eoe sub articles

EoE Sub Articles

1. Detection of ROS burst in Arabidopsis leaf discs following immune elicitation
<ol>
	<li>Plant growth and maintenance.
	<ol>
		<li>To synchronize germination, stratify Arabidopsis seeds by suspending approximately 50 seeds in 1 mL of sterile 0.1% agar [w/v] and store at 4 &#176;C (no light) for 3-4 days. 
		NOTE: Stratify a wild-type background control (for example, Col-0) and genotypes with high and low immune outputs (for example, cpk28-1 and bak1-5, respectively) to serve as internal controls.</li>
		<li>Sow seeds on the soil and germinate under standard short-day conditions (22 &#176;C, 10 h light, 150 &#956;E/m2/s light intensity, and 65-70% relative humidity).</li>
		<li>After approximately 7 days, use forceps to transplant individual seedlings to new pots, separated by at least 4 cm to permit full rosette development. Transplant 6-12 seedlings per genotype and return to standard short-day conditions. Regularly water and fertilize plants (1 g/L of 20-20-20 fertilizer every 2 weeks).</li>
	</ol>
	</li>
	<li>Collect leaf discs in 96-well plates for overnight recovery.
	<ol>
		<li>At 4-5 weeks post-germination (Figure 1A), use a sharp 4 mm biopsy punch to remove one leaf disc per plant, avoiding the mid-vein and being careful to limit wounding (Figure 1B). Place leaf discs in an unused 96-well luminometer plate containing 100 &#956;L of double distilled water (ddH2O) with the adaxial side facing upwards to prevent desiccation (Figure 1C). If assessing multiple elicitors, remove 1 leaf disc from the same leaf for each elicitor treatment. 
		NOTE: Sample leaves that are fully expanded, third to fifth from the top of the rosette, and approximately the same size and age to limit variability. If possible, cut leaf discs in half using a razor blade prior to overnight recovery, as this increases the surface area exposed to elicitor solution.</li>
		<li>Recover overnight at room temperature to prevent the interference of ROS produced by wounding during leaf disc collection. Cover plates with a lid to prevent evaporation.</li>
	</ol>
	</li>
	<li>Perform the elicitor treatment and measure ROS production.
	<ol>
		<li>Program the plate reader prior to adding the reaction solution, as this will reduce the time between ROS burst initiation and the first measurements recorded. Use a commercial software that is appropriate for the plate reader. In our case (see Table of Contents), click Settings, and select the LUM96 Cartridge and the Kinetic Read Type. Click the Read Area category and drag to select a subset of wells or the entire plate to be read. Under the PMT and Optics tab, set the integration time to 1,000 ms. Under the Timing tab, set the Total Run Time to 40-60 min and the Interval to 2 min.</li>
		<li>Remove water from each well using a multi-channel pipette. 
		NOTE: Do not puncture leaf discs, as this may cause wounding stress and result in more variable ROS outputs.</li>
		<li>Prepare a reaction solution containing 100 &#956;M luminol, 10 &#956;g/mL horseradish peroxidase (HRP), and the desired concentration of elicitor (for example: elf18 at 1 nM, 10 nM, 100 nM, or 1,000 nM) in sterile ddH2O using 10 mL of solution for one 96-well plate. 
		NOTE: Dissolve lyophilized peptides in sterile H2O in low-binding tubes to make a 10 mM stock, flash-freeze in liquid N2, and store at -80 &#176;C. When ready to use, dilute stocks in sterile H2O to generate a 100 &#956;M working stock and store at -20 &#176;C.</li>
		<li>Use a multi-channel pipette to dispense 100 &#956;L of the reaction mixture to each well, adding the solution to all leaf discs of the same treatment at the same time. Include a control reaction (no elicitor) for each genotype to assess basal ROS levels in the absence of elicitation. Immediately measure light emission for all wavelengths in the visible spectrum using a microplate reader. 
		NOTE: Prepare and apply the reaction solution under low light, as luminol and HRP are light-sensitive reagents. Keep reagents on ice or at -20&#176;C unless in use.</li>
		<li>Measure light emission with a 1,000 ms integration time in 2 min intervals over a 40-60 min period in a microplate reader in order to capture the dynamic oxidative burst (Figure 1D). 
		NOTE: Use a longer integration time to improve assay sensitivity, while ensuring that all samples in a 96-well plate can be measured within one interval.</li>
	</ol>
	</li>
</ol>

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>20-20-20 Fertilizer</td>
			<td>Plant Prod</td>
			<td>10529</td>
			<td>Mix 1g/L in water and apply to plants every 2 weeks for optimal growth.</td>
		</tr>
		<tr>
			<td>4 mm Biopsy Punch</td>
			<td>Medical Mart</td>
			<td>232-33-34-P</td>
			<td>A cork borer set with a 0.125 cm^2 surface area can also be used.</td>
		</tr>
		<tr>
			<td>BioHit mLine Mechanical 12 Multichannel Pipette (30-300 uL)</td>
			<td>Sartorius</td>
			<td>725240</td>
			<td>Any multichannel pipette can be used, as can a single pipetter if necessary.</td>
		</tr>
		<tr>
			<td>elf18 (Ac-SKEKFERTKPHVNVGTIG)</td>
			<td>EZ Biolab</td>
			<td>cp7211</td>
			<td>Store 10 mM stock peptide at -80C in low protein binding tubes. When thawed, store 100 uM working stock at -20C.</td>
		</tr>
		<tr>
			<td>Forceps</td>
			<td>Fisher Scientific</td>
			<td>22-327379</td>
			<td></td>
		</tr>
		<tr>
			<td>Horseradish Peroxidase</td>
			<td>Sigma-Aldrich</td>
			<td>P6782</td>
			<td>Dissolve in pure water. Store at -20C and away from light.</td>
		</tr>
		<tr>
			<td>Luminol</td>
			<td>Sigma-Aldrich</td>
			<td>A8511</td>
			<td>Dissolve in DMSO. Store at -20C and away from light.</td>
		</tr>
		<tr>
			<td>Murisage and Skoog Basal Salts</td>
			<td>Cedarlane Labs</td>
			<td>MSP09-100LT</td>
			<td>Store at 4C.</td>
		</tr>
		<tr>
			<td>Soil</td>
			<td>SunGrow Horticulture</td>
			<td>Sunshine Mix #1</td>
			<td>Other soil types can also be used to grow Arabidopsis. Mix with water when filling pots.</td>
		</tr>
		<tr>
			<td>SpectraMax Paradigm Multi Mode Microplate Reader with LUM Module</td>
			<td>Molecular Devices</td>
			<td></td>
			<td>Any plate reader capable of detecting luminescence can be used for these assays.</td>
		</tr>
		<tr>
			<td>White Polystyrene 96-Well Plates</td>
			<td>Fisher Scientific</td>
			<td>07-200-589</td>
			<td></td>
		</tr>
	</tbody>
</table>

an assay to detect oxidative burst in arabidopsis leaf discs upon immune elicitation

Source: Bredow, M., et al. <a href="https://app.jove.com/v/59437">Pattern-Triggered Oxidative Burst and Seedling Growth Inhibition Assays in Arabidopsis thaliana.</a> J. Vis. Exp. (2019)
This video demonstrates an assay to measure oxidative burst in Arabidopsis leaves upon immune elicitation. Leaf discs, cut from plant leaves, are incubated with bacterial peptides functioning as microbe-associated molecular patterns or MAMPs. Upon detection of the MAMPs, plant cells induce the production of extracellular ROS, which is detected using a chemiluminescence assay.

<img alt="Figure 1" src="/files/ftp_upload/21909/21909_Figure1.jpg" /> 
Figure 1. Luminol-based oxidative burst assay following immune induction in Arabidopsis. (A) Grow plants on soil in short-day conditions for 4-5 weeks. (B) Use a 4 mm biopsy punch to collect leaf discs from each plant and recover overnight in ddH2O. (C) Add reaction solution (100 &#956;M luminol, 10 &#956;g/mL HRP, and the desired concentration of elicitor) and measure light emission ove...

An Assay to Detect Oxidative Burst in Arabidopsis Leaf Discs upon Immune Elicitation

1. Detection of ROS burst in Arabidopsis leaf discs following immune elicitation

	Plant growth and maintenance.
	
		To synchronize germination, stratify ...

Obtain Arabidopsis thaliana leaf discs. Immerse them in microplate wells containing double-distilled water to prevent desiccation.
Incubate the discs to allow recovery from wounding.
Post-incubation, remove the water. Add a reaction mixture containing peptides derived from bacteria, horseradish peroxidase enzyme, and luminol.
Using a microplate reader, measure the luminescence over time.
Pattern recognition receptors, or PRRs, on the plant cells, bind the bacterial peptides, which are microbe-associated molecular patterns.
Further, the PRR associates with its co-receptor, undergoing mutual phosphorylation, activating receptor-like protein kinases, and causing intracellular calcium influx.
This, in turn, activates the transmembrane respiratory burst oxidase homolog, or RBOH proteins.
Activated RBOH catalyzes the production of extracellular reactive oxygen species, or ROS, causing an oxidative burst. Further, ROS gets converted into hydrogen peroxide.
Horseradish peroxidase utilizes hydrogen peroxide to oxidize luminol into an excited state, emitting luminescence upon returning to the ground state.
Measure the luminescence to monitor the rapid oxidative burst following microbial pattern recognition.

an-assay-to-detect-oxidative-burst-arabidopsis-leaf-discs-upon-immune

Research

JoVE Encyclopedia of Experiments

Immunology

Immunodiagnostics

Specialized Assays

251 vues. Source : Bredow, M., et al. Essais d’explosion oxydative déclenchée par motif et d’inhibition de la croissance des plantules chez Arabidopsis thaliana. J. Vis. Exp. (2019) Cette vidéo montre un test permettant de mesurer l’explosion oxydative dans les feuilles d’Arabidopsis lors de l’élicitation immunitaire. Les disques de feuilles, coupés dans les feuilles des plantes, sont incubés avec des peptides bactériens fonctionnant comme des motifs moléculaires associés aux microbes ...

Vidéo: Un test pour détecter l’explosion oxydative dans les disques de feuilles d’Arabidopsis lors de l’élicitation immunitaire - Concept

Adherence of Bacteria to Plant Surfaces Measured in the Laboratory

This manuscript describes a method to measure bacterial binding to axenic plant surfaces in the light microscope and through the use of viable cell counts. Plant materials used include roots, sprouts, leaves, and cut fruits. The methods described are inexpensive, easy, and suitable for small sample sizes. Binding is measured in the laboratory and a variety of incubation media and conditions can be used. The effect of inhibitors can be determined. Situations that promote and inhibit binding can also be assessed. In some cases it is possible to distinguish whether various conditions alter binding primarily due to their effects on the plant or on the bacteria.

An easy method for measuring and characterizing bacterial adhesion to plants, particularly roots and sprouts, is described in this article.

Adhérence des bactéries à planter des Surfaces mesurées en laboratoire

This manuscript describes a method to measure bacterial binding to axenic plant surfaces in the light microscope and through the use of viable cell ...

Recherche

JoVE Journal

Environnement

Catalytic Scavenging of Plant Reactive Oxygen Species In Vivo by Anionic Cerium Oxide Nanoparticles

Reactive oxygen species (ROS) accumulation is a hallmark of plant abiotic stress response. ROS play&#160;a dual role in plants by acting as signaling molecules at low levels and damaging molecules at high levels. Accumulation of ROS in stressed plants can damage metabolites, enzymes, lipids, and DNA, causing a reduction of plant growth and yield. The ability of cerium oxide nanoparticles (nanoceria) to catalytically scavenge ROS in vivo provides a unique tool to understand and bioengineer plant abiotic stress tolerance. Here, we present a protocol to synthesize and characterize poly (acrylic) acid coated nanoceria (PNC), interface the nanoparticles with plants via leaf lamina infiltration, and monitor their distribution and ROS scavenging in vivo using confocal microscopy. Current molecular tools for manipulating ROS accumulation in plants are limited to model species and require laborious transformation methods. This protocol for in vivo ROS scavenging has the potential to be applied to wild type plants with broad leaves and leaf structure like Arabidopsis thaliana.

Catalytic Scavenging of Plant Reactive Oxygen Species In Vivo by Anionic Cerium Oxide Nanoparticles

Here, we present a protocol for the synthesis and characterization of cerium oxide nanoparticles (nanoceria) for ROS (reactive oxygen species) scavenging in vivo, nanoceria imaging in plant tissues by confocal microscopy, and in vivo monitoring of nanoceria ROS scavenging by confocal microscopy.

Nettoyage catalytique de plante oxygénées espèces In Vivo par des nanoparticules d’oxyde de cérium anioniques

Reactive oxygen species (ROS) accumulation is a hallmark of plant abiotic stress response. ROS play&#160;a dual role in plants by acting as signaling ...

Bio-ingénierie

Real-Time Detection of Reactive Oxygen Species Production in Immune Response in Rice with a Chemiluminescence Assay

Reactive oxygen species (ROS) play vital roles in a variety of biological processes, including the sensing of abiotic and biotic stresses. Upon pathogen infection or challenge with pathogen-associated chemicals (pathogen-associated molecular patterns [PAMPs]), an array of immune responses, including a ROS burst, are quickly induced in plants, which is called PAMP-triggered immunity (PTI). A ROS burst is a hallmark PTI response, which is catalyzed by a group of plasma membrane-localized NADPH oxidases-the RBOH family proteins. The vast majority of ROS comprise hydrogen peroxide (H2O2), which can be easily and steadily detected by a luminol-based chemiluminescence method. Chemiluminescence is a photon-producing reaction in which luminol, or its derivative (such as L-012), undergoes a redox reaction with ROS under the action of a catalyst. This paper describes an optimized L-012-based chemiluminescence method to detect apoplast ROS production in real-time upon PAMP elicitation in rice tissues. The method is easy, steady, standardized, and highly reproducible under firmly controlled conditions.

Here, we describe a method for the real-time detection of apoplastic reactive oxygen species (ROS) production in rice tissues in pathogen-associated molecular pattern-triggered immune response. This method is simple, standardized, and generates highly reproducible results under controlled conditions.

Détection en temps réel de la production d’espèces réactives de l’oxygène dans la réponse immunitaire dans le riz avec un test de chimiluminescence

Reactive oxygen species (ROS) play vital roles in a variety of biological processes, including the sensing of abiotic and biotic stresses. Upon pathogen ...

An Assay to Detect Oxidative Burst in Arabidopsis Leaf Discs upon Immune Elicitation

Transcription

An Assay to Detect Oxidative Burst in Arabidopsis Leaf Discs upon Immune Elicitation