determining-surface-areas-and-pore-volumes-of-metal-organic-frameworks

Determining Surface Areas and Pore Volumes of Metal-Organic Frameworks

The surface area and pore volume of a metal-organic framework (MOF) can provide insight into its structure and potential applications. Both parameters are ...

Georgia Institute of Technology

Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.

How Reproducible are Surface Areas Calculated from the BET Equation?

Using adsorption isotherm data to determine heats of adsorption or predict mixture adsorption using the ideal adsorbed solution theory (IAST) relies on accurate fits of the data with continuous, mathematical models. Here, we derive an empirical two-parameter model to fit isotherm data of IUPAC types I, III, and V in a descriptive way based on the Bass model for innovation diffusion. We report 31 isotherm fits to existing literature data covering all six types of isotherms, various adsorbents, such as carbons, zeolites, and metal-organic frameworks (MOFs), as well as different adsorbing gases (water, carbon dioxide, methane, and nitrogen). We find several cases, especially for flexible MOFs, where previously reported isotherm models reached their limits and either failed to fit the data or could not sufficiently be fitted due to stepped type V isotherms. Moreover, in two instances, models specifically developed for distinct systems are fitted with a higher  value compared to the models in the original reports. Using these fits, it is demonstrated how the new Bingel-Walton isotherm can be used to qualitatively assess the hydrophilic or hydrophobic behavior of porous materials from the relative magnitude of the two fitting parameters. The model can also be employed to find matching heats of adsorption values for systems with isotherm steps using one, continuous fit instead of partial, stepwise fits or interpolation. Additionally, using our single, continuous fit to model stepped isotherms in IAST mixture adsorption predictions leads to good agreement with the results from the osmotic framework adsorbed solution theory that was specifically developed for these systems using a stepwise, approximate fitting, which is yet far more complex. Our new isotherm equation accomplishes all of these tasks with only two fitted parameters, providing a simple, accurate method for modeling a variety of adsorption behavior.

Surprising Use of the Business Innovation Bass Diffusion Model To Accurately Describe Adsorption Isotherm Types I, III, and V.

A proposed low-energy alternative to the separation of alkanes from alkenes by energy-intensive cryogenic distillation is separation by porous adsorbents. Unfortunately, most adsorbents preferentially take up the desired, high-value major component alkene, requiring frequent regeneration. Adsorbents with inverse selectivity for the minor component alkane would enable the direct production of purified, reagent-grade alkene, greatly reducing global energy consumption. However, such materials are exceedingly rare, especially for propane/propylene separation. Here, we report that through adaptive and spontaneous pore size and shape adaptation to optimize an ensemble of weak noncovalent interactions, the structurally responsive metal-organic framework CdIF-13 (-Cd(benzimidazolate)) exhibits inverse selectivity for propane over propylene with record-setting separation performance under industrially relevant temperature, pressure, and mixture conditions. Powder synchrotron X-ray diffraction measurements combined with first-principles calculations yield atomic-scale insight and reveal the induced fit mechanism of adsorbate-specific pore adaptation and ensemble interactions between ligands and adsorbates. Dynamic column breakthrough measurements confirm that CdIF-13 displays selectivity under mixed-component conditions of varying ratios, with a record measured selectivity factor of α ≈ 3 at 95:5 propylene:propane at 298 K and 1 bar. When sequenced with a low-cost rigid adsorbent, we demonstrated the direct purification of propylene under ambient conditions. This combined atomic-level structural characterization and performance testing firmly establishes how cooperatively flexible materials can be capable of unprecedented separation factors.

Adaptive Pore Opening to Form Tailored Adsorption Sites in a Cooperatively Flexible Framework Enables Record Inverse Propane/Propylene Separation.

To move toward more energy-efficient adsorption-based processes, there is a need for accurate multicomponent data under realistic conditions. While the Ideal Adsorbed Solution Theory (IAST) has been established as the preferred prediction method due to its simplicity, limitations and inaccuracies for less ideal adsorption systems have been reported. Here, we use amine-functionalized derivatives of the UiO-66 structure to change the extent of homogeneity of the internal surface toward the adsorption of the two probe molecules carbon dioxide and ethylene. Although it might seem plausible that more functional groups lead to more heterogeneity and, thus, less accurate predictions by IAST, we find a mixed-linker system with increased heterogeneity in terms of added adsorption sites where IAST predictions and experimental loadings agree exceptionally well. We show that incorporating uncertainty analysis into predictions with IAST is important for assessing the accuracy of these predictions. Energetic investigations combined with Grand Canonical Monte Carlo simulations reveal almost homogeneous carbon dioxide but heterogeneous ethylene adsorption in the mixed-linker material, resulting in local, almost pure phases of the individual components.

Article	Year
How Reproducible are Surface Areas Calculated from the BET Equation? Advanced materials (Deerfield Beach, Fla.)\| PubMed ID: 35603497	2022
Surprising Use of the Business Innovation Bass Diffusion Model To Accurately Describe Adsorption Isotherm Types I, III, and V. Langmuir : the ACS journal of surfaces and colloids\| PubMed ID: 36912471	2023
Adaptive Pore Opening to Form Tailored Adsorption Sites in a Cooperatively Flexible Framework Enables Record Inverse Propane/Propylene Separation. Journal of the American Chemical Society\| PubMed ID: 37772785	2023
Does Mixed Linker-Induced Surface Heterogeneity Impact the Accuracy of IAST Predictions in UiO-66-NH? The journal of physical chemistry. C, Nanomaterials and interfaces\| PubMed ID: 37908744	2023

Lukas W. Bingel

Biography

JoVE Journal Publications

Other Publications