Funding by the German Environmental Foundation (DBU) is acknowledged. The authors thank Ute Kuhlicke for technical help with CLSM analysis and Birgit W&#252;rz, Rita Remer, and Jana Reichenbach for skilled experimental help. The authors would particularly like to thank Prof. Jan Roelof van der Meer and Dr. Robin Tecon for fruitful discussion and providing the bioreporter strain. It contributes to the &#8216;Chemicals in the Environment&#8217; (CITE) research program of the Helmholtz Association.

<ol>
	<li>Holden, P. A., Fierer, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microbial+processes+in+the+vadose+zone.">Microbial processes in the vadose zone.</a> Vadose Zone Journal. 4, 1-21 (2005).</li><li>Whitman, W. B., Coleman, D. C., Wiebe, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prokaryotes:+The+unseen+majority.">Prokaryotes: The unseen majority.</a> Proceedings of the National Academy of Sciences. 95, 6578-6583 (1998).</li><li>Kieft, T. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microbial+abundance+and+activities+in+relation+to+water+potential+in+the+vadose+zones+of+arid+and+semiarid+sites.">Microbial abundance and activities in relation to water potential in the vadose zones of arid and semiarid sites.</a> Microbial ecology. 26, 59-78 (1993).</li><li>Wang, G., Or, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aqueous+films+limit+bacterial+cell+motility+and+colony+expansion+on+partially+saturated+rough+surfaces.">Aqueous films limit bacterial cell motility and colony expansion on partially saturated rough surfaces.</a> Environ. Microbiol. 12, 1363-1373 (2010).</li><li>Griffin, D. M., Parr, J. F., Gardner, W. R., Elliott, L. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Water Potential Relations in Soil Microbiology SSSA Special Publication. , 141-151 (1981).</li><li>Papendick, R. I., Camprell, G. S., Parr, J. F., Gardner, W. R., Elliott, L. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Water Potential Relations in Soil Microbiology SSSA Special Publication. , 1-22 (1981).</li><li>Boswell, G. P., Jacobs, H., Davidson, F. A., Gadd, G. M., Ritz, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+consequences+of+nutrient+translocation+in+mycelial+fungi.">Functional consequences of nutrient translocation in mycelial fungi.</a> J. Theor. Biol. 217, 459-477 (2002).</li><li>Jennings, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Translocation+of+solutes+in+fungi.">Translocation of solutes in fungi.</a> Biol. Rev. Camb. Philos. Soc. 62, 215-243 (1987).</li><li>Bais, H. P., Weir, T. L., Perry, L. G., Gilroy, S., Vivanco, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+root+exudates+in+rhizosphere+interactions+with+plants+and+other+organisms.">The role of root exudates in rhizosphere interactions with plants and other organisms.</a> Annu. Rev. Plant Biol. 57, 233-266 (2006).</li><li>Furuno, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mycelia+promote+active+transport+and+spatial+dispersion+of+polycyclic+aromatic+hydrocarbons.">Mycelia promote active transport and spatial dispersion of polycyclic aromatic hydrocarbons.</a> Environ. Sci. Technol. 46, 5463-5470 (2012).</li><li>Gao, Y., Cheng, Z., Ling, W., Huang, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arbuscular+mycorrhizal+fungal+hyphae+contribute+to+the+uptake+of+polycyclic+aromatic+hydrocarbons+by+plant+roots.">Arbuscular mycorrhizal fungal hyphae contribute to the uptake of polycyclic aromatic hydrocarbons by plant roots.</a> Bioresour. Technol. 101, 6895-6901 (2010).</li><li>Semple, K. T., Morriss, A. W. J., Paton, G. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bioavailability+of+hydrophobic+organic+contaminants+in+soils:+fundamental+concepts+and+techniques+for+analysis.">Bioavailability of hydrophobic organic contaminants in soils: fundamental concepts and techniques for analysis.</a> Eur. J. Soil. Sci. 54, 809-818 (2003).</li><li>Tecon, R., Binggeli, O., vander Meer, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Double-tagged+fluorescent+bacterial+bioreporter+for+the+study+of+polycyclic+aromatic+hydrocarbon+diffusion+and+bioavailability.">Double-tagged fluorescent bacterial bioreporter for the study of polycyclic aromatic hydrocarbon diffusion and bioavailability.</a> Environ. Microbiol. 11, 2271-2283 (2009).</li><li>Tecon, R., Wells, M., vander Meer, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+green+fluorescent+protein-based+bacterial+biosensor+for+analysing+phenanthrene+fluxes.">A new green fluorescent protein-based bacterial biosensor for analysing phenanthrene fluxes.</a> Environ. Microbiol. 8, 697-708 (2006).</li><li>Schamfuss, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impact+of+mycelia+on+the+accessibility+of+fluorene+to+PAH-degrading+bacteria.">Impact of mycelia on the accessibility of fluorene to PAH-degrading bacteria.</a> Environ. Sci. Technol. 47, 6908-6915 (2013).</li><li>Smibert, R. M., Krieg, R. M., Gerhardt, P., Murray, R. G. E., Costilow, R. N., Nester, E. W., Wood, W. A., Krieg, N. R., Phillips, G. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Manual of methods for general bacteriology. 19, 409-443 (1981).</li><li>Wu, C. H., Warren, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Natural+autofluorescence+in+fungi+and+its+correlation+with+viability.">Natural autofluorescence in fungi and its correlation with viability.</a> Mycologia. 76, 1049-1058 (1984).</li><li>Schneider, C. A., Rasband, W. S., Eliceiri, K. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=NIH+Image+to+ImageJ:+25+years+of+image+analysis.">NIH Image to ImageJ: 25 years of image analysis.</a> Nat. Methods. 9, 671-675 (2012).</li><li>Pedersen, C., Sylvia, D., Mukerji, K. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ch.+8+Concepts+in+Mycorrhizal+Research.">Ch. 8 Concepts in Mycorrhizal Research.</a> Handbook of Vegetation Science. Vol. 19, 195-222 (1996).</li><li>Furuno, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fungal+mycelia+allow+chemotactic+dispersal+of+polycyclic+aromatic+hydrocarbon-degrading+bacteria+in+water-unsaturated+systems.">Fungal mycelia allow chemotactic dispersal of polycyclic aromatic hydrocarbon-degrading bacteria in water-unsaturated systems.</a> Environ. Microbiol. 12, 1391-1398 (2010).</li></ol>

The authors declare that they have no competing financial interest.

התקנת מיקרוקוסמוס הציגה הוכיחה מתאימה ללמוד את הזמינות הביולוגית של כימיקלים מופרדים מרחבית למשפילה אורגניזמים לאחר הספיגה והובלה בmycelia. תחבורת גז שלב פוטנציאלית של תרכובות נדיפות באופן חלקי מנוע ויכול להיות דמיינו תאי bioreporter חיידקים ללא הכנת מדגם משוכללת ובכך עם ?...

אדמה מאוכלסת בצפיפות על ידי מגוון רחב של מיקרואורגניזמים 1,2 כגון חיידקים. עם זאת, תנאים בבית גידול זה הם מאתגרים, במיוחד במונחים של מים זמינות 3. חיידקים זקוקים באופן קבוע כדי לחפש תנאים אופטימליים בסביבות הטרוגניות 4, אבל היעדר סרטי מים רציפים וכתוצאה מכך הניידות הוגבלה 5 מעכב אותם כדי להפיץ באופן חופשי. כמו כן, שיעורי דיפוזיה של מומסים (למשל, חומרים מזינים) הם הורידו בתנאים בלתי רוויים 6. לפיכך, חיידקים וחומרים מזינים לעתים קרובות מופרדים פיזי ונגישות תזונתית מוגבלת 3. כתוצאה מכך, וקטור תחבורה לתרכובות כימיות שאינו דורש מים שלב רציף יכול לעזור להתגבר על מגבלות אלה. למעשה, מיקרואורגניזמים רבים כגון פטריות וoomycetes פיתחו צורת צמיחת פילמנטיות מאפשרת להם לגדול דרך נקבובי אוויר מלא ובכך להגיע וmobilizing גם פיזי מופרד חומרים מזינים 7 ו -8 חומרי פחמני על פני מרחקים ארוכים. הם עשויים אפילו לשמש כוקטורי תחבורה ביולוגיים אשר מספקים סוכרים ומקורות אנרגיה אחרים לחיידקי 9. ספיגה והובלה ביצורים mycelial גם הוכחו למזהמים אורגניים הידרופובי כגון פחמימנים ארומטיים polycyclic (PAH) בPythium ultimum 10 או בפטריות mycorrhizal arbuscular 11. מאז PAH הם מזהמי מים נמצאים בכל מקום ומסיסים היטב 12 באדמה, תחבורה בתיווך mycelia עשויה לסייע להגביר את הזמינות הביולוגית מזהם לdegraders חיידקים פוטנציאלי. למרות שהסכום הכולל של מזהם ניתן לכמת באופן ישיר על ידי אמצעים כימיים 10, הזמינות הביולוגית של מזהמים מועברים על ידי mycelia לחיידקי מפרקים ואורגניזמים אחרים לא ניתן להעריך בקלות. הפרוטוקול הבא מציג שיטה להערכת ההשפעה של myceליה על זמינות ביולוגית מזהם לdegraders חיידקים באופן ישיר; הוא מאפשר איסוף מידע על השפעת spatiotemporal של מזהמים על מערכות אקולוגיות של חיידקים. אנו מתארים כיצד להגדיר את מערכת מיקרוקוסמוס בלתי רוויה משוכללת מחקה ממשקי אוויר-מים בקרקע על ידי קישור מקור נקודת PAH מופרד פיזי עם חיידקי bioreporter PAH-משפיל באמצעות וקטורי תחבורת mycelial. בגלל תחבורה מוטסת מודרה, את ההשפעה של תחבורה מבוססת mycelial על זמינות ביולוגית PAH לחיידקים ניתן ללמוד בדרך מבודדת. בפירוט רב יותר, RP037-mChe sartisoli fluorene שלוש טבעות PAH, האורגניזם mycelial Pythium ultimum וbioreporter חיידק Burkholderia 13 יושמו בsetups מיקרוקוסמוס תאר. B. החיידק sartisoli RP037-mChe נבנה במקור כדי ללמוד והנתיבים phenanthrene לתא 14 ומביע משופר חלבון פלואורסצנטי ירוק (eGFP) כתוצאה משטף PAH להתא, ואילו fluorescing האדום mCherry בא לידי ביטוי constitutively. מידע מפורט על בניית הכתב ניתן על ידי Tecon et al. 13 בבדיקות ראשוניות, עולה כי אין החיידק שחייה ורק יכולת רץ איטית מאוד. זה היה יכול להעביר לאט בעובש של ultimum Pythium כאשר מיושמים כהשעיה צפופה על גבי העובש. מאז חיידקים היו משובצים בagarose בפרוטוקול הבא, הגירה על העובש לא התרחשה. באמצעות מיקרוסקופ confocal סריקת לייזר (CLSM), ניתן דמיינו חיידקי bioreporter ישירות במיקרוקוסמוס וביטוי של eGFP ניתן לכמת ביחס לכמות תאים (הפרופורציונלית לאות mCherry) בעזרת ImageJ התוכנה. זה מאפשר השוואת זמינות ביולוגית איכותית בתרחישים שונים (כלומר, גבוה או נמוך יותר). שפעת נמצאה זמין ביולוגי לאחר תחבורת mycelial על ידי פ &#39; ultimum (כלומר, זההיה גבוה יותר מאשר בבקרה שלילית). יתר על כן, הפרוטוקול מתאר כיצד לכמת את הסכום הכולל של תחבורה בתיווך mycelia באמצעים כימיים וכדי לוודא את הזמינות הביולוגית מזהם באמצעות סיבים מצופים סיליקון זכוכית (סיבי SPME) במיקרוקוסמוס הזהה. תוצאות באמצעות התקנת מיקרוקוסמוס זה פורסמו ונדונו לשילוב של פ ultimum, fluorene ו- B. sartisoli 15 RP037-mChe. כאן, במוקד נמצא על תיאור מפורט ושיטת זיהוי בעיות הפוטנציאליות של הפרוטוקול כדי לספק את הידע הזה ליישומים נוספים פוטנציאליים. יישומים נוספים עשויים להיות כרוכים בפטריות שונות, מיני חיידקים (למשל, מאתרים מזוהמים), ומזהמים אחרים (למשל, חומרי הדברה) או זיהום אספקה ​​(למשל, קרקעות בגיל).

<table border="0" cellpadding="0" cellspacing="0" width="1158">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Name of Reagent/ Equipment</td>
			<td style="width:195px;">Company</td>
			<td style="width:128px;">Catalog Number</td>
			<td style="width:523px;">Comments/Description</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Confocal Microscope</td>
			<td style="width:195px;">Leica</td>
			<td style="width:128px;"></td>
			<td>TCS SP5X, LAS AF - Version 2.6.1; or equivalent CLSM</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">GC HP 7890 Series GC and Agilent 5975C MSD</td>
			<td>Agilent</td>
			<td style="width:128px;"></td>
			<td>an equivalent GC/MS may be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">GC capillary column J&#38;W 121-5522&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;</td>
			<td>Agilent</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Cork borer</td>
			<td style="width:195px;">Fisher Scientific</td>
			<td align="right">12863952</td>
			<td>or any other</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Cover slips</td>
			<td style="width:195px;">Marienfeld</td>
			<td style="width:128px;">107222</td>
			<td>High performance, No.1.5H</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">GC/MS insterts</td>
			<td style="width:195px;">WICOM</td>
			<td style="width:128px;">WIC 47080</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">GC/MS vials 2 ml</td>
			<td style="width:195px;">WICOM</td>
			<td style="width:128px;">WIC 41150</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Lids / septa for screw cap vials</td>
			<td style="width:195px;">DIONEX</td>
			<td>49463 / 049464&#160;</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Lids for GC/MS vials</td>
			<td style="width:195px;">WICOM</td>
			<td style="width:128px;">WIC 43948/B</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Objective Slides</td>
			<td style="width:195px;">Menzel</td>
			<td style="width:128px;"></td>
			<td>ordinary</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">PDMS coated glass fibers</td>
			<td style="width:195px;">Polymicro Technologies, Inc.</td>
			<td style="width:128px;"></td>
			<td>V (PDMS) = 13.55 &#177; 0.02 &#181;L m-1</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">Petri Dishes small / big</td>
			<td style="width:195px;">Greiner</td>
			<td style="width:128px;">633-102 / 628-102</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Screw cap vials 40 ml</td>
			<td style="width:195px;">DIONEX</td>
			<td>48783</td>
			<td>other glass vials may be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Screw cap vials 60 ml</td>
			<td style="width:195px;">DIONEX</td>
			<td>48784</td>
			<td>other glass vials may be used</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:313px;">Acenaphthylene d08</td>
			<td style="width:195px;">Dr. Ehrenstorfer</td>
			<td style="width:128px;">C 20510100</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Acetone</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">9372.2</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Activated carbon</td>
			<td style="width:195px;">Sigma-Aldrich</td>
			<td style="width:128px;">242276-1kg</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Agarose</td>
			<td style="width:195px;">Carl Roth</td>
			<td align="right">2267.4</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Fluorene</td>
			<td style="width:195px;">Fluka</td>
			<td style="width:128px;">46880</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">Kanamycin sulfate</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">T832.2</td>
			<td>50 mg L-1</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Methanol</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">P7171</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Minimal Medium:</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td>100 mL solution 1 + 25 mL solution 2 + 5 mL solution 3 ad. 1000 mL aqua dest</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160; Solution 1</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">&#160;&#160;&#160; Ammonium sulfate&#160;</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">3746.1</td>
			<td>5 g L-1&#160;</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;width:313px;">&#160;&#160;&#160; Magnesium chloride x 6 H2O</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">2189.1</td>
			<td>1 g L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;width:313px;">&#160;&#160;&#160; Calcium nitrate x 4 H2O</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">P740.1</td>
			<td>0.5 g L-1</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160; Solution 2</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">&#160;&#160;&#160; Disodium phosphate</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">P030.1</td>
			<td>55.83 g L-1</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">&#160;&#160;&#160; Monopotassium phosphate</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">3904.1</td>
			<td>20 g L-1</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160; Solution 3</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td>pH 6.0</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">&#160;&#160;&#160; Disodium EDTA</td>
			<td style="width:195px;">MERCK</td>
			<td style="width:128px;">1084180250</td>
			<td>0.8 g L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Iron(II) chloride x 4 H2O</td>
			<td style="width:195px;">MERCK</td>
			<td style="width:128px;">1038610250</td>
			<td>0.3 g L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Cobalt(II) chloride x 6 H2O</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">T889.3</td>
			<td>4 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Manganese(II) chloride x 1 H2O&#160;&#160;&#160;&#160;&#160;&#160;&#160;</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">&#160; 4320.2</td>
			<td>10 mg L-1</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">&#160;&#160;&#160; Copper(II) sulfate</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">&#160;P023.1</td>
			<td>1 mg L-1</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;">&#160;&#160;&#160; Sodium molybdate x 2 H2O</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">&#160;0274.1</td>
			<td>3 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Zinc chloride</td>
			<td style="width:195px;">MERCK</td>
			<td style="width:128px;">1088160250</td>
			<td>2 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Lithium chloride</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">P007.1</td>
			<td>0.5 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Tin(II) chloride x 2 H2O</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">4473.1</td>
			<td>0.5 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Boric acid</td>
			<td style="width:195px;">Riedel-de-Haen&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;</td>
			<td style="width:128px;">11606</td>
			<td>1 mg L-1</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">&#160;&#160;&#160; Potassium bromide</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">A137.1</td>
			<td>2 mg L-1</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">&#160;&#160;&#160; Potassium iodide</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">6750.1</td>
			<td>2 mg L-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">&#160;&#160;&#160; Barium chloride</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">4453.1</td>
			<td>0.5 mg L-1</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">MMA</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td>Minimal medium + agarose 0.2 %</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:313px;">Phenanthrene d10</td>
			<td style="width:195px;">Dr. Ehrenstorfer</td>
			<td style="width:128px;">C 20920100</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">Potato Dextrose Agar:</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td>24 g L-1 broth + bacto-agar 1.5 %; pH 6.8</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160;&#160;&#160; Potato Dextrose broth</td>
			<td>Difco/ Beckton Dickinson</td>
			<td style="width:128px;">254920</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160;&#160;&#160; Bacto-agar</td>
			<td>Difco/ Beckton Dickinson</td>
			<td align="right">214040</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Sodium acetate x 3 hydr.</td>
			<td style="width:195px;">Carl Roth</td>
			<td style="width:128px;">6779.1</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Sodium sulfate</td>
			<td style="width:195px;">MERCK</td>
			<td style="width:128px;">&#160;1066495000</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">Toluene</td>
			<td style="width:195px;">MERCK</td>
			<td style="width:128px;">1083252500</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:313px;">mTY medium:</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td>3 g L-1 yeast extract, 5 g L-1 bacto tryptone and 50 mM NaCl</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160;&#160;&#160; Yeast extract</td>
			<td style="width:195px;">Merck</td>
			<td>1037530500</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160;&#160;&#160; Tryptone</td>
			<td style="width:195px;">Serva</td>
			<td>4864702</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:313px;">&#160;&#160;&#160; Sodium chloride</td>
			<td style="width:195px;">Carl Roth</td>
			<td>3957.1</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">imageJ with logi tool plugin</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td style="width:523px;">http://rsb.info.nih.gov/ij/download.html and http://downloads.openmicroscopy.org/bio-formats/4.4.10</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">Pythium ultimum strain 67-1</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td style="width:523px;">Obtained from the lab of Dr. Christoph Keel; Department of Fundamental Microbiology, University of Lausanne, Switzerland</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:313px;">Burkholderia sartisoli RP037-mChe</td>
			<td style="width:195px;"></td>
			<td style="width:128px;"></td>
			<td style="width:523px;">Obtained from the lab of Prof. Jan Roelof van der Meer; Department of Fundamental Microbiology, University of Lausanne, Switzerland</td>
		</tr>
	</tbody>
</table>

a whole cell bioreporter approach to assess transport and bioavailability of organic contaminants in water unsaturated systems

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is not an appropriate measure for its availability; bioavailability rather depends on the dynamic interplay of potential mass transfer (flux) of a compound to a microbial cell and the capacity of the latter to degrade the compound. In water-unsaturated parts of the soil, mycelia have been shown to overcome bioavailability limitations by actively transporting and mobilizing organic compounds over the range of centimeters. Whereas the extent of mycelia-based transport can be quantified easily by chemical means, verification of the contaminant-bioavailability to bacterial cells requires a biological method. Addressing this constraint, we chose the PAH fluorene (FLU) as a model compound and developed a water unsaturated model microcosm linking a spatially separated FLU point source and the FLU degrading bioreporter bacterium Burkholderia sartisoli RP037-mChe by a mycelial network of Pythium ultimum. Since the bioreporter expresses eGFP in response of the PAH flux to the cell, bacterial FLU exposure and degradation could be monitored directly in the microcosms via confocal laser scanning microscopy (CLSM). CLSM and image analyses revealed a significant increase of the eGFP expression in the presence of P. ultimum compared to controls without mycelia or FLU thus indicating FLU bioavailability to bacteria after mycelia-mediated transport. CLSM results were supported by chemical analyses in identical microcosms. The developed microcosm proved suitable to investigate contaminant bioavailability and to concomitantly visualize the involved bacteria-mycelial interactions.

התוצאות שהוצגו כאן כבר פורסמה קודם לכן 15. נא עיין במאמר לדיון מכניסטית וסביבתי מפורט. לאחר הקלטת תמונה באמצעות CLSM, הקרנת עוצמה מקסימלית ניתן לבצע באמצעות תוכנת מיקרוסקופ המתאימה או ImageJ כדי לקבל רושם ראשוני חזותי של המדגם וק...

Watch this Scientific Journal Video about A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems at JoVE.com

A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

Assay bioreporter התא שלם עם sartisoli Burkholderia RP037-mChe פותח כדי לזהות שברים של מזהמים אורגניים (כלומר, fluorene) זמינים לשפלת חיידקים לאחר תחבורה פעילה על ידי mycelia גישור נקבוביות אוויר מלא במערכת מודל בלתי רוויה מים.

גישת Bioreporter תא כל להערכת תחבורה וזמינות ביולוגית של מזהמים אורגניים במערכות לא רוויים מים

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is ...

a-whole-cell-bioreporter-approach-to-assess-transport-bioavailability

Research

JoVE Journal

Environment

10.3K Views.  Helmholtz Centre for Environmental Research - UFZ.  Assay bioreporter התא שלם עם sartisoli Burkholderia RP037-mChe פותח כדי לזהות שברים של מזהמים אורגניים (כלומר, fluorene) זמינים לשפלת חיידקים לאחר תחבורה פעילה על ידי mycelia גישור נקבוביות אוויר מלא במערכת מודל בלתי רוויה מים. 

Video: A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

EPA Method 1615. Measurement of Enterovirus and Norovirus Occurrence in Water by Culture and RT-qPCR. I. Collection of Virus Samples

EPA Method 1615 was developed with a goal of providing a standard method for measuring enteroviruses and noroviruses in environmental and drinking waters. The standardized sampling component of the method concentrates viruses that may be present in water by passage of a minimum specified volume of water through an electropositive cartridge filter. The minimum specified volumes for surface and finished/ground water are 300 L and 1,500 L, respectively. A major method limitation is the tendency for the filters to clog before meeting the sample volume requirement. Studies using two different, but equivalent, cartridge filter options showed that filter clogging was a problem with 10% of the samples with one of the filter types compared to 6% with the other filter type. Clogging tends to increase with turbidity, but cannot be predicted based on turbidity measurements only. From a cost standpoint one of the filter options is preferable over the other, but the water quality and experience with the water system to be sampled should be taken into consideration in making filter selections.

EPA Method 1615 uses an electropositive filter to concentrate enteroviruses and noroviruses in environmental and drinking waters. This manuscript describes the procedure for collecting samples for Method 1615 analyses.

EPA שיטת המדידה של 1615. Enterovirus ומופע norovirus במים על ידי תרבות וRT-qPCR. I. איסוף דגימות וירוסים

EPA Method 1615 was developed with a goal of providing a standard method for measuring enteroviruses and noroviruses in environmental and drinking waters. ...

A Small Volume Bioassay to Assess Bacterial/Phytoplankton Co-culture Using WATER-Pulse-Amplitude-Modulated (WATER-PAM) Fluorometry

Conventional methods for experimental manipulation of microalgae have employed large volumes of culture (20 ml to 5 L), so that the culture can be subsampled throughout the experiment1&#8211;7. Subsampling of large volumes can be problematic for several reasons: 1) it causes variation in the total volume and the surface area:volume ratio of the culture during the experiment; 2) pseudo-replication (i.e., replicate samples from the same treatment flask8) is often employed rather than true replicates (i.e., sampling from replicate treatments); 3) the duration of the experiment is limited by the total volume; and 4) axenic cultures or the usual bacterial microbiota are difficult to maintain during long-term experiments as contamination commonly occurs during subsampling.
The use of microtiter plates enables 1 ml culture volumes to be used for each replicate, with up to 48 separate treatments within a 12.65 x 8.5 x 2.2 cm plate, thereby decreasing the experimental volume and allowing for extensive replication without subsampling any treatment. Additionally, this technique can be modified to fit a variety of experimental formats including: bacterial-algal co-cultures, algal physiology tests, and toxin screening9&#8211;11. Individual wells with an alga, bacterium and/or co-cultures can be sampled for numerous laboratory procedures including, but not limited to: WATER-Pulse-Amplitude-Modulated (WATER-PAM) fluorometry, microscopy, bacterial colony forming unit (cfu) counts and flow cytometry. The combination of the microtiter plate format and WATER-PAM fluorometry allows for multiple rapid measurements of photochemical yield and other photochemical parameters with low variability between samples, high reproducibility and avoids the many pitfalls of subsampling a carboy or conical flask over the course of an experiment.

A Small Volume Bioassay to Assess Bacterial/Phytoplankton Co-culture Using WATER-Pulse-Amplitude-Modulated WATER-PAM Fluorometry

The goal of this procedure is to demonstrate the reproducibility and adaptability of using a microtiter plate format for microalgal screening. This rapid screen combines WATER-Pulse-Amplitude-Modulated (WATER-PAM) fluorometry to measure photosynthetic yield as an indicator of Photosystem II (PSII) health with small volume bacterial-algal co-cultures.

מבדק נפח קטן להערכה בקטריאלי / הפיטופלנקטון Co-תרבות שימוש במים-Pulse-Amplitude-אופנן (WATER-PAM) Fluorometry

Conventional methods for experimental manipulation of microalgae have employed large volumes of culture (20 ml to 5 L), so that the culture can be ...

EPA Method 1615. Measurement of Enterovirus and Norovirus Occurrence in Water by Culture and RT-qPCR. Part III. Virus Detection by RT-qPCR

EPA Method 1615 measures enteroviruses and noroviruses present in environmental and drinking waters. This method was developed with the goal of having a standardized method for use in multiple analytical laboratories during monitoring period 3 of the Unregulated Contaminant Monitoring Rule. Herein we present the protocol for extraction of viral ribonucleic acid (RNA) from water sample concentrates and for quantitatively measuring enterovirus and norovirus concentrations using reverse transcription-quantitative PCR (RT-qPCR). Virus concentrations for the molecular assay are calculated in terms of genomic copies of viral RNA per liter based upon a standard curve. The method uses a number of quality controls to increase data quality and to reduce interlaboratory and intralaboratory variation. The method has been evaluated by examining virus recovery from ground and reagent grade waters seeded with poliovirus type 3 and murine norovirus as a surrogate for human noroviruses. Mean poliovirus recoveries were 20% in groundwaters and 44% in reagent grade water. Mean murine norovirus recoveries with the RT-qPCR assay were 30% in groundwaters and 4% in reagent grade water.

Here we present a procedure to quantify enterovirus and norovirus in environmental and drinking waters using reverse transcription-quantitative PCR. Mean virus recovery from groundwater with this standardized procedure from EPA Method 1615 was 20% for poliovirus and 30% for murine norovirus.

EPA שיטת המדידה של 1615. Enterovirus ומופע norovirus במים על ידי תרבות וRT-qPCR. חלק שלישי. איתור וירוסים על ידי RT-qPCR

EPA Method 1615 measures enteroviruses and noroviruses present in environmental and drinking waters. This method was developed with the goal of having a ...

Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations

Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled Earth-system processes. Such knowledge is imperative in improving predictions of hydro-biogeochemical cycles, especially under climate change scenarios. We present an experimental method, designed to capture sub-surface heterogeneity of an initially homogeneous soil system. This method is based on destructive sampling of a soil lysimeter designed to simulate a small-scale hillslope. A weighing lysimeter of one cubic meter capacity was divided into sections (voxels) and was excavated layer-by-layer, with sub samples being collected from each voxel. The excavation procedure was aimed at detecting the incipient heterogeneity of the system by focusing on the spatial assessment of hydrological, geochemical, and microbiological properties of the soil. Representative results of a few physicochemical variables tested show the development of heterogeneity. Additional work to test interactions between hydrological, geochemical, and microbiological signatures is planned to interpret the observed patterns. Our study also demonstrates the possibility of carrying out similar excavations in order to observe and quantify different aspects of soil-development under varying environmental conditions and scale.

This study presents an excavation method for investigating subsurface hydrological, geochemical, and microbiological heterogeneity of a soil lysimeter. The lysimeter simulates an artificial hillslope which was initially under homogeneous condition and had been subjected to approximately 5,000 mm of water over eight cycles of irrigation in an 18-month period.

חפירה באדמה Lysimeter עבור ההידרולוגי מצמידים, גיאוכימיות, וחקירות מיקרוביולוגיות

Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled ...

Implementation of Portable Emissions Measurement Systems (PEMS) for the Real-driving Emissions (RDE) Regulation in Europe

Vehicles are tested in controlled and relatively narrow laboratory conditions to determine their official emission values and reference fuel consumption. However, on the road, ambient and driving conditions can vary over a wide range, sometimes causing emissions to be higher than those measured in the laboratory. For this reason, the European Commission has developed a complementary Real-Driving Emissions (RDE) test procedure using the Portable Emissions Measurement Systems (PEMS) to verify gaseous pollutant and particle number emissions during a wide range of normal operating conditions on the road. This paper presents the newly-adopted RDE test procedure, differentiating six steps: 1) vehicle selection, 2) vehicle preparation, 3) trip design, 4) trip execution, 5) trip verification, and 6) calculation of emissions. Of these steps, vehicle preparation and trip execution are described in greater detail. Examples of trip verification and the calculations of emissions are given.

Implementation of Portable Emissions Measurement Systems PEMS for the Real-driving Emissions RDE Regulation in Europe

The European Commission has developed a Real-Driving Emissions (RDE) test procedure to verify pollutant emissions during real-world vehicle operation using the Portable Emissions Measurement Systems (PEMS). This paper presents the experimental procedures required by the newly-adopted RDE test.

יישום פליטות ניידים מדידה מערכות (PEMS) עבור פליטות Real-נהיגה (RDE) תקנה באירופה

Vehicles are tested in controlled and relatively narrow laboratory conditions to determine their official emission values and reference fuel consumption. ...

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff

Urban stormwater and agriculture irrigation runoff contain a complex mixture of contaminants that are often toxic to adjacent receiving waters. Runoff may be treated with simple systems designed to promote sorption of contaminants to vegetation and soils and promote infiltration. Two example systems are described: a bioswale treatment system for urban stormwater treatment, and a vegetated drainage ditch for treating agriculture irrigation runoff. Both have similar attributes that reduce contaminant loading in runoff: vegetation that results in sorption of the contaminants to the soil and plant surfaces, and water infiltration. These systems may also include the integration of granulated activated carbon as a polishing step to remove residual contaminants. Implementation of these systems in agriculture and urban watersheds requires system monitoring to verify treatment efficacy. This includes chemical monitoring for specific contaminants responsible for toxicity. The current paper emphasizes monitoring of current use pesticides since these are responsible for surface water toxicity to aquatic invertebrates.

This article summarizes the design attributes and the effectiveness of treatment systems that treat urban stormwater and agriculture irrigation runoff to remove pesticides and other contaminants associated with aquatic toxicity.

מערכות טיפול צמחי להסרת מזהמים המשויכים לרעלת פני המים בחקלאות ובנוף העירוני

Urban stormwater and agriculture irrigation runoff contain a complex mixture of contaminants that are often toxic to adjacent receiving waters. Runoff may ...

Measuring and Mapping Patterns of Soil Erosion and Deposition Related to Soil Carbonate Concentrations Under Agricultural Management

Spatial patterns of soil erosion and deposition can be inferred from differences in ground elevation mapped at appropriate time increments. Such changes in elevation are related to changes in near-surface soil carbonate (CaCO3) profiles. The objective is to describe a simple conceptual model and detailed protocol for repeatable field and laboratory measurements of these quantities. Here, accurate elevation is measured using a ground-based differential global positioning system (GPS); other data acquisition methods could be applied to the same basic method. Soil samples are collected from prescribed depth intervals and analyzed in the lab using an efficient and precise modified pressure-calcimeter method for quantitative analysis of inorganic carbon concentration. Standard statistical methods are applied to point data, and representative results show significant correlations between changes in soil surface layer CaCO3 and changes in elevation consistent with the conceptual model; CaCO3 generally decreased in depositional areas and increased in erosional areas. Maps are derived from point measurements of elevation and soil CaCO3 to aid analyses. A map of erosional and depositional patterns at the study site, a rain-fed winter wheat field cropped in alternating wheat-fallow strips, shows the interacting effects of water and wind erosion affected by management and topography. Alternative sampling methods and depth intervals are discussed and recommended for future work relating soil erosion and deposition to soil CaCO3.

Spatial patterns of soil erosion and deposition can be inferred from differences in ground elevation mapped at appropriate time increments. Such changes in elevation are related to changes in near-surface soil carbonates. Repeatable methods for field and laboratory measurements of these quantities and data analysis methods are described here.

מדידה ומיפוי דפוסים של סחף אדמה ומשקעים הקשורים אדמה ריכוזים קרבונט תחת ניהול חקלאיים

Spatial patterns of soil erosion and deposition can be inferred from differences in ground elevation mapped at appropriate time increments. Such changes ...

Improving Infrared Spectroscopy Characterization of Soil Organic Matter with Spectral Subtractions

Soil organic matter (SOM) underlies numerous soil processes and functions. Fourier transform infrared (FTIR) spectroscopy detects infrared-active organic bonds that constitute the organic component of soils. However, the relatively low organic matter content of soils (commonly &#60; 5% by mass) and absorbance overlap of mineral and organic functional groups in the mid-infrared (MIR) region (4,000-400 cm-1) engenders substantial interference by dominant mineral absorbances, challenging or even preventing interpretation of spectra for SOM characterization. Spectral subtractions, a post-hoc mathematical treatment of spectra, can reduce mineral interference and enhance resolution of spectral regions corresponding to organic functional groups by mathematically removing mineral absorbances. This requires a mineral-enriched reference spectrum, which can be empirically obtained for a given soil sample by removing SOM. The mineral-enriched reference spectrum is subtracted from the original (untreated) spectrum of the soil sample to produce a spectrum representing SOM absorbances. Common SOM removal methods include high-temperature combustion (&#39;ashing&#39;) and chemical oxidation. Selection of the SOM removal method carries two considerations: (1) the amount of SOM removed, and (2) absorbance artifacts in the mineral reference spectrum and thus the resulting subtraction spectrum. These potential issues can, and should, be identified and quantified in order to avoid fallacious or biased interpretations of spectra for organic functional group composition of SOM. Following SOM removal, the resulting mineral-enriched sample is used to collect a mineral reference spectrum. Several strategies exist to perform subtractions depending on the experimental goals and sample characteristics, most notably the determination of the subtraction factor. The resulting subtraction spectrum requires careful interpretation based on the aforementioned methodology. For many soil and other environmental samples containing substantial mineral components, subtractions have strong potential to improve FTIR spectroscopic characterization of organic matter composition.

SOM underlies many soil functions and processes, but its characterization by FTIR spectroscopy is often challenged by mineral interferences. The described method can increase the utility of SOM analysis by FTIR spectroscopy by subtracting mineral interferences in soil spectra using empirically obtained mineral reference spectra.

שיפור ספקטרוסקופית אינפרא אדום אפיון של חומר אורגני בקרקע עם המתחוללות ספקטרלי

Soil organic matter (SOM) underlies numerous soil processes and functions. Fourier transform infrared (FTIR) spectroscopy detects infrared-active organic ...

Single-throughput Complementary High-resolution Analytical Techniques for Characterizing Complex Natural Organic Matter Mixtures

Natural organic matter (NOM) is composed of a highly complex mixture of thousands of organic compounds which, historically, proved difficult to characterize. However, to understand the thermodynamic and kinetic controls on greenhouse gas (carbon dioxide [CO2] and methane [CH4]) production resulting from the decomposition of NOM, a molecular-level characterization coupled with microbial proteome analyses is necessary. Further, climate and environmental changes are expected to perturb natural ecosystems, potentially upsetting complex interactions that influence both the supply of organic matter substrates and the microorganisms performing the transformations. A detailed molecular characterization of the organic matter, microbial proteomics, and the pathways and transformations by which organic matter is decomposed will be necessary to predict the direction and magnitude of the effects of environmental changes. This article describes a methodological throughput for comprehensive metabolite characterization in a single sample by direct injection Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), gas chromatography mass spectrometry (GC-MS), nuclear magnetic resonance (NMR) spectroscopy, liquid chromatography mass spectrometry (LC-MS), and proteomics analysis. This approach results in a fully-paired dataset which improves statistical confidence for inferring pathways of organic matter decomposition, the resulting CO2 and CH4 production rates, and their responses to environmental perturbation. Herein we present results of applying this method to NOM samples collected from peatlands; however, the protocol is applicable to any NOM sample (e.g., peat, forested soils, marine sediments, etc.).

This protocol describes a single throughput for complementary analytical and omics techniques culminating in a fully-paired characterization of natural organic matter and microbial proteomics in different ecosystems. This approach permits robust comparisons for identifying metabolic pathways and transformations important for describing greenhouse gas production and predicting responses to environmental change.

יחיד-תפוקה משלימים שיטות אנליטיות ברזולוציה גבוהה עבור אפיון תערובות מורכבות חומר אורגני טבעי

Natural organic matter (NOM) is composed of a highly complex mixture of thousands of organic compounds which, historically, proved difficult to ...

Microplot Design and Plant and Soil Sample Preparation for 15Nitrogen Analysis

Many&#160;nitrogen fertilizer studies evaluate the overall effect of a treatment on end-of-season measurements such as grain yield or cumulative N losses. A stable isotope approach is necessary to follow and quantify the fate of fertilizer derived N (FDN) through the soil-crop system. The purpose of this paper is to describe a small-plot research&#160;design utilizing non-confined 15N enriched microplots for multiple soil and plant sampling events over two growing seasons and provide sample collection, handling, and processing protocols for total 15N analysis. The methods were demonstrated using a replicated study from south-central Minnesota planted to corn (Zea mays L.). Each treatment consisted of six corn rows (76 cm row-spacing) 15.2 m long with a microplot (2.4 m by 3.8 m) embedded at one end. Fertilizer-grade urea was applied at 135 kg N&#8729;ha-1 at planting, while the microplot received urea enriched to 5 atom % 15N. Soil and plant samples were taken several times throughout the growing season, taking care to minimize cross-contamination by using separate tools and physically separating unenriched and enriched samples during all procedures. Soil and plant samples were dried, ground to pass through a 2 mm screen, and then ground to a flour-like consistency using a roller jar mill. Tracer studies require additional planning, sample processing time and manual labor, and incur higher costs for 15N enriched materials and sample analysis than traditional N studies. However, using the mass balance approach, tracer studies with multiple in-season sampling events allow the researcher to estimate FDN distribution through the soil-crop system and estimate unaccounted-for FDN from the system.

Microplot Design and Plant and Soil Sample Preparation for 15Nitrogen Analysis

A microplot design for 15N tracer research is described to accommodate multiple in-season plant and soil sampling events. Soil and plant sample collection and processing procedures, including grinding and weighing protocols, for 15N analysis are put forth.

מיקרועלילה עיצוב וצמח הכנה לדגימת קרקע עבור 15ניתוח חנקן

Many&#160;nitrogen fertilizer studies evaluate the overall effect of a treatment on end-of-season measurements such as grain yield or cumulative N losses. ...