October 6th, 2017
•A protocol to expose bare fibers on the composite surface by eliminating resin rich area is presented. The fibers are exposed during fabrication of the composites, not by the post surface treatment. The exposed carbon composites exhibit high electrical conductivity in the through-thickness direction and high mechanical property.
Related Videos
Fabrication and Characterization of Disordered Polymer Optical Fibers for Transverse Anderson Localization of Light
Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System
Strain Sensing Based on Multiscale Composite Materials Reinforced with Graphene Nanoplatelets
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes
Operation of the Collaborative Composite Manufacturing (CCM) System
Fabrication of Surface Acoustic Wave Devices on Lithium Niobate
Solution Blow Spinning of Polymeric Nano-Composite Fibers for Personal Protective Equipment
Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing
Copyright © 2024 MyJoVE Corporation. 판권 소유