Direct current (DC) refers to an electric current that flows in a single direction, maintaining a constant polarity. This is in contrast to alternating current (AC), which periodically changes its direction and magnitude. AC forms the backbone of modern electricity transmission and distribution systems due to its efficient long-distance transmission capabilities.

In homes, the power supplies use sinusoidal sources to provide electricity. These sources generate a voltage that varies sinusoidally over time. In other words, the voltage oscillates between a maximum and minimum value in a smooth, wave-like pattern.

Mathematically, this variation is represented by a harmonic function known as a sinusoid. The sinusoid is defined by three primary parameters: its amplitude (the peak value), angular frequency (the rate at which it oscillates), and phase (its position relative to a reference point).

The sinusoidal waveform repeats its pattern every T seconds, where T is referred to as the period of the function. The period is inversely related to the angular frequency, representing the duration of one complete cycle of the waveform.

On the other hand, the sinusoid frequency is defined as the number of cycles that occur per second. It is the reciprocal of the period and is typically measured in Hertz (Hz).

To understand the concept of phase, consider two sinusoids with the same frequency. If one sinusoid reaches its maxima and minima earlier than the other, then the first sinusoid is said to "lead" the second. In this case, the two sinusoids are out of phase, and the shift between them is known as the phase difference.

On the contrary, if the two sinusoids reach their maxima and minima simultaneously, they are considered to be in phase. This means they have a phase difference of zero.

Understanding these fundamental concepts related to AC is crucial for various applications, from designing electronic circuits to analyzing power systems. The principles of AC underpin many technologies in our daily lives, including household appliances, telecommunications systems, and power generation facilities.

Tags
DCACSinusoidal SourcesElectric CurrentVoltage OscillationHarmonic FunctionAmplitudeAngular FrequencyPhaseSinusoidal WaveformPeriodFrequencyPhase DifferenceElectronic CircuitsPower Systems

Du chapitre 6:

article

Now Playing

6.1 : Sinusoidal Sources

AC Circuit Analysis

249 Vues

article

6.2 : Représentation graphique et analytique des sinusoïdes

AC Circuit Analysis

277 Vues

article

6.3 : Phaseurs

AC Circuit Analysis

320 Vues

article

6.4 : Arithmétique du phaseur

AC Circuit Analysis

122 Vues

article

6.5 : Relations de phaseur pour les éléments de circuit

AC Circuit Analysis

329 Vues

article

6.6 : Lois de Kirchoff à l’aide de phaseurs

AC Circuit Analysis

220 Vues

article

6.7 : Impédances et admission

AC Circuit Analysis

394 Vues

article

6.8 : Combinaison d’impédance

AC Circuit Analysis

191 Vues

article

6.9 : Analyse de nœuds pour les circuits AC

AC Circuit Analysis

188 Vues

article

6.10 : Analyse de maillage pour les circuits AC

AC Circuit Analysis

237 Vues

article

6.11 : Transformation de source pour les circuits AC

AC Circuit Analysis

330 Vues

article

6.12 : Circuits Thévenin équivalents

AC Circuit Analysis

117 Vues

article

6.13 : Circuits équivalents Norton

AC Circuit Analysis

221 Vues

article

6.14 : Théorème de superposition pour les circuits AC

AC Circuit Analysis

454 Vues

article

6.15 : Circuits AC d’amplis opérationnels

AC Circuit Analysis

101 Vues

See More

JoVE Logo

Confidentialité

Conditions d'utilisation

Politiques

Recherche

Enseignement

À PROPOS DE JoVE

Copyright © 2025 MyJoVE Corporation. Tous droits réservés.