In circuit analysis, situations often arise where resistors are neither in series nor parallel configurations. To tackle such scenarios, three-terminal equivalent networks like the wye (Y) (Figure 1 (a)) or tee (T) and delta (Δ) (Figure 1 (b)) or pi (π) networks come into play. These networks offer versatile solutions and are frequently encountered in various applications, including three-phase electrical systems, electrical filters, and matching networks.

Figure1

The essence of these networks lies in their adaptability. They can be employed individually or integrated into more complex circuits. For instance, when dealing with a delta network but finding it more convenient to work with a wye network, a wye network can be superimposed onto the existing delta configuration. To determine the equivalent resistances within the wye network, ensuring that the resistance between each pair of nodes in the delta network equals the resistance between the same pair of nodes in the Y (or T) network is crucial.

The conversion process between these networks involves mathematical relationships that relate to the resistances. The transformation is facilitated by introducing an extra node 'n' and adhering to the conversion rule: In the Y network, each resistor is the product of the resistors in the two adjacent Δ (delta) branches, divided by the sum of the three Δ resistors. Conversely, to convert a wye network into an equivalent delta network, one can use the following conversion rule: Each resistor in the network is the sum of all possible products of Y resistors taken two at a time, divided by the opposite Y resistor.

These conversion formulas simplify for balanced networks where the resistances in both Y and Δ configurations are equal. This transformation doesn't involve adding or removing components from the circuit but substitutes mathematically equivalent three-terminal network patterns. It effectively transforms a circuit, allowing resistors to be analyzed as if they were either in series or parallel, facilitating the calculation of equivalent resistance if necessary.

Tags
Equivalent ResistanceCircuit AnalysisThree terminal NetworksWye Y NetworkDelta NetworkTee T NetworkElectrical SystemsConversion ProcessResistor TransformationBalanced NetworksMathematical RelationshipsElectrical FiltersMatching Networks

Du chapitre 1:

article

Now Playing

1.12 : Equivalent Resistance

Basics of Electric Circuits

269 Vues

article

1.1 : Charge et courant

Basics of Electric Circuits

1.6K Vues

article

1.2 : Tension

Basics of Electric Circuits

933 Vues

article

1.3 : Puissance et énergie

Basics of Electric Circuits

482 Vues

article

1.4 : Éléments du circuit électrique

Basics of Electric Circuits

439 Vues

article

1.5 : Terminologie du circuit

Basics of Electric Circuits

471 Vues

article

1.6 : Sources indépendantes et dépendantes

Basics of Electric Circuits

769 Vues

article

1.7 : Loi d’Ohm

Basics of Electric Circuits

410 Vues

article

1.8 : Loi actuelle de Kirchhoff

Basics of Electric Circuits

594 Vues

article

1.9 : Loi de tension de Kirchhoff

Basics of Electric Circuits

474 Vues

article

1.10 : Diviseurs de tension

Basics of Electric Circuits

336 Vues

article

1.11 : Diviseurs de courant

Basics of Electric Circuits

209 Vues

article

1.13 : Exemple de conception : Écran tactile résistif

Basics of Electric Circuits

201 Vues

JoVE Logo

Confidentialité

Conditions d'utilisation

Politiques

Recherche

Enseignement

À PROPOS DE JoVE

Copyright © 2025 MyJoVE Corporation. Tous droits réservés.