Feiyu Kang

Towards practical application of paper based printed circuits: capillarity effectively enhances conductivity of the thermoplastic electrically conductive adhesives.

Unusual high oxygen reduction performance in all-carbon electrocatalysts.

Breakthrough of methyethylketone and benzene vapors in activated carbon fiber beds.

Pore structure and fractal characteristics of activated carbon fibers characterized by using HRTEM.

High-yield bamboo-shaped carbon nanotubes from cresol for electrochemical application.

Effect of growing CNTs onto bamboo charcoals on adsorption of copper ions in aqueous solution.

Selective microwave absorption of iron-rich carbon nanotube composites.

Synthesis and enhanced field-emission of thin-walled, open-ended, and well-aligned N-doped carbon nanotubes.

Surface-reconstructed graphite nanofibers as a support for cathode catalysts of fuel cells.

Adsorption of dimethyl sulfide from aqueous solution by a cost-effective bamboo charcoal.

Adsorption of lead(II) ions from aqueous solution on low-temperature exfoliated graphene nanosheets.

Effect of sulfur on enhancing nitrogen-doping and magnetic properties of carbon nanotubes.

Directly drawing self-assembled, porous, and monolithic graphene fiber from chemical vapor deposition grown graphene film and its electrochemical properties.

Energetic zinc ion chemistry: the rechargeable zinc ion battery.

Relation between the charge efficiency of activated carbon fiber and its desalination performance.

Preparation of ZnO/SiO2 gel composites and their performance of H2S removal at room temperature.

Preparation of highly oxidized nitrogen-doped carbon nanotubes.

Strong and reversible modulation of carbon nanotube-silicon heterojunction solar cells by an interfacial oxide layer.

Low-temperature synthesis of multilayer graphene/amorphous carbon hybrid films and their potential application in solar cells.

Glucose-promoted Zn-based metal-organic framework/graphene oxide composites for hydrogen sulfide removal.

Gassing in Li(4)Ti(5)O(12)-based batteries and its remedy.

Improvement of the hydrophilicity of electrospun porous carbon nanofibers by grafting phenylsulfonic acid groups.

Metallicity retained by covalent functionalization of graphene with phenyl groups.

Ultrathin amorphous manganese dioxide nanosheets synthesized with controllable width.

Direct prototyping of patterned nanoporous carbon: a route from materials to on-chip devices.

Porous mesocarbon microbeads with graphitic shells: constructing a high-rate, high-capacity cathode for hybrid supercapacitor.

Flexible asymmetric supercapacitors based on ultrathin two-dimensional nanosheets with outstanding electrochemical performance and aesthetic property.

Towards ultrahigh volumetric capacitance: graphene derived highly dense but porous carbons for supercapacitors.

Integrating porphyrin nanoparticles into a 2D graphene matrix for free-standing nanohybrid films with enhanced visible-light photocatalytic activity.

Facile synthesis of hierarchical porous γ-Al2O3 hollow microspheres for water treatment.

Highly crystalline lithium titanium oxide sheets coated with nitrogen-doped carbon enable high-rate lithium-ion batteries.

An interlaced silver vanadium oxide-graphene hybrid with high structural stability for use in lithium ion batteries.

A honeycomb-like porous carbon derived from pomelo peel for use in high-performance supercapacitors.

Synthesis of lithium iron phosphate/carbon microspheres by using polyacrylic acid coated iron phosphate nanoparticles derived from iron(III) acrylate.

Graphene/polyaniline woven fabric composite films as flexible supercapacitor electrodes.

Nitrogen-Enriched Porous Carbon Coating for Manganese Oxide Nanostructures toward High-Performance Lithium-Ion Batteries.

Electrospray-deposition of graphene electrodes: a simple technique to build high-performance supercapacitors.

Shape-Tailorable Graphene-Based Ultra-High-Rate Supercapacitor for Wearable Electronics.

Macroscopic 3D Porous Graphitic Carbon Nitride Monolith for Enhanced Photocatalytic Hydrogen Evolution.

Raman Evidence for Late Stage Disproportionation in a Li-O2 Battery.

Conformal Pad-Printing Electrically Conductive Composites onto Thermoplastic Hemispheres: Toward Sustainable Fabrication of 3-Cents Volumetric Electrically Small Antennas.

Fractal dendrite-based electrically conductive composites for laser-scribed flexible circuits.

Secondary batteries with multivalent ions for energy storage.

N and S co-doped porous carbon spheres prepared using L-cysteine as a dual functional agent for high-performance lithium-sulfur batteries.

A Metal-Free Supercapacitor Electrode Material with a Record High Volumetric Capacitance over 800 F cm(-3).

Ultrasensitive gas detection of large-area boron-doped graphene.

The Effect of Potassium Impurities Deliberately Introduced into Activated Carbon Cathodes on the Performance of Lithium-Oxygen Batteries.

Simultaneous Production of High-Performance Flexible Textile Electrodes and Fiber Electrodes for Wearable Energy Storage.

A Carbon-Sulfur Hybrid with Pomegranate-like Structure for Lithium-Sulfur Batteries.

Facile fabrication of organic/inorganic nanotube heterojunction arrays for enhanced photoelectrochemical water splitting.

Graphene Emerges as a Versatile Template for Materials Preparation.

An Ultralong, Highly Oriented Nickel-Nanowire-Array Electrode Scaffold for High-Performance Compressible Pseudocapacitors.

Buckybowls: Corannulene and Its Derivatives.

Highly Flexible Graphene/Mn3O4 Nanocomposite Membrane as Advanced Anodes for Li-Ion Batteries.

Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes.

Large Polarization of Li4Ti5O12 Lithiated to 0 V at Large Charge/Discharge Rates.

Ultrafine TiO2 Decorated Carbon Nanofibers as Multifunctional Interlayer for High-Performance Lithium-Sulfur Battery.

Breathable and Wearable Energy Storage Based on Highly Flexible Paper Electrodes.

Dual-functional hard template directed one-step formation of a hierarchical porous carbon-carbon nanotube hybrid for lithium-sulfur batteries.

Ultrasensitive Pressure Detection of Few-Layer MoS.

A Novel Lithiated Silicon-Sulfur Battery Exploiting an Optimized Solid-Like Electrolyte to Enhance Safety and Cycle Life.

Cellulose Nanofiber as a Distinct Structure-Directing Agent for Xylem-like Microhoneycomb Monoliths by Unidirectional Freeze-Drying.

Vapor-Phase Polymerized Poly(3,4-Ethylenedioxythiophene) on a Nickel Nanowire Array Film: Aqueous Symmetrical Pseudocapacitors with Superior Performance.

In-situ growth of MnO crystals under nanopore-constraint in carbon nanofibers and their electrochemical performance.

Noble-Metal-Free Hybrid Membranes for Highly Efficient Hydrogen Evolution.

A Composite Polymeric Carbon Nitride with In Situ Formed Isotype Heterojunctions for Highly Improved Photocatalysis under Visible Light.

A Lithium/Polysulfide Battery with Dual-Working Mode Enabled by Liquid Fuel and Acrylate-Based Gel Polymer Electrolyte.

Discovering a First-Order Phase Transition in the Li-CeO System.

Suppressing Self-Discharge and Shuttle Effect of Lithium-Sulfur Batteries with V O -Decorated Carbon Nanofiber Interlayer.

A Hollow Spherical Carbon Derived from the Spray Drying of Corncob Lignin for High-Rate-Performance Supercapacitors.

Dendrite-Free, High-Rate, Long-Life Lithium Metal Batteries with a 3D Cross-Linked Network Polymer Electrolyte.

Porphyrin-Based Nanostructures for Photocatalytic Applications.

A Dual-Function Na SO Template Directed Formation of Cathode Materials with a High Content of Sulfur Nanodots for Lithium-Sulfur Batteries.

High-Density Microporous LiTiO Microbars with Superior Rate Performance for Lithium-Ion Batteries.

Investigation of zinc ion storage of transition metal oxides, sulfides, and borides in zinc ion battery systems.

Surface Heterostructure Induced by PrPO Modification in Li[MnNiCo]O Cathode Material for High-Performance Lithium-Ion Batteries with Mitigating Voltage Decay.

Effects of Electrospun Carbon Nanofibers' Interlayers on High-Performance Lithium-Sulfur Batteries.

A High Performance Lithium-Ion Capacitor with Both Electrodes Prepared from Sri Lanka Graphite Ore.

Dendrite-Free Potassium-Oxygen Battery Based on a Liquid Alloy Anode.

Ultrafast-Charging and Long-Life Li-Ion Battery Anodes of TiO-B and Anatase Dual-Phase Nanowires.

A Facile Surface Reconstruction Mechanism toward Better Electrochemical Performance of LiTiO in Lithium-Ion Battery.

Caging tin oxide in three-dimensional graphene networks for superior volumetric lithium storage.

Directing lateral growth of lithium dendrites in micro-compartmented anode arrays for safe lithium metal batteries.

Green Synthesis of Hierarchically Porous Carbon Nanotubes as Advanced Materials for High-Efficient Energy Storage.

Rechargeable Aluminum-Ion Battery Based on MoS Microsphere Cathode.

Polymorphous Supercapacitors Constructed from Flexible Three-Dimensional Carbon Network/Polyaniline/MnO Composite Textiles.

Triaxial Nanocables of Conducting Polypyrrole@SnS@Carbon Nanofiber Enabling Significantly Enhanced Li-Ion Storage.

Sulfur-functionalized three-dimensional graphene monoliths as high-performance anodes for ultrafast sodium-ion storage.

Two-Dimensional MoS Confined Co(OH) Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes.