May 17th, 2018
•A new technique for applying consolidation pressure on the vacuum bag lay-up to fabricate composite laminates is described. The goal of this protocol is to develop a simple, cost-effective technique to improve the quality of laminates fabricated by the wet lay-up vacuum bag method.
Related Videos
Synthesis and Microdiffraction at Extreme Pressures and Temperatures
Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes
Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5
Studying Dynamic Processes of Nano-sized Objects in Liquid using Scanning Transmission Electron Microscopy
Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes
Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates
Operation of the Collaborative Composite Manufacturing (CCM) System
Using Flexible Gold-Titanium Reaction Cells to Simulate Pressure-Dependent Microbial Activity in the Context of Subsurface Biomining
Copyright © 2024 MyJoVE Corporation. 판권 소유