synthesis-thiol-building-block-for-crystallization-semiconducting

Synthesis of a Thiol Building Block for the Crystallization of a Semiconducting Gyroidal Metal-sulfur Framework

We present a method for preparing thioester molecules as the masked form of the thiol linkers and their utilization for accessing a semiconducting and ...

Guangdong University of Technology

A highly specific, distinct color change in the crystals of a metal-organic framework with pendant allyl thioether units in response to Pd species was discovered. The color change (from light yellow to orange/brick red) can be triggered by Pd species at concentrations of a few parts per million and points to the potential use of these crystals in colorimetric detection and quantification of Pd(II) ions. The swift color change is likely due to the combined effects of the multiple functions built into the porous framework: the carboxyl groups for bonding with Zn(II) ions to assemble the host network and the thioether and alkene functions for effective uptake of the Pd(II) analytes (e.g., via the alkene-Pd interaction). The resultant loading of Pd (and other noble metal) species into the porous solid also offers rich potential for catalysis applications, and the alkene side chains are amenable to wide-ranging chemical transformations (e.g., bromination and polymerization), enabling further functionalization of the porous networks.

Convenient detection of Pd(II) by a metal-organic framework with sulfur and olefin functions.

In this work, we report the preparation of a free-standing membrane with strong mechanical stability and flexibility through a facile vacuum filtration approach. A field-emission scanning electron microscopy image demonstrates that the membrane composed of MnO2 nanowires is 50 nm in width and up to 100 μm long and the nanowires are assembled in parallel into bundles. A possible formation mechanism for the ultralong nanowires and the free-standing membrane has been proposed. Meanwhile, the properties of the membrane could be controlled by incorporating different materials to achieve composite membranes. In order to demonstrate the broad applicability of the MnO2 membrane, we fabricate a variety of composite membranes exhibiting various novel properties including magnetism and reversibly switchable wettability between hydrophilicity and hydrophobicity through various material modification, including CoFe2O4 nanoparticles and organic triethoxy(octyl)silane. Furthermore, the free-standing membrane could also simultaneously be functionalized with two materials, which reveal multiple properties. The synthesis method of a free-standing MnO2 membrane is simple and environmentally friendly, and it is easily scalable for industry. These composite membranes constitute a significant contribution to advanced technology.

Multifunctional free-standing membrane from the self-assembly of ultralong MnO2 nanowires.

The major discovery here is a robust and water-stable metal-organic framework (MOF) material capable of reversible binding of the volatile and reactive molecules of ICl and I2. The immobilization of I2 and ICl, as well as their controllable release thus achieved, is to facilitate the wide-ranging applications of these volatile species as catalysts and reagents in chemical and industrial processes. The framework material TMBP·CuI (hereafter TCuI) can be conveniently prepared in quantitative yields by heating CuI and the organic linker TMBP (3,3',5,5'-tetramethyl-4,4'-bipyrazol) in acetonitrile. The microporous three-dimensional net of TCuI features CuI chains that contribute to efficient and reversible binding of ICl and I2 molecules, to result in the stoichiometrically well-defined adducts of TCuI·ICl and TCuI·I2, respectively. Moreover, the confinement of a volatile compound like ICl within the MOF medium provides unique opportunities to enhance its reactivity and selectivity as a chemical reagent, as is exemplified by the iodination reactions examined herein. With this exemplary study, we intend to stimulate interest in further exploring MOFs and other porous media (e.g., porous polymers) for entrapping ICl and other volatile reagents (e.g., Br2, SCl2, S2Cl2, and SOCl2) and for potentially novel reactivity associated with the porous medium.

Immobilization of volatile and corrosive iodine monochloride (ICl) and I(2) reagents in a stable metal-organic framework.

From a hydrothermal reaction using CuI, KI, and 3,3'5,5'-tetramethyl-4,4'-bipyrazole (TMBP), the triiodide anion I3(-) has been integrated into the water-stable 2D coordination polymer Cu(TMBP)I3 (1). In contrast with other metal triiodide complexes, 1 features remarkably small distortions in the bond distances associated with the I3(-) units (i.e., the Cu-I and I-I bonds), which effectively link up the copper(I) centers into infinite CuI3 chains. The electronic band gaps and electrical conductivity data are also found to be consistent with the I3(-) ion acting as an effective linker across the copper(I) centers.

Highly Polarizable Triiodide Anions (I3(-)) as Cross-Linkers for Coordination Polymers: Closing the Semiconductive Band Gap.

A new avenue for making porous frameworks has been developed by borrowing an idea from molecularly imprinted polymers (MIPs). In lieu of the small molecules commonly used as templates in MIPs, soft metal components, such as CuI, are used to orient the molecular linker and to leverage the formation of the network. Specifically, a linear dicarboxylate linker with thioether side groups reacted simultaneously with Ln(3+) ions and CuI, leading to a bimetallic net featuring strong, chemically hard Eu(3+) -carboxylate links, as well as soft, thioether-bound Cu2 I2 clusters. The CuI block imparts water stability to the host; with the tunable luminescence from the lanthanide ions, this creates the first white-emitting MOF that is stable in boiling water. The Cu2 I2 block also readily reacts with H2 S, and enables sensitive colorimetric detection while the host net remains intact.

A Boiling-Water-Stable, Tunable White-Emitting Metal-Organic Framework from Soft-Imprint Synthesis.

Recently, the emergence of conductive metal-organic frameworks (MOFs) has given great prospects for their applications as active materials in electronic devices. In this work, a high-quality, free-standing conductive MOF membrane was prepared by an air-liquid interfacial growth method. Accordingly, field-effect transistors (FETs) possessing a crystalline microporous MOF channel layer were successfully fabricated for the first time. The porous FETs exhibited p-type behavior, distinguishable on/off ratios, and excellent field-effect hole mobilities as high as 48.6 cmVs, which is even comparable to the highest value reported for solution-processed organic or inorganic FETs.

Porous Field-Effect Transistors Based on a Semiconductive Metal-Organic Framework.

We report the dramatic triggering of structural order in a Zr(IV)-based metal-organic framework (MOF) through docking of HgClguests. Although as-made crystals were unsuitable for single crystal X-ray diffraction (SCXRD), with diffraction limited to low angles well below atomic resolution due to intrinsic structural disorder, permeation of HgClnot only leaves the crystals intact but also resulted in fully resolved backbone as well as thioether side groups. The crystal structure revealed elaborate HgCl-thioether aggregates nested within the host octahedra to form a hierarchical, multifunctional net. The chelating thioether groups also promote Hg(II) removal from water, while the trapped Hg(II) can be easily extricated by 2-mercaptoethanol to reactivate the MOF sorbent.

Metalation Triggers Single Crystalline Order in a Porous Solid.

Copper (II) is one of the most of important cofactors for numerous enzymes and has captured broad attention due to its role as a neurotransmitters for physiological and pathological functions. In this article, we present a reaction-based fluorescent sensor for Cudetection (NIR-Cu) with near-infrared excitation and emission, including probe design, structure characterization, optical property test and biological imaging application. NIR-Cu is equipped with a functional group, 2-picolinic ester, which hydrolyzes in the presence of Cuwith high selectivity over completed cations. With the experimental conditions optimized, NIR-Cu (5μM) exhibits linear response for Curange from 0.1 to 5μM, with a detection limit of 29nM. NIR-Cu also shows excellent water solubility and are highly responsive, both desirable properties for Cudetection in water samples. In addition, due to its near-infrared excitation and emission properties, NIR-Cu demonstrates outstanding fluorescent imaging in living cells and tissues.

A reaction-based near-infrared fluorescent sensor for Cudetection in aqueous buffer and its application in living cells and tissues imaging.

Herein, a novel photoinitiated polymerization-induced self-assembly formulation via photoinitiated reversible addition-fragmentation chain transfer dispersion polymerization of glycidyl methacrylate (PGMA) in ethanol-water at room temperature is reported. It is demonstrated that conducting polymerization-induced self-assembly (PISA) at low temperatures is crucial for obtaining colloidal stable PGMA-based diblock copolymer nano-objects. Good control is maintained during the photo-PISA process with a high rate of polymerization. The polymerization can be switched between "ON" and "OFF" in response to visible light. A phase diagram is constructed by varying monomer concentration and degree of polymerization. The PGMA-based diblock copolymer nano-objects can be further cross-linked by using a bifunctional primary amine reagent. Finally, silver nanoparticles are loaded within cross-linked vesicles via in situ reduction, exhibiting good catalytic properties.

Photoinitiated Polymerization-Induced Self-Assembly of Glycidyl Methacrylate for the Synthesis of Epoxy-Functionalized Block Copolymer Nano-Objects.

Alkaline phosphatase (ALP) is a family of enzymes involved in the regulation of important biological processes such as cell differentiation and bone mineralization. Monitoring the activity of ALP in serum can help diagnose a variety of diseases including bone and liver diseases. There has been growing interest in developing new chemical tools for monitoring ALP activity in living systems. Such tools will help further delineate the roles of ALP in biological and pathological processes. Previously reported fluorescent probes has a number of disadvantages that limit their application, such as poor selectivity and short-wavelength excitation. In this work, we report a new two-photon fluorescent probe (TP-Phos) to selectively detect ALP activity. The probe is composed of a two-photon fluorophore, a phosphate recognition moiety, and a self-cleavable adaptor. It offers a number of advantages over previously reported probes, such as fast reaction kinetics, high sensitivity and low cytotoxicity. Experimental results also showed that TP-Phos displayed improved selectivity over DIFMUP, a commonly utilized ALP probe. The selectivity is attributed to the utilization of an ortho-functionalised phenyl phosphate group, which increases the steric hindrance of the probe and the active site of phosphatases. Moreover, the two-photon nature of the probe confers enhanced imaging properties such as increased penetration depth and lower tissue autofluorescence. TP-Phos was successfully used to image the endogenous ALP activity of hippocampus, kidney and liver tissues from rat.

Construction of an alkaline phosphatase-specific two-photon probe and its imaging application in living cells and tissues.

A facile fluorescent probe (NBD-DOP) has been developed to detect hypochlorous acid (HOCl) in this study. The probe consists of a NBD fluorophore and a dopamine moiety that reacts with HOCl specifically. The dopamine group quenches the fluorescence of NBD efficiently through a photoinduced electron transfer (PET) effect. Experimental data showed that NBD-DOP could detect HOCl with ultrafast response, high sensitivity and high selectivity in a wide pH range. The probe could also be used to detect the myeloperoxidase enzyme that produces HOCl. Moreover, NBD-DOP has been applied in the imaging of exogenous and endogenous HOCl in living cells by confocal fluorescence microscopy.

A fast-response fluorescent probe for hypochlorous acid detection and its application in exogenous and endogenous HOCl imaging of living cells.

Enzyme catalysis is a mild, efficient, and selective technique that has many applications in organic synthesis as well as polymer synthesis. Here, a novel enzyme-catalysis-induced reversible addition-fragmentation chain transfer (RAFT)-mediated dispersion polymerization for preparing AB diblock copolymer nano-objects with complex morphologies at room temperature is described. Taking advantage of the room-temperature feature, it is shown that pure, worm-like polymer nano-objects can be readily prepared by just monitoring the viscosity. Moreover, it is demonstrated that inorganic nanoparticles and proteins can be loaded in situ into vesicles by this method. Finally, a novel oxygen-tolerant RAFT-mediated dispersion polymerization initiated by enzyme cascade reaction that can be carried out in open vessels is developed. The enzyme-initiated RAFT dispersion polymerization provides a facile platform for the synthesis of various functional polymer nano-objects under mild conditions.

Jun He

School of Chemical Engineering and Light Industry

Guangdong University of Technology

Synthesis of a Thiol Building Block for the Crystallization of a Semiconducting Gyroidal Metal-sulfur Framework

Jun He

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}School of Chemical Engineering and Light Industry

Guangdong University of Technology

Synthesis of a Thiol Building Block for the Crystallization of a Semiconducting Gyroidal Metal-sulfur Framework

School of Chemical Engineering and Light Industry