Chapter 22
Shearing Stresses in Beams and Thin-Walled Members
Taglio sulla faccia orizzontale di un elemento trave
A prismatic beam's small element acted upon by vertical and horizontal shearing forces, along with normal forces, is considered for analyzing shear on ...
Distribuzione delle tensioni in una trave rettangolare stretta
An elemental section of a beam is considered to analyze the distribution of the stresses. The magnitude of the shearing force exerted on the horizontal ...
Sollecitazioni di taglio in una trave: risoluzione dei problemi
A cantilever beam with a rectangular cross-section is subjected to distributed and point loads.
To calculate shearing stress in the beam, the loads acting ...
Deformazioni plastiche
A cantilever beam, when subjected to a load at its free end, develops the maximum bending moment at its fixed end.
Until the bending moment surpasses the ...
Carico asimmetrico di aste a parete sottile
When thin-walled members with non-symmetrical cross-sections are subjected to unsymmetric loading, they experience bending and twisting.
This dual effect ...
Carico asimmetrico di aste a parete sottile: risoluzione dei problemi
Determine the shear center of the given channel section having a known uniform thickness, height, and width.
The first step in determining the shear ...
Personale delle biblioteche
Copyright © 2025 MyJoVE Corporation. Tutti i diritti riservati