Bipolar Junction Transistors (BJTs) are pivotal components in amplifier circuits, functioning as voltage-controlled current sources in their active region. This characteristic allows them to efficiently control the collector current through variations in the base-emitter voltage. Essentially, BJTs amplify power due to their ability to take a weak input signal and output a much stronger signal.

In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role extends to converting transconductance into voltage amplification. This conversion is achieved by channeling the output current through a resistor. The output voltage of the amplifier is determined by the voltage drop across this load resistor subtracted from the supply voltage. Consequently, the amplifier produces an inverted output voltage, which is essentially the input voltage shifted by the supply voltage. This inversion is a hallmark of common-emitter amplifiers.

The voltage-transfer characteristic curve of a common-emitter BJT amplifier provides a visual representation of how the output collector voltage varies in response to changes in the input base voltage. Notably, the curve's steep slope in the active region indicates where maximum gain is achieved. However, this region also introduces some nonlinearity to the output voltage.

A base-emitter DC voltage bias is set at the quiescent point (Q-point) within the active region for stable and linear amplification. When a small, time-varying signal is applied on top of this DC bias, the BJT operates within a small, nearly linear segment of the characteristic curve. This results in the amplification of the output collector voltage. Such a configuration is crucial for achieving the desired amplification while maintaining the integrity of the signal's waveform.

BJTs are fundamental building blocks for various electronic applications, particularly in creating efficient and effective amplifier circuits that enhance signal strength without significant distortion.

Tags
Bipolar Junction TransistorsBJT AmplifiersCommon emitter ConfigurationVoltage controlled Current SourceVoltage AmplificationTransconductanceVoltage transfer Characteristic CurveQuiescent PointSignal Amplification

Du chapitre 12:

article

Now Playing

12.9 : BJT Amplifiers

Transistors

173 Vues

article

12.1 : Transistor à jonction bipolaire

Transistors

264 Vues

article

12.2 : Configurations de BJT

Transistors

187 Vues

article

12.3 : Principe de fonctionnement du BJT

Transistors

147 Vues

article

12.4 : Caractéristiques du BJT

Transistors

449 Vues

article

12.5 : Modes de fonctionnement du BJT

Transistors

636 Vues

article

12.6 : Réponse en fréquence du BJT

Transistors

428 Vues

article

12.7 : Fréquence de coupure du BJT

Transistors

376 Vues

article

12.8 : Commutation du BJT

Transistors

251 Vues

article

12.10 : Analyse de petits signaux d’amplificateurs BJT

Transistors

594 Vues

article

12.11 : Transistor à effet de champ

Transistors

130 Vues

article

12.12 : Caractéristiques du JFET

Transistors

168 Vues

article

12.13 : Biais du FET

Transistors

116 Vues

article

12.14 : Condensateur MOS

Transistors

464 Vues

article

12.15 : MOSFET

Transistors

226 Vues

See More

JoVE Logo

Confidentialité

Conditions d'utilisation

Politiques

Recherche

Enseignement

À PROPOS DE JoVE

Copyright © 2025 MyJoVE Corporation. Tous droits réservés.