February 1st, 2016
•This manuscript shows the fabrication process for the manufacture of dielectric elastomer soft actuators based on silicone membranes. The three key stages of production are presented in detail: blade casting of thin silicone membranes; pad printing of compliant electrodes; and the assembly of all the components.
Tags
Related Videos
The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids
Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions
Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale
Optical Trap Loading of Dielectric Microparticles In Air
Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes
Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies
Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers
Demonstration of Equal-Intensity Beam Generation by Dielectric Metasurfaces
Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots
Copyright © 2024 MyJoVE Corporation. 판권 소유