S'identifier

Agarose gel electrophoresis is a laboratory technique commonly used to separate DNA fragments by size. However, it can also be used to isolate and purify DNA fragments using a gel extraction protocol.

Gel extraction follows five major steps: running gel electrophoresis to separate fragments, isolating the individual bands, extracting DNA from those bands, and removing the dye and salts from the extracted mixture to obtain pure DNA.

In cloning experiments, both the insert and vector DNA fragments are obtained after digestion with restriction endonucleases. These DNA fragments of varying sizes are mixed with contaminants, such as enzymes, salts, etc., that can inhibit the ligation reaction that follows. Gel extraction is therefore used to obtain pure DNA fragments before ligation.

To set up a gel for extraction, a lower percent (0.7-0.8%) agarose solution is used to ensure efficient migration of the DNA bands. In addition, a wide-combed gel cast is used to obtain thick DNA bands that are easy to isolate. Then, gel electrophoresis is performed at a lower voltage to prevent heating of the gel and damage to the DNA.

Once gel electrophoresis is complete, the ethidium bromide-stained DNA is identified by exposing the gel to long-wavelength UV for a short time. Short exposure to UV radiation prevents damage to DNA. This is followed by cutting out the desired band using a clean razor blade.

The isolated gel slice containing the DNA fragment of interest is then processed through one of the commercially available gel extraction kits. All of these kits follow the same basic principle. First, the agarose gel is dissolved by a buffer solution containing salts, such as sodium iodide. Next, DNA is bound to a column containing an anionic resin and washed a few times with a dilute alcoholic solution to remove impurities. The column is then dried by spinning in a centrifuge. The pure DNA can now be eluted with buffer or deionized water.

Tags

DNA Agarose Gel ElectrophoresisGel ExtractionDNA FragmentsSize SeparationPurificationCloning ExperimentsVector DNAInsert DNARestriction EndonucleasesContaminantsLigation ReactionAgarose SolutionMigration Of DNA BandsWide combed Gel CastLower Voltage ElectrophoresisEthidium Bromide StainingUV ExposureGel Slice Isolation

Du chapitre 15:

article

Now Playing

15.3 : DNA Agarose Gel Electrophoresis

Étudier l'ADN et l'ARN

91.7K Vues

article

15.1 : ADN recombinant

Étudier l'ADN et l'ARN

16.5K Vues

article

15.2 : Isolation de l’ADN

Étudier l'ADN et l'ARN

36.9K Vues

article

15.4 : Sondes pour marquage de l'ADN

Étudier l'ADN et l'ARN

8.0K Vues

article

15.5 : Southern Blot

Étudier l'ADN et l'ARN

17.6K Vues

article

15.6 : micropuces ADN

Étudier l'ADN et l'ARN

16.9K Vues

article

15.7 : ADN complémentaire

Étudier l'ADN et l'ARN

5.5K Vues

article

15.8 : Hybridation in situ en fluorescence (FISH)

Étudier l'ADN et l'ARN

19.0K Vues

article

15.9 : PCR - Réaction en chaîne par polymérase

Étudier l'ADN et l'ARN

80.7K Vues

article

15.10 : RT-PCR en temps réel

Étudier l'ADN et l'ARN

56.0K Vues

article

15.11 : RACE - amplification rapide des extrémités d'ADNc par réaction en chaîne par polymérase

Étudier l'ADN et l'ARN

6.2K Vues

article

15.12 : Séquençage de Sanger

Étudier l'ADN et l'ARN

750.4K Vues

article

15.13 : Séquençage nouvelle génération

Étudier l'ADN et l'ARN

85.6K Vues

article

15.14 : Séquençage de l'ARN

Étudier l'ADN et l'ARN

9.6K Vues

article

15.15 : Annotation et assemblage du génome

Étudier l'ADN et l'ARN

18.6K Vues

See More

JoVE Logo

Confidentialité

Conditions d'utilisation

Politiques

Recherche

Enseignement

À PROPOS DE JoVE

Copyright © 2025 MyJoVE Corporation. Tous droits réservés.