fabrication-carbon-based-ionic-electromechanically-active-soft

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Ionic electromechanically active capacitive laminates are a type of smart material that move in response to electrical stimulation. Due to the soft, ...

University of Tartu

A force field has been developed for Li(2)SiF(6) for subsequent use in Molecular Dynamics (MD) simulations involving Li(+) and SiF(2-) (6) ions in a polymer electrolyte host. Both ab initio calculations and available empirical data have been used. The force field has been verified in simulations of the crystal structure of Li(2)SiF(6) in two different space groups: P321 and P3(-)m1. The use of MD simulation to assess the correct space group for Li(2)SiF(6) shows that it is probably P321.

Development of a force field for Li(2)SiF(6).

An artificial muscle composite material consisting of carbide derived carbon (CDC) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF(4)) ionic liquid was modeled using molecular dynamics (MD) simulations, in order to determine the molecular structural rearrangements causing actuation. CDC was represented as separate curved graphene-like flakes with charges of +2, 0 or -2 on each flake, with 24-27 aromatic rings each. The charge distribution in the flakes was determined by PM6 semi-empirical optimization. The pore size distribution of CDC and the density of the material were comparable to experimental data. Molecular structure analysis revealed a preferential parallel orientation for the cations over the negatively charged CDC surfaces, while cationic rotations and reorientations could be observed for positively charged CDC. Changes in the pore occupancy for each ionic type were observed for pore sizes between 4 and 7 Å, which, together with the replacement of large cations with smaller anions, could explain the volume decrease in the anodes (and, vice versa, the volume increase in the cathodes) in this type of actuator.

Molecular dynamics simulations of EMI-BF₄ in nanoporous carbon actuators.

We present a study of an electrical model of electromechanically active carbon-polymer composite (CPC) with carbide-derived carbon (CDC) electrodes. The major focus is on investigation of surface electrode behavior upon external bending of the material. We show that electrical impedance measured from the surface of the CDC-based CPC can be used to determine the curvature of the material and, hence, the tip displacement of a CPC laminate in a cantilever configuration. It is also shown that by measuring surface signals in the process of an actuator's work-cycle, we obtain a self-sensing collision-detecting CPC actuator that can be considered as a counterpart of biomimetic vibrissae.

Electrical model of a carbon-polymer composite (CPC) collision detector.

The electromechanically and mechano-electrically active three-layered laminate composed of a Nafion membrane, carbide-derived carbon-based electrodes, and a 1-ethyl-3-methylimidazolium trifluoromethanesulphonate ionic liquid electrolyte responds to humidity gradient and can therefore serve as a differential humidity sensor or an energy harvesting element. The hydrophilic nature of all constituents of the laminate promotes sorption and diffusion of water across the membrane, causing large volumetric effects. Diffusion of water and the formation of a hydration shell around the ionic groups reorient and dislocate the ionic liquid ions, which in turn induce the formation of an electric charge across the electrodes exposed to different levels of ambient humidity. The generated electric charge can be registered as a voltage or electric current between the electrodes. Furthermore, the supercapacitor-like properties of the laminate allow storage of the electric charge in the same laminate, where it was generated.

Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester.

Low-voltage stimuli-responsive actuators based on carbide-derived carbon (CDC) porous structures were demonstrated. Bending actuators showed a differential electromechanical response defined by the porosity of the CDC used in the electrode layer. Highly porous CDCs prepared from TiC (mainly microporous), B4C (micromesoporous), and Mo2C (mainly mesoporous) precursors were selected to demonstrate the influence of porosity parameters on the electromechanical performance of actuators. CDC-based bending-type actuators showed a porosity-driven displacement response over a frequency range of 200 to 0.005 Hz at an applied excitation voltage of ±2 V. The displacement response of the CDC actuators increased with an increasing number of mesopores in the electrode layer, and the generated strain of the bending actuators was proportional to the total porosity (micropores and mesopores) of the CDC. The modifiable electromechanical response that arises from the precise porosity control attained through tailoring the CDC architecture demonstrates that these actuators hold great promise for smart, low-voltage-driven actuation devices. 

Microporous and mesoporous carbide-derived carbons for strain modification of electromechanical actuators.

Ionic polymer-metal composites (IPMCs) have recently received tremendous interest as soft biomimetic actuators and sensors in various bioengineering and human affinity applications, such as artificial muscles and actuators, aquatic propulsors, robotic end-effectors, and active catheters. Main challenges in developing biomimetic actuators are the attainment of high strain and actuation force at low operating voltage. Here we first report a nanostructured electrode surface design for IPMC comprising platinum nanothorn assemblies with multiple sharp tips. The newly developed actuator with the nanostructured electrodes shows a new way to achieve highly enhanced electromechanical performance over existing flat-surfaced electrodes. We demonstrate that the formation and growth of the nanothorn assemblies at the electrode interface lead to a dramatic improvement (3- to 5-fold increase) in both actuation range and blocking force at low driving voltage (1-3 V). These advances are related to the highly capacitive properties of nanothorn assemblies, increasing significantly the charge transport during the actuation process. 

Nanothorn electrodes for ionic polymer-metal composite artificial muscles.

A large-scale effort was carried out to test the performance of seven types of ionic electroactive polymer (IEAP) actuators in space-hazardous environmental factors in laboratory conditions. The results substantiate that the IEAP materials are tolerant to long-term freezing and vacuum environments as well as ionizing Gamma-, X-ray, and UV radiation at the levels corresponding to low Earth orbit (LEO) conditions. The main aim of this material behaviour investigation is to understand and predict device service time for prolonged exposure to space environment. 

Ionic electroactive polymer artificial muscles in space applications.

This paper describes the classification and size-dictionary interpolation of the three-dimensional data obtained by a laser scanner to be used in a realistic virtual fitting room, where automatic activation of the chosen mannequin robot, while several mannequin robots of different genders and sizes are simultaneously connected to the same computer, is also considered to make it mimic the body shapes and sizes instantly. The classification process consists of two layers, dealing, respectively, with gender and size. The interpolation procedure tries to find out which set of the positions of the biologically inspired actuators for activation of the mannequin robots could lead to the closest possible resemblance of the shape of the body of the person having been scanned, through linearly mapping the distances between the subsequent size-templates and the corresponding position set of the bioengineered actuators, and subsequently, calculating the control measures that could maintain the same distance proportions, where minimizing the Euclidean distance between the size-dictionary template vectors and that of the desired body sizes determines the mathematical description. In this research work, the experimental results of the implementation of the proposed method on Fits.me's mannequin robots are visually illustrated, and explanation of the remaining steps toward completion of the whole realistic online fitting package is provided. 

Size-Dictionary Interpolation for Robot's Adjustment.

Rapid development of soft micromanipulation techniques for human friendly electronics has raised the demand for the devices to be able to carry out mechanical work on a micro- and macroscale. The natural cellulose-based ionogels (CEL-iGEL) hold a great potential for soft artificial muscle application, due to its flexibility, low driving voltage and biocompatibility. The CEL-iGEL composites undergo reversible bending already at ±500mV step-voltage values. A fast response to the voltage applied and high ionic conductivity of membranous actuator is achieved by a complete dissolution of cellulose in 1-ethyl-3-methylimidazolium acetate [EMIm][OAc]. The CEL-iGEL supported cellulose actuator films were cast out of cellulose-[EMIm][OAc] solution via phase inversion in HO. The facile preparation method ensured uniform morphology along the layers and stand for the high ionic-liquid loading in a porous cellulose scaffold. During the electromechanical characterization, the CEL-iGEL actuators showed exponential dependence to the voltage applied with the max strain difference values reaching up to 0.6% at 2 V. Electrochemical analysis confirmed the good stability of CEL-iGEL actuators and determined the safe working voltage value to be below 2.5V. To predict and estimate the deformation for various step input voltages, a mathematical model was proposed.

Natural cellulose ionogels for soft artificial muscles.

Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200 °C, 400 °C, 600 °C and 700 °C) during a time period of 10 min. We show that nanowires are especially prone to fragmentation around junctions and crossing points even at comparatively low temperatures. The fragmentation process is highly temperature dependent and the junction region breaks up at a lower temperature than a single nanowire. We develop a gold parametrization for kinetic Monte Carlo simulations and demonstrate the surface diffusion origin of the nanowire junction fragmentation. We show that nanowire fragmentation starts at the junctions with high reliability and propose that aligning nanowires in a regular grid could be used as a technique for fabricating arrays of nanodots.

Au nanowire junction breakup through surface atom diffusion.

The search for efficient energy storage devices has recently led to the introduction of a fluid electrode material employing electrochemical flow capacitors (EFC). Unlike the classical solid electrode film containing capacitors, where the electrode material is fixed to the current collectors and capacitance is therefore limited with an active surface area of porous electrode, the flow electrodes offer new design opportunities which enable fully continuous charging/discharging processes as well as easily scalable systems. Here we describe the successful incorporation of the carboxymethyl cellulose sodium salt (CMC-Na) assisted carbonaceous suspension electrode in aqueous media for the electrochemical flow capacitor concept and demonstrate the electrochemical charge storage in flowable electrodes using a cation conductive membrane as separator in a double-pipe flow-electrode module. Experimental results were combined with computer simulations (FEM) to specify limiting processes EFC charging. The flow-electrode slurry is based on 0.1 M NaSO, 3 wt% CMC-Na and activated carbon powder suspended in water. During continuous operation of the system, the capacitance of the flow electrode reached to 0.3 F/L providing the energy and current densities of 7 mWh/kg and 56 mW/L, respectively. Additionally, we report a 70% round trip efficiency calculated during charging and discharging of the cell between 0 V and +0.75 V, while applying the current density of 1.6 mA/kg. The double-pipe flow-electrode module is easily expandable for transportation of large volumes of electrode material.

Low concentrated carbonaceous suspensions assisted with carboxymethyl cellulose as electrode for electrochemical flow capacitor.

Mixing ionic liquids is a suitable strategy to tailor properties, e.g., to reduce melting points. The present study aims to widen the application range of low-toxic choline-based ionic liquids by studying eight binary phase diagrams of six different choline carboxylates. Five of them show eutectic points with melting points dropping by 13 to 45 °C. The eutectic mixtures of choline acetate and choline 2-methylbutarate were found to melt at 45 °C, which represents a remarkable melting point depression compared to the pure compounds with melting points of 81 (choline acetate) and 90 °C (choline 2-methylbutarate), respectively. Besides melting points, the thermal stabilities of the choline salt mixtures were investigated to define the thermal operation range for potential practical applications of these mixtures. Typical decomposition temperatures were found between 165 and 207 °C, with choline lactate exhibiting the highest thermal stability.

Alvo Aabloo

Intelligent Materials and Systems Lab,
Institute of Technology,
Intelligent Materials and Systems Lab, Institute of Technology

University of Tartu

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Alvo Aabloo

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Intelligent Materials and Systems Lab,Institute of Technology,Intelligent Materials and Systems Lab, Institute of Technology

University of Tartu

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Intelligent Materials and Systems Lab,
Institute of Technology,
Intelligent Materials and Systems Lab, Institute of Technology