This work was funded by the Science and Technology Facilities Council (STFC).

<ol>
	<li>Cohadon, P. F., Heidmann, A., Pinard, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cooling+of+a+Mirror+by+Radiation+Pressure.">Cooling of a Mirror by Radiation Pressure.</a> Physical Review Letters. 83, 3174-3177 (1999).</li><li>Corbitt, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+All-Optical+Trap+for+a+Gram-Scale+Mirror.">An All-Optical Trap for a Gram-Scale Mirror.</a> Physical Review Letters. 98, 150802 (2007).</li><li>M&#252;ller-Ebhardt, H., Rehbein, H., Schnabel, R., Danzmann, K., Chen, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Entanglement+of+Macroscopic+Test+Masses+and+the+Standard+Quantum+Limit+in+Laser+Interferometry.">Entanglement of Macroscopic Test Masses and the Standard Quantum Limit in Laser Interferometry.</a> Physical Review Letters. 100, 013601 (2008).</li><li>Kimble, H. J., Levin, Y., Matsko, A. B., Thorne, K. S., Vyatchanin, S. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conversion+of+conventional+gravitational-wave+interferometers+into+quantum+nondemolition+interferometers+by+modifying+their+input+and+output+optics.">Conversion of conventional gravitational-wave interferometers into quantum nondemolition interferometers by modifying their input and output optics.</a> Physical Review D. 65, 022002 (2001).</li><li>Numata, K., Kemery, A., Camp, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal-Noise+Limit+in+the+Frequency+Stabilization+of+Lasers+with+Rigid+Cavities.">Thermal-Noise Limit in the Frequency Stabilization of Lasers with Rigid Cavities.</a> Physical Review Letters. 93, 250602 (2004).</li><li>Aufmuth, K., Danzmann, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gravitational+wave+detectors.">Gravitational wave detectors.</a> New Journal of Physics. 7, 202 (2005).</li><li>Harry, G. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal+noise+in+interferometric+gravitational+wave+detectors+due+to+dielectric+optical+coatings.">Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings.</a> Classical and Quantum Gravity. 19, 897-917 (2002).</li><li>Crooks, D. R. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Excess+mechanical+loss+associated+with+dielectric+mirror+coatings+on+test+masses+in+interferometric+gravitational+wave+detectors.">Excess mechanical loss associated with dielectric mirror coatings on test masses in interferometric gravitational wave detectors.</a> Classical and Quantum Gravity. 19, 883-896 (2002).</li><li>Yu, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Internal+thermal+noise+in+the+LIGO+test+masses:+A+direct+approach.">Internal thermal noise in the LIGO test masses: A direct approach.</a> Physical Review D. 57, 659-663 (1998).</li><li>Harry, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=the+LIGO+Collaboration.+Advanced+LIGO:+the+next+generation+of+gravitational+wave+detectors.">the LIGO Collaboration. Advanced LIGO: the next generation of gravitational wave detectors.</a> Classical and Quantum Gravity. 27, 084006 (2010).</li><li>Accadia, T., Acernese, F., Antonucci, F., Astone, P., Ballardin, G., Barone, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Status+of+the+VIRGO+project.">Status of the VIRGO project.</a> Classical and Quantum Gravity. 28, 114002 (2011).</li><li>Sathyaprakash, B., Abernathy, M., Acernese, F., Ajith, P., Allen, B., Amaro-Seoane, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scientific+objectives+of+Einstein+Telescope.">Scientific objectives of Einstein Telescope.</a> Classical and Quantum Gravity. 29 (12), 124013 (2012).</li><li>Bondarescu, M., Thorne, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+family+of+light+beams+and+mirror+shapes+for+future+LIGO+interferometers.">New family of light beams and mirror shapes for future LIGO interferometers.</a> Physical Review D. 74, 082003 (2006).</li><li>Bondarescu, M., Kogan, O., Chen, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimal+light+beams+and+mirror+shapes+for+future+LIGO+interferometers.">Optimal light beams and mirror shapes for future LIGO interferometers.</a> Physical Review D. 78, 082002 (2008).</li><li>Tournefier Mours, E., Vinet, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal+noise+reduction+in+interferometric+gravitational+wave+antennas:+using+high+order+TEM+modes.">Thermal noise reduction in interferometric gravitational wave antennas: using high order TEM modes.</a> Classical and Quantum Gravity. 23, 5777 (2006).</li><li>Chelkowski, S., Hild, S., Freise, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prospects+of+higher-order+Laguerre-Gauss+modes+in+future+gravitational+wave+detectors.">Prospects of higher-order Laguerre-Gauss modes in future gravitational wave detectors.</a> Physical Review D. 79, 122002 (2009).</li><li>Vinet, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reducing+thermal+effects+in+mirrors+of+advanced+gravitational+wave+interferometric+detectors.">Reducing thermal effects in mirrors of advanced gravitational wave interferometric detectors.</a> Classical and Quantum Gravity. 24, 3897 (2007).</li><li>Fulda, P., Kokeyama, K., Chelkowski, S., Freise, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+demonstration+of+higher-order+Laguerre-Gauss+mode+interferometry.">Experimental demonstration of higher-order Laguerre-Gauss mode interferometry.</a> Physical Review D. 82, 012002 (2010).</li><li>Bond, C., Fulda, P., Carbone, L., Kokeyama, K., Freise, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Higher+order+Laguerre-Gauss+mode+degeneracy+in+realistic,+high+finesse+cavities.">Higher order Laguerre-Gauss mode degeneracy in realistic, high finesse cavities.</a> Physical Review D. 84, 102002 (2011).</li><li>Sorazu, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+test+of+higher-order+Laguerre-Gauss+modes+in+the+10+m+Glasgow+prototype+interferometer.">Experimental test of higher-order Laguerre-Gauss modes in the 10 m Glasgow prototype interferometer.</a> Class. Quantum Grav. 30, 035004 (2013).</li><li>Carbone, L., Bogan, C., Fulda, P., Freise, A., Willke, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+High-Purity+Higher-Order+Laguerre-Gauss+Beams+at+High+Laser+Power.">Generation of High-Purity Higher-Order Laguerre-Gauss Beams at High Laser Power.</a> Physical Review Letters. 110, 251101 (2013).</li><li>Fulda, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phaseplate+design+for+Laguerre-Gauss+mode+conversion.">Phaseplate design for Laguerre-Gauss mode conversion.</a> , (2013).</li><li>Willke, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stabilized+lasers+for+advanced+gravitational+wave+detectors.">Stabilized lasers for advanced gravitational wave detectors.</a> Laser &amp; Photonics Rev. , 1-15 (2010).</li><li>Granata, M., Buy, C., Ward, R., Barsuglia, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Higher-Order+Laguerre-Gauss+Mode+Generation+and+Interferometry+for+Gravitational+Wave+Detectors.">Higher-Order Laguerre-Gauss Mode Generation and Interferometry for Gravitational Wave Detectors.</a> Physical Review Letters. 105, 231102 (2010).</li><li>Matsumoto, N., Ando, T., Inoue, T., Ohtake, Y., Fukuchi, N., Hara, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+high-quality+higher-order+Laguerre+Gaussian+beams+using+liquid-crystal-on-silicon+spatial+light+modulators.">Generation of high-quality higher-order Laguerre Gaussian beams using liquid-crystal-on-silicon spatial light modulators.</a> J. Opt. Soc. Am. 25, 1642-1651 (2008).</li><li>Kennedy, S. A., Szabo, M. J., Teslow, H., Porterfield, J. Z., Abraham, E. R. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Creation+of+Laguerre-Gaussian+laser+modes+using+diffractive+optics.">Creation of Laguerre-Gaussian laser modes using diffractive optics.</a> Physical Review A. 66, 043801 (2002).</li><li>Black, E. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+introduction+to+Pound-Drever-Hall+laser+frequency+stabilization.">An introduction to Pound-Drever-Hall laser frequency stabilization.</a> American Journal of Physics. 69, 79-87 (2001).</li><li>Freise, A., Heinzel, G., Lueck, H., Schilling, R., Willke, B., Danzmann, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Frequency-domain+interferometer+simulation+with+higher-order+spatial.">Frequency-domain interferometer simulation with higher-order spatial.</a> Class.Quant.Grav. 21, (2004).</li><li>Uehara, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mode+cleaner+for+the+Initial+LIGO+10+Watt+Laser.">Mode cleaner for the Initial LIGO 10 Watt Laser.</a> LIGO internal report. 12, (1997).</li></ol>

Authors have nothing to disclose.

The output beams of most lasers used in high-precision measurements are designed to have a shape well described as a fundamental Gaussian mode. This particular beam geometry combines low diffraction with a spherical wave front. While the low diffraction is one of the key advantages of laser light, the spherical wave front is equally important, as it allows the low-loss transformation of the laser beam by standard optical components with spherical surfaces. Different beam shapes can be created as well, and recently Laguerre-Gauss beams have become of interest for their potential application in high-precision interferometry.
In this paper we demonstrated the experimental procedure to create higher-order Laguerre-Gauss modes with 95% purity for high-power, ultra stable laser beams. To achieve this, we have combined standard techniques from different aspects of optical research, namely diffractive phase plates and laser pre-stabilization to mode cleaner cavities. Our experiment provides a simple, modular and very reliable method to create high power beams in user defined higher-order modes. A commercial ultra-stable laser is used as the light source. Its output is injected to a diffractive phase plate, which can convert up to 75% of the light into the desired Laguerre-Gauss mode. This light is then injected to a small optical cavity and an electronic feedback loop is used to stabilize the laser frequency of the laser to the cavity length. The beam transmitted by the cavity is to 95% in the desired mode and, like the fundamental mode beam at the origin of the setup, has very good frequency stability at audio frequencies. All the parts represent standard components in modern optical experiments. We have successfully demonstrated this technique for laser powers up to 80 W pure Laguerre-Gauss 33 mode.
It could be possible to achieve similar results by replacing the phase plate with another mode-converting element (for example, other diffractive elements or astigmatic mode converters). Alternatively a laser could be setup with an optical resonator tuned for the desired Laguerre-Gauss modes, using for example, an amplitude mask. Finally the laser frequency stabilization to the reference optical cavity could be exchanged with a similar scheme that uses an atomic reference. The need for an electronic feedback system is probably the main disadvantage, but this is inevitable for any light source used for precision interferometer.
However, we believe that the method demonstrated in this paper provides a simple and modular scheme which can be scaled to all ranges of required laser frequency, power, or shape and thus presents a powerful and versatile method. Each part, the laser source, the diffractive element, as well as the optical cavity can be changed or optimized individually, which means that also existing laser injection systems can be upgraded to use Laguerre-Gauss modes.

Au cours des dernières décennies des expériences de haute précision interférométriques ont été poussés vers un régime de sensibilité ultime où les effets quantiques commencent à jouer un rôle décisif. Dans ces expériences en cours et futurs, tels que le refroidissement laser des oscillateurs mécaniques 1, pièges optiques pour miroirs 2, la production de masses de test intriqués 3, quantique non-démolition interférométrie 4, la stabilisation de la fréquence des lasers à cavités rigides 5, et la détection d&#39;ondes gravitationnelles 6 , 7, 8, les chercheurs sont confrontés à une multitude de limiter les sources de bruit fondamentale et technique. Un des problèmes les plus graves est le bruit thermique des miroirs de la cavité des configurations interférométriques, qui est causée par l&#39;excitation thermique des atomes qui composent les substrats de miroir et le miroir des revêtements réfléchissants 7, 8, 9. Cet effet, appelé aussi le mouvement brownien, va provoquer une incertitude dans la phase dela lumière réfléchie à partir des masses d&#39;épreuve et va donc se manifester par une limitation fondamentale de bruit en sortie de l&#39;interféromètre. Par exemple, la sensibilité de conception projetée avancé ondes gravitationnelles antennes, comme avancée LIGO, Advanced VIRGO, et le télescope Einstein, est limitée par ce type de bruit dans la région la plus sensible de la bande de fréquence d&#39;observation de 10, 11, 12. Physiciens expérimentateurs de la communauté travaillent dur dans un effort continu pour minimiser ces contributions de bruit et d&#39;améliorer la sensibilité de leurs instruments. Dans le cas particulier de miroir brownien bruit, une méthode pour l&#39;atténuation consiste à utiliser un faisceau plus grande taille de la tache de la norme fondamentale HG 00 faisceau actuellement utilisé sur les surfaces de masse d&#39;essai, puisqu&#39;une plus grande moyenne de faisceau plus efficacement sur ​​les mouvements aléatoires de la surface 13, 14. La densité spectrale de puissance du bruit thermique du miroir a été représentée à l&#39;échelle avecl&#39;inverse de la taille du faisceau gaussien pour le substrat de miroir et avec l&#39;inverse du carré de la surface du miroir 9. Toutefois, comme les taches de faisceau sont faits plus grande, une plus grande fraction de la puissance lumineuse est perdu sur le bord de la surface réfléchissante. Si l&#39;on utilise un faisceau avec une répartition d&#39;intensité radiale plus homogène que le HG 00 faisceau couramment utilisé (voir par exemple la figure 1), le niveau de bruit thermique brownien peut être réduite sans augmentation de ce type de perte. Parmi tous les types de faisceau plus homogènes qui ont été proposées pour les nouvelles versions de l&#39;interférométrie de haute précision, par exemple poutres Mesa ou modes coniques 13, 14, les plus prometteurs sont d&#39;ordre supérieur LG poutres en raison de leur compatibilité potentielle avec le sphérique actuellement utilisé surfaces de miroir 15. Par exemple, le taux de détection des étoiles à neutrons binaire dans les systèmes de spirale - qui sont considérés comme des sources astrophysiques les plus prometteurs pour une première GW détecterion - pourrait être améliorée d&#39;un facteur de 2 ou plus de 16 ans au prix d&#39;un minimum de modifications dans la conception des interféromètres de deuxième génération actuellement en construction 10, 11. En plus des avantages de bruit thermique, les distributions d&#39;intensité plus larges d&#39;ordre supérieur poutres LG (voir par exemple la figure 2) ont été montré pour réduire l&#39;ampleur des aberrations thermiques de l&#39;optique dans les interféromètres. Cela permettrait de réduire la mesure dans laquelle les systèmes de compensation thermique sont invoquées dans de futures expériences d&#39;atteindre des sensibilités de conception 19. Nous avons étudié et démontré avec succès la faisabilité de générer des faisceaux LG aux niveaux de pureté et la stabilité requises pour opérer avec succès interféromètres GW au meilleur de leur sensibilité 16, 18, ​​19, 20, 21, 22. La méthode proposée combine les techniques et l&#39;expertise développées dans divers domaines de la physique et de l&#39;optique succèsh comme la génération d&#39;une grande stabilité, un faible bruit laser monomode poutres 23, l&#39;utilisation de modulateurs spatiaux de lumière et des éléments optiques de diffraction pour la manipulation des profils spatiaux des faisceaux lumineux 18, 22, 24, 25, 26, et l&#39;utilisation de des techniques de pointe pour la détection, le contrôle et la stabilisation des cavités optiques résonnantes 27 destinées à une autre purification et la stabilisation de la lumière laser. Cette méthode a fait ses preuves dans les expériences de laboratoire, a exporté pour des tests dans des interféromètres de prototype à grande échelle 20, et pour générer des modes LG aux puissances laser élevées jusqu&#39;à 80 W 21. Dans cet article, nous présentons les détails de la méthode de génération d&#39;ordre supérieur poutres LG et de discuter d&#39;une méthodologie pour la caractérisation et la validation du faisceau résultant. En outre, à l&#39;étape 4 une méthode pour les enquêtes numériques des cavités avec des miroirs non-parfaits 19 est décrite.

<table border="1">
	<tbody>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>The experimental apparatus discussed in this paper requires the following types of instruments:</td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>Instrument</td>
		</tr>
		<tr>
			<td>Solid state Laser source, Nd:YAG 1064 nm CW laser</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Faraday Isolator</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Electro-Optic Modulator (EOM)</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>CCDcamera beam profiler</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Lenses</td>
			<td></td>
			<td></td>
			<td>Quantity: depending on apparatus design</td>
		</tr>
		<tr>
			<td>Steering Mirrors</td>
			<td></td>
			<td></td>
			<td>Quantity: depending on apparatus design</td>
		</tr>
		<tr>
			<td>Aperture</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>High reflectivity mirrors (for normal incidence)</td>
			<td></td>
			<td></td>
			<td>Quantity: 2</td>
		</tr>
		<tr>
			<td>Piezoelectric ring</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Cavity spacer</td>
			<td></td>
			<td></td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Photodiodes and related control electronics</td>
			<td></td>
			<td></td>
			<td>Quantity: 1 or more, depending on apparatus design</td>
		</tr>
		<tr>
			<td>Spatial light modulator</td>
			<td></td>
			<td></td>
			<td>Quantity: 1 
			Holoeye LCR-2500</td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>All the above instruments are commercially available and no particular specification is required. We leave the choice of the most suitable instruments to the experimenter's discretion.</td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>For the interest of the experimenter interested in reproducing the protocol, we recommend the following tools used in our experiment:</td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>Tools</td>
		</tr>
		<tr>
			<td>Innolight OEM 300NE, 1064 nm, 300 mW</td>
			<td></td>
			<td></td>
			<td>Laser Source:</td>
		</tr>
		<tr>
			<td>SIMTOOLs</td>
			<td></td>
			<td></td>
			<td>Software for data analysis, available at <a href="http://www.gwoptics.org/simtools/" target="_blank">www.gwoptics.org/simtools/</a></td>
		</tr>
		<tr>
			<td>FINESSE</td>
			<td></td>
			<td></td>
			<td>Software for optical simulations, <a href="http://www.gwoptics.org/finesse/" target="_blank"> www.gwoptics.org/finesse/</a></td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td>Finally, the phase plate employed in the present experiment was manufactured by Jenoptik GmbH, based on a custom design provided by the Authors.</td>
		</tr>
	</tbody>
</table>

the generation of higher-order laguerre-gauss optical beams for high-precision interferometry

Le bruit thermique dans les miroirs de haute réflectivité est un obstacle majeur pour plusieurs types d&#39;expériences de haute précision interférométrique qui visent à atteindre la limite quantique standard ou pour refroidir les systèmes mécaniques à leur état quantique fondamental. C&#39;est par exemple le cas est prévu des futurs observatoires d&#39;ondes gravitationnelles, dont la sensibilité aux signaux d&#39;ondes gravitationnelles être limitée dans la bande de fréquence la plus sensible, par les vibrations atomiques de leurs masses de miroir. Une approche prometteuse poursuivis pour surmonter cette limitation est d&#39;employer d&#39;ordre supérieur Laguerre-Gauss (LG) faisceaux optiques à la place du mode fondamental classiquement utilisés. En raison de leur distribution d&#39;intensité de lumière plus homogène de ces faisceaux en moyenne plus efficace sur les fluctuations de la surface du miroir, ce qui réduit l&#39;incertitude sur la position du rétroviseur détectée par la lumière laser alimentés en chaleur. Nous démontrons une méthode prometteuse pour générer desd&#39;ordre supérieur LG faisceaux par mise en forme d&#39;un faisceau gaussien fondamental à l&#39;aide d&#39;éléments optiques diffractifs. Nous montrons que, avec détection conventionnelles et des techniques de contrôle qui sont connus pour stabiliser les faisceaux laser fondamentaux, LG modes d&#39;ordre supérieur peuvent être purifiées et stabilisées tout aussi bien à un niveau comparativement élevé. Un ensemble d&#39;outils de diagnostic nous permet de contrôler et d&#39;adapter les propriétés des faisceaux LG générés. Cela nous a permis de produire un faisceau LG avec la plus grande pureté rapporté à ce jour. La compatibilité démontrée des modes d&#39;ordre supérieur LG avec des techniques d&#39;interférométrie standard et avec l&#39;utilisation d&#39;optiques sphériques standards en fait un candidat idéal pour une utilisation dans une future génération de l&#39;interférométrie de haute précision.

All the experimental results so far described in the text and shown in the figures constitute a representative example of a successful execution of the beam conversion protocol. The most representative result is the purity of the generated beam: a successful beam conversion should lead to a beam purity on the order of 95% or above. A good example of successful beam conversion is the measurement of the intensity profile of an 82.8 Watts, 96% pure LG33 beam obtained in 21 and here shown in Figure 12.
Similarly, as discussed in protocol sections, the mode conversion efficiencies of the phase plate and of the overall experimental setup are a good indicator of the successful design of the experimental apparatus, including the phase plate and the mode cleaner cavity. Values of order 50% to 60% and above are generally considered a good value for the mode conversion efficiency. The highest conversion efficiency reported so far with this type of setup is about 70% 21.
The simulation investigation described in Protocol Sec 4 should result in numbers for beam purity with realistic mirrors, suggested mirror specifications and the resulting beam purity when these specifications are adopted. An example of the results you can expect with realistic mirror maps are shown in 19 where an original LG33 purity of 89% is obtained, compared to a purity of &gt;99% for HG00. A purity of &gt;99% for the LG33 mode is achieved using specific mirror requirements with a major reduction of astigmatism in the mirror surface.
<img alt="Figure 1" src="/files/ftp_upload/50564/50564fig1.jpg" /> 
Figure 1. Intensity patterns for Hermite-Gauss (HG) modes up to order 6. The intensity patterns are normalized to have the same peak intensity, for visibility.
<img alt="Figure 2" src="/files/ftp_upload/50564/50564fig2.jpg" /> 
Figure 2. Intensity patterns for helical LG modes up to order 9. The intensity patterns are normalized to have the same peak intensity, for visibility.
<img alt="Figure 3" fo:conten-width="5in" fo:src="/files/ftp_upload/50564/50564fig3highres.jpg" src="/files/ftp_upload/50564/50564fig3.jpg" /> 
Figure 3. Sketch of a conventional setup for production and stabilization of HG00 beams.
<img alt="Figure 4" fo:conten-width="5in" fo:src="/files/ftp_upload/50564/50564fig4highres.jpg" src="/files/ftp_upload/50564/50564fig4.jpg" /> 
Figure 4. A sketch of the experimental setup discussed in this paper. The HG00 beam is first mode-matched to a desired waist size via a telescope then injected on the phase plate. The main diffracted beam is separated from the higher diffraction orders with an aperture and then sent to the Mode Cleaner cavity. A photodiode is used to extract the error signal for controlling the cavity length. The beam intensity is analyzed by a CCD camera.
<img alt="Figure 5" src="/files/ftp_upload/50564/50564fig5.jpg" /> 
Figure 5. Phase modulation profile to convert a HG00 mode to LG33 mode.
<img alt="Figure 6" src="/files/ftp_upload/50564/50564fig6.jpg" /> 
Figure 6. Example of blazed phase modulation profiles for generating LG33 modes.
<img alt="Figure 7" src="/files/ftp_upload/50564/50564fig7.jpg" /> 
Figure 7. Comparison between the intensity distribution of the composite beam generated by the phase plate (left) and the theoretical intensity distribution for a pure LG33 beam with same parameters.
<img alt="Figure 8" src="/files/ftp_upload/50564/50564fig8.jpg" /> 
Figure 8. Example of beam intensity profile fitting applied to a real LG33 beam transmitted from a phase plate (left) compared to fit results (center) and residuals of fit (right). <a href="https://www.jove.com/files/ftp_upload/50564/50564fig8large.jpg" target="_blank"> Click here to view larger figure</a>.
<img alt="Figure 9" fo:conten-width="4.5in" fo:src="/files/ftp_upload/50564/50564fig9highres.jpg" src="/files/ftp_upload/50564/50564fig9.jpg" /> 
Figure 9. Profile of an LG33 beam with Gaussian fit shown for comparison.
<img alt="Figure 10" fo:conten-width="4.5in" fo:src="/files/ftp_upload/50564/50564fig10highres.jpg" src="/files/ftp_upload/50564/50564fig10.jpg" /> 
Figure 10. Light power transmitted by a linear cavity as a function of the cavity length, when injecting a beam generated by the phase plate. The resonant peaks at 0 and 1 FSR correspond to the desired LG33 mode. A fit to this dominant mode is shown for comparison (blue line). The red curve shows the result of the numerical model, based on the modal content described in Table 2. Pictures of the unwanted beams to be filtered by the cavity are shown in the insets.
<img alt="Figure 11" fo:conten-width="5in" fo:src="/files/ftp_upload/50564/50564fig11highres.jpg" src="/files/ftp_upload/50564/50564fig11.jpg" /> 
Figure 11. An example of a mirror surface map for one of the Advanced LIGO optical mirrors 19.
<img alt="Figure 12" src="/files/ftp_upload/50564/50564fig12.jpg" /> 
Figure 12. Intensity profile of a 82.8 W LG33 beam transmitted by a linear cavity (left) compared with fit residuals (right).
<table border="1">
	<tbody>
		<tr>
			<td>p</td>
			<td>l</td>
			<td>0</td>
			<td>1</td>
			<td>2</td>
			<td>3</td>
			<td>4</td>
			<td>5</td>
			<td>6</td>
			<td>7</td>
			<td>8</td>
			<td>9</td>
		</tr>
		<tr>
			<td colspan="2">0</td>
			<td>1.0</td>
			<td>2.8</td>
			<td>1.7</td>
			<td>2.0</td>
			<td>2.2</td>
			<td>2.5</td>
			<td>2.6</td>
			<td>3.1</td>
			<td>3.0</td>
			<td>3.2</td>
		</tr>
		<tr>
			<td colspan="2">1</td>
			<td>1.7</td>
			<td>2.7</td>
			<td>2.2</td>
			<td>2.4</td>
			<td>2.6</td>
			<td>2.8</td>
			<td>2.9</td>
			<td>2.8</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td colspan="2">2</td>
			<td>2.2</td>
			<td>2.4</td>
			<td>2.5</td>
			<td>2.7</td>
			<td>2.9</td>
			<td>3.0</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td colspan="2">3</td>
			<td>2.5</td>
			<td>2.7</td>
			<td>2.8</td>
			<td>3.0</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td colspan="2">4</td>
			<td>2.9</td>
			<td>3.0</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
	</tbody>
</table>
Table 1. Optimum ratio between input HG00 beam size and LGpl phase image beam size for LG modes up to the order 9.
<table border="1">
	<tbody>
		<tr>
			<td>Mode</td>
			<td>LG33</td>
			<td>LG63</td>
			<td>LG43</td>
			<td>LG53</td>
			<td>LG32</td>
			<td>LG62</td>
		</tr>
		<tr>
			<td>Power</td>
			<td>75%</td>
			<td>8%</td>
			<td>4%</td>
			<td>4%</td>
			<td>4%</td>
			<td>1%</td>
		</tr>
	</tbody>
</table>
Table 2. Mode content analysis described by the cavity scan shown in Figure 10.

Watch this Scientific Journal Video about The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry at JoVE.com

The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

Large laser-interferometers are being constructed to create a new type of astronomy based on gravitational waves. Their sensitivities, as for many other high-precision experiments, are approaching fundamental noise limits such as the atomic vibration of their components. We are pioneering technologies to overcome these limits using novel laser beam shapes.

La génération de d&#39;ordre supérieur Laguerre-Gauss faisceaux optiques pour l&#39;interférométrie de haute précision

Thermal noise in high-reflectivity mirrors is a major impediment for several  types of high-precision interferometric experiments that aim to reach the  ...

the-generation-higher-order-laguerre-gauss-optical-beams-for-high

Research

Education

JoVE Journal

JoVE Core

Physics

Engineering

Unit 1

Gravitation

SCIENTISTS IN ACTION

21.5K vues.  University of Birmingham. Large laser-interferometers are being constructed to create a new type of astronomy based on gravitational waves. Their sensitivities, as for many other high-precision experiments, are approaching fundamental noise limits such as the atomic vibration of their components. We are pioneering technologies to overcome these limits using novel laser beam shapes.

Vidéo: The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

Construction and Testing of Coin Cells of Lithium Ion Batteries

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime. Lithium ion batteries have also been considered to be used in electric and hybrid vehicles1 or even electrical grid stabilization systems2. All these applications simulate a dramatic increase in the research and development of battery materials3-7, including new materials3,8, doping9, nanostructuring10-13, coatings or surface modifications14-17 and novel binders18. Consequently, an increasing number of physicists, chemists and materials scientists have recently ventured into this area. Coin cells are widely used in research laboratories to test new battery materials; even for the research and development that target large-scale and high-power applications, small coin cells are often used to test the capacities and rate capabilities of new materials in the initial stage. 
 In 2010, we started a National Science Foundation (NSF) sponsored research project to investigate the surface adsorption and disordering in battery materials (grant no. DMR-1006515). In the initial stage of this project, we have struggled to learn the techniques of assembling and testing coin cells, which cannot be achieved without numerous help of other researchers in other universities (through frequent calls, email exchanges and two site visits). Thus, we feel that it is beneficial to document, by both text and video, a protocol of assembling and testing a coin cell, which will help other new researchers in this field. This effort represents the "Broader Impact" activities of our NSF project, and it will also help to educate and inspire students.
In this video article, we document a protocol to assemble a CR2032 coin cell with a LiCoO2 working electrode, a Li counter electrode, and (the mostly commonly used) polyvinylidene fluoride (PVDF) binder. To ensure new learners to readily repeat the protocol, we keep the protocol as specific and explicit as we can. However, it is important to note that in specific research and development work, many parameters adopted here can be varied. First, one can make coin cells of different sizes and test the working electrode against a counter electrode other than Li. Second, the amounts of C black and binder added into the working electrodes are often varied to suit the particular purpose of research; for example, large amounts of C black or even inert powder were added to the working electrode to test the "intrinsic" performance of cathode materials14. Third, better binders (other than PVDF) have also developed and used18. Finally, other types of electrolytes (instead of LiPF6) can also be used; in fact, certain high-voltage electrode materials will require the uses of special electrolytes7.

A protocol to construct and test coin cells of lithium ion batteries is described. The specific procedures of making a working electrode, preparing a counter electrode, assembling a cell inside a glovebox and testing the cell are presented.

Construction et d&#39;essai des Piles de batteries lithium-ion

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime.  Lithium ion ...

Recherche

Ingénierie

Fabricating Metamaterials Using the Fiber Drawing Method

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe their electromagnetic properties to the structure of their constituents, instead of the atoms that compose them. For example, sub-wavelength metal wires can be arranged to possess an effective electric permittivity that is either positive or negative at a given frequency, in contrast to the metals themselves 2. This unprecedented control over the behaviour of light can potentially lead to a number of novel devices, such as invisibility cloaks 3, negative refractive index materials 4, and lenses that resolve objects below the diffraction limit 5. However, metamaterials operating at optical, mid-infrared and terahertz frequencies are conventionally made using nano- and micro-fabrication techniques that are expensive and produce samples that are at most a few centimetres in size 6-7. Here we present a fabrication method to produce hundreds of meters of metal wire metamaterials in fiber form, which exhibit a terahertz plasmonic response 8. We combine the stack-and-draw technique used to produce microstructured polymer optical fiber 9 with the Taylor-wire process 10, using indium wires inside polymethylmethacrylate (PMMA) tubes. PMMA is chosen because it is an easy to handle, drawable dielectric with suitable optical properties in the terahertz region; indium because it has a melting temperature of 156.6 &deg;C which is appropriate for codrawing with PMMA. We include an indium wire of 1 mm diameter and 99.99% purity in a PMMA tube with 1 mm inner diameter (ID) and 12 mm outside diameter (OD) which is sealed at one end. The tube is evacuated and drawn down to an outer diameter of 1.2 mm. The resulting fiber is then cut into smaller pieces, and stacked into a larger PMMA tube. This stack is sealed at one end and fed into a furnace while being rapidly drawn, reducing the diameter of the structure by a factor of 10, and increasing the length by a factor of 100. Such fibers possess features on the micro- and nano- scale, are inherently flexible, mass-producible, and can be woven to exhibit electromagnetic properties that are not found in nature. They represent a promising platform for a number of novel devices from terahertz to optical frequencies, such as invisible fibers, woven negative refractive index cloths, and super-resolving lenses.

Metamaterials at terahertz frequencies offer unique opportunities, but are challenging to fabricate in bulk. We adapt the fabrication procedure for microstructured polymer optical fibers to inexpensively fabricate metamaterials potentially on an industrial scale. We produce polymethylmethacrylate fibers containing ~10 &mu;m diameter indium wires separated by ~100 &mu;m, which exhibit a terahertz plasmonic response.

Les métamatériaux Fabricating aide de la méthode de tirage de fibre

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe ...

Optical Trapping of Nanoparticles

Optical trapping is a technique for immobilizing and manipulating small objects in a gentle way using light, and it has been widely applied in trapping and manipulating small biological particles. Ashkin and co-workers first demonstrated optical tweezers using a single focused beam1. The single beam trap can be described accurately using the perturbative gradient force formulation in the case of small Rayleigh regime particles1. In the perturbative regime, the optical power required for trapping a particle scales as the inverse fourth power of the particle size. High optical powers can damage dielectric particles and cause heating. For instance, trapped latex spheres of 109 nm in diameter were destroyed by a 15 mW beam in 25 sec1, which has serious implications for biological matter2,3.
A self-induced back-action (SIBA) optical trapping was proposed to trap 50 nm polystyrene spheres in the non-perturbative regime4. In a non-perturbative regime, even a small particle with little permittivity contrast to the background can influence significantly the ambient electromagnetic field and induce a large optical force. As a particle enters an illuminated aperture, light transmission increases dramatically because of dielectric loading. If the particle attempts to leave the aperture, decreased transmission causes a change in momentum outwards from the hole and, by Newton's Third Law, results in a force on the particle inwards into the hole, trapping the particle. The light transmission can be monitored; hence, the trap can become a sensor. The SIBA trapping technique can be further improved by using a double-nanohole structure.
The double-nanohole structure has been shown to give a strong local field enhancement5,6. Between the two sharp tips of the double-nanohole, a small particle can cause a large change in optical transmission, thereby inducing a large optical force. As a result, smaller nanoparticles can be trapped, such as 12 nm silicate spheres7 and 3.4 nm hydrodynamic radius bovine serum albumin proteins8. In this work, the experimental configuration used for nanoparticle trapping is outlined. First, we detail the assembly of the trapping setup which is based on a Thorlabs Optical Tweezer Kit. Next, we explain the nanofabrication procedure of the double-nanohole in a metal film, the fabrication of the microfluidic chamber and the sample preparation. Finally, we detail the data acquisition procedure and provide typical results for trapping 20 nm polystyrene nanospheres.

The following setup approach details low power optical trapping of dielectric nanoparticles using a double-nanohole in metal film.

Le piégeage optique de nanoparticules

Optical trapping is a technique for immobilizing and manipulating small objects in a gentle way using light, and it has been widely applied in trapping ...

Bringing the Visible Universe into Focus with Robo-AO

The angular resolution of ground-based optical telescopes is limited by the degrading effects of the turbulent atmosphere. In the absence of an atmosphere, the angular resolution of a typical telescope is limited only by diffraction, i.e., the wavelength of interest, &lambda;, divided by the size of its primary mirror's aperture, D. For example, the Hubble Space Telescope (HST), with a 2.4-m primary mirror, has an angular resolution at visible wavelengths of ~0.04 arc seconds. The atmosphere is composed of air at slightly different temperatures, and therefore different indices of refraction, constantly mixing. Light waves are bent as they pass through the inhomogeneous atmosphere. When a telescope on the ground focuses these light waves, instantaneous images appear fragmented, changing as a function of time. As a result, long-exposure images acquired using ground-based telescopes - even telescopes with four times the diameter of HST - appear blurry and have an angular resolution of roughly 0.5 to 1.5 arc seconds at best.
Astronomical adaptive-optics systems compensate for the effects of atmospheric turbulence. First, the shape of the incoming non-planar wave is determined using measurements of a nearby bright star by a wavefront sensor. Next, an element in the optical system, such as a deformable mirror, is commanded to correct the shape of the incoming light wave. Additional corrections are made at a rate sufficient to keep up with the dynamically changing atmosphere through which the telescope looks, ultimately producing diffraction-limited images.
The fidelity of the wavefront sensor measurement is based upon how well the incoming light is spatially and temporally sampled1. Finer sampling requires brighter reference objects. While the brightest stars can serve as reference objects for imaging targets from several to tens of arc seconds away in the best conditions, most interesting astronomical targets do not have sufficiently bright stars nearby. One solution is to focus a high-power laser beam in the direction of the astronomical target to create an artificial reference of known shape, also known as a 'laser guide star'. The Robo-AO laser adaptive optics system2,3 employs a 10-W ultraviolet laser focused at a distance of 10 km to generate a laser guide star. Wavefront sensor measurements of the laser guide star drive the adaptive optics correction resulting in diffraction-limited images that have an angular resolution of ~0.1 arc seconds on a 1.5-m telescope.

Light from astronomical objects must travel through the earth's turbulent atmosphere before it can be imaged by ground-based telescopes. To enable direct imaging at maximum theoretical angular resolution, advanced techniques such as those employed by the Robo-AO adaptive-optics system must be used.

Amener l&#39;Univers visible en discussion avec Robo-AO

The angular  resolution of ground-based optical telescopes is limited by the degrading  effects of the turbulent atmosphere. In the absence of an ...

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats &amp; Spheres

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~&#955;/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher.

A novel optical polishing process, called &#8220;Convergent Polishing&#8221;, which enables faster, lower cost polishing, is described. Unlike conventional polishing processes, Convergent Polishing allows a glass workpiece to be polished in a single iteration and with high surface quality to its final surface figure without requiring changes to polishing parameters.

Convergent Polissage: un simple, processus rapide, pleine ouverture de polissage de haute qualité optiques Flats &amp; Sphères

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial ...

Patterning via Optical Saturable Transitions - Fabrication and Characterization

This protocol describes the fabrication and characterization of nanostructures using a novel nanolithographic technique called Patterning via Optical Saturable Transitions (POST). In this technique the chemical properties of organic photochromic molecules that undergo single-photon reactions are exploited, enabling rapid top-down nanopatterning over large areas at low light intensities, thereby, allowing for the circumvention of the far-field diffraction barrier.4 Simple, cost-effective, high throughput and resolution alternatives to nanopatterning are being explored, such as, two-photon polymerization5,6, beam pen lithography (BPL)7, scanning electron beam lithography (SEBL), and focused ion beam (FIB) patterning. However, multi-photon approaches require high light intensities, which limit their potential for high throughput and offer low image contrast. Although, electron and ion beam lithographic processes offer increased resolution, the serial nature of the process is limited to slow writing speeds, which also prevents patterning of features over large areas. Beam-pen lithography is an approach towards parallel near-field optical lithography. However, the gap between the source of the beam and the surface of the photoresist needs to be controlled extremely precisely for good pattern uniformity and this is very challenging to accomplish for large arrays of beams. Patterning via Optical Saturable Transitions (POST) is an alternative optical nanopatterning technique for patterning sub-wavelength features1-3. Since this technique uses single photons instead of electrons, it is extremely fast and does not require high light intensities1-3, opening the door to massive parallelization.

We report that the diffraction limit of conventional optical lithography can be overcome by exploiting the transitions of organic photochromic derivatives induced by their photoisomerization at low light intensities.1-3 This paper outlines our fabrication technique and two locking mechanisms, namely: dissolution of one photoisomer and electrochemical oxidation.

Patterning par Transitions Optical saturable - Fabrication et caractérisation

This protocol describes the fabrication and characterization of nanostructures using a novel nanolithographic technique called Patterning via Optical ...

Writing Bragg Gratings in Multicore Fibers

Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong suppression at a single wavelength requires that all cores have matching transmission profiles. These gratings cannot be inscribed using the same method as for single-core fibers because the curved surface of the cladding acts as a lens, focusing the incoming UV laser beam and causing variations in exposure between cores. Therefore we use an additional optical element to ensure that the beam shape does not change while passing through the cross-section of the multicore fiber. This consists of a glass capillary tube which has been polished flat on one side, which is then placed over the section of the fiber to be inscribed. The laser beam enters the fiber through the flat surface of the capillary tube and hence maintains its original dimensions. This paper demonstrates the improvements in core-to-core uniformity for a 7-core fiber using this method. The technique can be generalized to larger multicore fibers.

We describe a technique for inscribing identical fiber Bragg gratings into each core of a multicore fiber. This is achieved by introducing an additional surface into the optical path to mitigate lensing by the curved surface of the fiber cladding.

Rédaction de Bragg dans les fibres multipaires

Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong ...

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization

A micro-electro-mechanical-system (MEMS) is a widely used component in many industries, including energy, biotechnology, medical, communications, and automotive. However, effective inspection and characterization metrology systems are needed to ensure the functional reliability of MEMS. This study presents a system based on digital holography as a tool for MEMS metrology. Digital holography has gained increasing attention in the past 20 years. With the fast development and decreasing cost of sensor arrays, resolution of such systems has increased broadening potential applications. Thus, it has attracted attention from both research and industry sides as a potential reliable tool for industrial metrology. Indeed, by recording the interference pattern between an object beam (which contains sample height information) and a reference beam on a CCD camera, one can retrieve the quantitative phase information of an object. However, most of digital holographic systems are bulky and thus not easy to implement on industry production lines. The novelty of the system presented is that it is lens-less and thus very compact. In this study, it is shown that the Compact Digital Holographic Microscope (CDHM) can be used to evaluate several characteristics typically consider as criteria in MEMS inspections. The surface profiles of MEMS in both static and dynamic conditions are presented. Comparison with AFM is investigated to validate the accuracy of the CDHM.

We present a compact reflection digital holographic system (CDHM) for inspection and characterization of MEMS devices. A lens-less design using a diverging input wave providing natural geometrical magnification is demonstrated. Both static and dynamic studies are presented.

Compact numérique Holographic Microscope pour les MEMS Inspection et caractérisation de Lens-moins

A micro-electro-mechanical-system (MEMS) is a widely used component in many industries, including energy, biotechnology, medical, communications, and ...

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

The scanning light scattering profiler (SLSP) methodology has been developed for the full-angle quantitative evaluation of forward and backward light scattering from intraocular lenses (IOLs) using goniophotometer principles. This protocol describes the SLSP platform and how it employs a 360&#176; rotational photodetector sensor that is scanned around an IOL sample while recording the intensity and location of scattered light as it passes through the IOL medium. The SLSP platform can be used to predict, non-clinically, the propensity for current and novel IOL designs and materials to induce light scatter. Non-clinical evaluation of light scattering properties of IOLs can significantly reduce the number of patient complaints related to unwanted glare, glistening, optical defects, poor image quality, and other phenomena associated with the unintended light scattering. Future studies should be conducted to correlate SLSP data with clinical results to help identify which measured light scatter is most problematic for patients that have undergone cataract surgery subsequent to IOL implantation.

Scanning Light Scattering Profiler SLPS Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

This protocol describes the scanning light scattering profiler (SLSP) that enables the full-angle quantitative evaluation of forward and backward scattering of light from intraocular lenses (IOLs) using goniophotometer principles.

Méthodologie basée sur le Profiler de diffusion de lumière de balayage (SLPS) pour évaluer quantitativement la diffusion de lumière vers l&#39;avant et vers l&#39;arrière à partir de lentilles intraoculaires

The scanning light scattering profiler (SLSP) methodology has been developed for the full-angle quantitative evaluation of forward and backward light ...

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

This paper describes three methods of preparing fluorescent microspheres comprising &#960;-conjugated or non-conjugated polymers: vapor diffusion, interface precipitation, and mini-emulsion. In all methods, well-defined, micrometer-sized spheres are obtained from a self-assembling process in solution. The vapor diffusion method can result in spheres with the highest sphericity and surface smoothness, yet the types of the polymers able to form these spheres are limited. On the other hand, in the mini-emulsion method, microspheres can be made from various types of polymers, even from highly crystalline polymers with coplanar, &#960;-conjugated backbones. The photoluminescent (PL) properties from single isolated microspheres are unusual: the PL is confined inside the spheres, propagates at the circumference of the spheres via the total internal reflection at the polymer/air interface, and self-interferes to show sharp and periodic resonant PL lines. These resonating modes are so-called "whispering gallery modes" (WGMs). This work demonstrates how to measure WGM PL from single isolated spheres using the micro-photoluminescence (&#181;-PL) technique. In this technique, a focused laser beam irradiates a single microsphere, and the luminescence is detected by a spectrometer. A micromanipulation technique is then used to connect the microspheres one by one and to demonstrate the intersphere PL propagation and color conversion from coupled microspheres upon excitation at the perimeter of one sphere and detection of PL from the other microsphere. These techniques, &#181;-PL and micromanipulation, are useful for experiments on micro-optic application using polymer materials.

Protocols for the synthesis of microspheres from polymers, the manipulation of microspheres, and micro-photoluminescence measurements are presented.