reached current densities for hydrogen evolution of 18.3 and 13.2 mA/cm(2), respectively, at -0.6 V vs normal hydrogen electrode (NHE). FTO electrodes with electrodeposited Co or Ag were cycled oxidatively in H2O buffered to pH 7 with phosphate buffer. Current densities of 10.5 and 8.70 mA/cm(2), respectively, were reached at +1.8 V vs NHE with H2O oxidation onsets at +1.3 and +1.4 V, respectively. The impacts on catalytic stability and performance of electrodeposited metals in/on an electrically conductive polymer support were also investigated. Films of poly-[Fe(vbpy)3](PF6)2 (vbpy is 4-methyl-4'-vinyl-2,2'-bipyridine) were generated on FTO by reductive electropolymerization. Significant improvements to the long-term stability of electrodeposited Ag and Pt particles were observed in the poly-[Fe(vbpy)3](PF6)2 support. Films of poly-[M(vbpy)3](PF6)2 with M = Co(II) or Cu(II) were also prepared and evaluated as electrocatalysts for H2O oxidation. Films containing Co(II) reached current densities of 6.0 mA/cm(2) at +1.8 V vs NHE in H2O.

Strategies for stabilization of electrodeposited metal particles in electropolymerized films for H2O oxidation and H+ reduction.

The new complexes [Ir(Cp*)(phpy)3,5-bis(trifluoromethyl)benzonitrile](+) (1-NCAr(+)) and [Ir(Cp*)(phpy)(styrene)](+) (1-Sty(+), Cp* = η(5)-pentamethylcyclopentadienyl, phpy = 2-phenylene-κC(1')-pyridine-κN) were prepared as analogues of reported iridium water oxidation catalysts, to study their reactions with oxygen atom transfer (OAT) reagents at low temperatures. In no case was the desired product, an Ir(V)oxo complex, observed by spectroscopy. Instead, ligand oxidation was implicated. Oxidation of 1-NCAr(+) with the OAT reagent dimethyldioxirane (DMDO) yielded dioxygen when analyzed by GC, but formation of a heterogeneous or paramagnetic species was simultaneously observed. This amplifies uncertainty over the actual identity of iridium catalysts in the harsh oxidizing conditions required for water oxidation. Catalyst stability was then assessed for a reported styrene epoxidation mediated by [Ir(Cp*)(phpy)(OH2)](+) (1-OH2(+)). It was found that the OAT reagent iodosobenzene (PhIO) extensively oxidized the organic ligands of 1-OH2(+). Acetic acid was detected as a decomposition product. In addition, both the molecular structure and the aqueous electrochemistry of 1-OH2(+) are described for the first time. Oxidative scans revealed rapid decomposition of the complex. All of the above experiments indicate that degradation of the organic ligands in catalysts built with the Ir(Cp*)(phpy) framework are facile under oxidizing conditions. In separate experiments designed to promote ligand substitution, an unexpected silver-bridged, dinuclear Ir(III) species with terminal hydrides, [{Ir(Cp*)(phpy)H}2Ag](+) (2), was discovered. The source of Ag(+) for complex 2 was identified as AgCl.

Probing the oxidation chemistry of half-sandwich iridium complexes with oxygen atom transfer reagents.

A general electropolymerization/electro-oligomerization strategy is described for preparing spatially controlled, multicomponent films and surface assemblies having both light harvesting chromophores and water oxidation catalysts on metal oxide electrodes for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The chromophore/catalyst ratio is controlled by the number of reductive electrochemical cycles. Catalytic rate constants for water oxidation by the polymer films are similar to those for the phosphonated molecular catalyst on metal oxide electrodes, indicating that the physical properties of the catalysts are not significantly altered in the polymer films. Controlled potential electrolysis shows sustained water oxidation over multiple hours with no decrease in the catalytic current.

Daniel P. Harrison

Department of Chemistry

Virginia Military Institute

Reductive Electropolymerization of a Vinyl-containing Poly-pyridyl Complex on Glassy Carbon and Fluorine-doped Tin Oxide Electrodes

Daniel P. Harrison

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Chemistry

Virginia Military Institute

Reductive Electropolymerization of a Vinyl-containing Poly-pyridyl Complex on Glassy Carbon and Fluorine-doped Tin Oxide Electrodes

Department of Chemistry