Name: one-pot microwave-assisted conversion of anomeric nitrate-esters to trichloroacetimidates
Uploaded: 2018-01-15T13:00:00.000+00:00
Duration: 6 min
Description: Watch this Scientific Journal Video about One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates at JoVE.com

The authors would like to acknowledge Vanderbilt University and the Institute of Chemical Biology for financial support. Mr. Berkley Ellis and Prof. John McLean are acknowledged for High-Resolution Mass Spectral Analysis. 
&#160;

1. Representative Microwave-Assisted Denitration
<ol>
	<li>Place the azido nitrate ester (1.0 equiv., 0.2 mmol) in an 8 mL microwave reaction vial. The scale of the reaction can be increased to several mmol without any adverse effect on reaction progress.</li>
	<li>Dissolve the azido-nitrate ester in 20% aq. acetone (0.1 M, 2.0 mL). Add pyridine (5.0 equiv., 0.08 mL, 1.0 mmol) to the reaction vessel. Cap the microwave irradiation vial and place the reaction vessel in a microwave reactor cavity.</li>
	<li>Irradiate the solution at 120 &#176;C for 15 min with stirring and with a fixed hold time. The hold time represents how long the irradiation will occur at the designated temperature and resultant pressure. Heat all reactions to the reported temperature over a 2-minute ramping period. Monitor the temperature by a builtin IR sensor.</li>
	<li>After 15 min, analyze the reaction mixture using thin layer chromatography (TLC) to confirm consumption of the starting material. Use 1:1 ethyl acetate/hexanes as the eluent.
	<ol>
		<li>Visualize the TLC plate using ceric ammonium molybate stain. The Rf of the reactant and product will vary, but the reducing alcohol is generally 0.05 to 0.1 lower Rf than the reactant.</li>
	</ol>
	</li>
</ol>
2. Formation of the trichloroacetimidate
<ol>
	<li>Following complete consumption of the starting material, evaporate the solvent to a reduced volume using an airline. Then, dilute with (dichloromethane) CH2Cl2 (1.0 mL) and use a syringe to remove the water layer. Once the water layer is removed, cool the reaction mixture to 0 &#176;C using an ice-water bath.</li>
	<li>Next, add DBU (10 eq, 0.3 mL, 1.9 mmol) and 2,2,2-trichloroacetonitrile (50 eq, 1.0 mL, 10 mmol) to the reaction vessel. Both reagents are added in excess and a minimum of 1 equivalent of base and 1 equivalent of 2,2,2-trichloroacetonitrile are needed.</li>
	<li>Allow the reaction mixture to stir while warming to ambient temperature. Monitor the reaction by TLC to confirm consumption of the starting material.
	<ol>
		<li>Use 1:1 ethyl acetate/hexanes as the eluent. Visualize the TLC plate using ceric ammonium molybate stain. The Rf of the reactant and product will vary.</li>
	</ol>
	</li>
	<li>After complete consumption of starting material, transfer the reaction mixture to a recovery flask and concentrate the mixture in vacuo at 30 &#176;C. Evaporation of solvent will provide a crude pale yellow to brown oil.</li>
	<li>Purify the crude product by silica gel column chromatography with a 1.5 cm chromatography column and 1:4 ethyl acetate/hexanes as eluent. The physical form of the imidate will vary from molecule to molecule.</li>
</ol>
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/56610/56610fig1v3.jpg" /> 
Figure 1. Representative examples of the one-pot conversion of 2-azido-1-nitrate esters to 2-azido-1-trichloroimidates. <a href="//cloudfront.jove.com/files/ftp_upload/56610/56610fig1v3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

<ol>
	<li>Nicolaou, K. C., Mitchell, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adventures+in+Carbohydrate+Chemistry:+New+Synthetic+Technologies,+Chemical+Synthesis,+Molecular+Design,+and+Chemical+Biology+A+list+of+abbreviations+can+be+found+at+the+end+of+this+article.+Telemachos+Charalambous+was+an+inspiring+teacher+at+the+Pancyprian+Gymnasium,+Nicosia,+Cyprus.">Adventures in Carbohydrate Chemistry: New Synthetic Technologies, Chemical Synthesis, Molecular Design, and Chemical Biology A list of abbreviations can be found at the end of this article. Telemachos Charalambous was an inspiring teacher at the Pancyprian Gymnasium, Nicosia, Cyprus.</a> Angew. Chem. Int. Ed. Engl. 40 (9), 1576-1624 (2001).</li><li>Danishefsky, S. J., Allen, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+the+laboratory+to+the+clinic:+A+retrospective+on+fully+synthetic+carbohydrate-based+anticancer+vaccines.">From the laboratory to the clinic: A retrospective on fully synthetic carbohydrate-based anticancer vaccines.</a> Angew. Chem. Int. Ed. Engl. 39 (5), 836-863 (2000).</li><li>Nicolaou, K. C., Hale, C. R. H., Nilewski, C., Ioannidou, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Constructing+molecular+complexity+and+diversity:+total+synthesis+of+natural+products+of+biological+and+medicinal+importance.">Constructing molecular complexity and diversity: total synthesis of natural products of biological and medicinal importance.</a> Chemical Society Reviews. 41 (15), 5185-5238 (2012).</li><li>Zhu, X., Schmidt, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+principles+for+glycoside-bond+formation.">New principles for glycoside-bond formation.</a> Angew. Chem. Int. Ed. Engl. 48 (11), 1900-1934 (2009).</li><li>Danishefsky, S. J., Bilodeau, M. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycals+in+organic+synthesis:+The+evolution+of+comprehensive+strategies+for+the+assembly+of+oligosaccharides+and+glycoconjugates+of+biological+consequence.">Glycals in organic synthesis: The evolution of comprehensive strategies for the assembly of oligosaccharides and glycoconjugates of biological consequence.</a> Angew. Chem. Int. Ed. Engl. 35 (13-14), 1380-1419 (1996).</li><li>Bongat, A. F., Demchenko, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+trends+in+the+synthesis+of+O-glycosides+of+2-amino-2-deoxysugars.">Recent trends in the synthesis of O-glycosides of 2-amino-2-deoxysugars.</a> Carbohydr. Res. 342 (3-4), 374-406 (2007).</li><li>Feizi, T., Fazio, F., Chai, W. C., Wong, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbohydrate+microarrays+-+a+new+set+of+technologies+at+the+frontiers+of+glycomics.">Carbohydrate microarrays - a new set of technologies at the frontiers of glycomics.</a> Curr. Opin. Struct. Biol. 13 (5), 637-645 (2003).</li><li>Palmacci, E. R., Plante, O. J., Seeberger, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oligosaccharide+synthesis+in+solution+and+on+solid+support+with+glycosyl+phosphates.">Oligosaccharide synthesis in solution and on solid support with glycosyl phosphates.</a> Eur. J. Org. Chem. (4), 595-606 (2002).</li><li>Stallforth, P., Lepenies, B., Adibekian, A., Seeberger, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=2009+Claude+S.+Hudson+Award+in+Carbohydrate+Chemistry.+Carbohydrates:+a+frontier+in+medicinal+chemistry.">2009 Claude S. Hudson Award in Carbohydrate Chemistry. Carbohydrates: a frontier in medicinal chemistry.</a> J. Med. Chem. 52 (18), 5561-5577 (2009).</li><li>Danishefsky, S. J., Mcclure, K. F., Randolph, J. T., Ruggeri, R. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Strategy+for+the+Solid-Phase+Synthesis+of+Oligosaccharides.">A Strategy for the Solid-Phase Synthesis of Oligosaccharides.</a> Science. 260 (5112), 1307-1309 (1993).</li><li>Demchenko, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stereoselective+chemical+1,2-cis+O-glycosylation:+From+'sugar+ray'+to+modern+techniques+of+the+21st+century.">Stereoselective chemical 1,2-cis O-glycosylation: From 'sugar ray' to modern techniques of the 21st century.</a> Synlett. (9), 1225-1240 (2003).</li><li>Fraserreid, B., Wu, Z. F., Udodong, U. E., Ottosson, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Armed-Disarmed+Effects+in+Glycosyl+Donors+-+Rationalization+and+Sidetracking.">Armed-Disarmed Effects in Glycosyl Donors - Rationalization and Sidetracking.</a> J. Org. Chem. 55 (25), 6068-6070 (1990).</li><li>Bohe, L., Crich, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+propos+of+glycosyl+cations+and+the+mechanism+of+chemical+glycosylation;+the+current+state+of+the+art.">A propos of glycosyl cations and the mechanism of chemical glycosylation; the current state of the art.</a> Carbohydr. Res. 403, 48-59 (2015).</li><li>Toshima, K., Tatsuta, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+Progress+in+O-Glycosylation+Methods+and+Its+Application+to+Natural-Products+Synthesis.">Recent Progress in O-Glycosylation Methods and Its Application to Natural-Products Synthesis.</a> Chem. Rev. 93 (4), 1503-1531 (1993).</li><li>Koenigs, W., Knorr, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ueber+einige+Derivate+des+Traubenzuckers+und+der+Galactose.">Ueber einige Derivate des Traubenzuckers und der Galactose.</a> Chem. Ber. 34 (1), 957-981 (1901).</li><li>Mukaiyama, T., Murai, Y., Shoda, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+Efficient+Method+for+Glucosylation+of+Hydroxy+Compounds+Using+Glucopyranosyl+Fluoride.">An Efficient Method for Glucosylation of Hydroxy Compounds Using Glucopyranosyl Fluoride.</a> Chem. Lett. (3), 431-432 (1981).</li><li>Meloncelli, P. J., Martin, A. D., Lowary, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycosyl+iodides.+History+and+recent+advances.">Glycosyl iodides. History and recent advances.</a> Carbohydrate Research. 344 (9), 1110-1122 (2009).</li><li>Lian, G., Zhang, X., Yu, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thioglycosides+in+carbohydrate+research.">Thioglycosides in carbohydrate research.</a> Carbohydr. Res. 403, 13-22 (2015).</li><li>Schmidt, R. R., Kinzy, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anomeric-Oxygen+Activation+for+Glycoside+Synthesis+-+the+Trichloroacetimidate+Method.">Anomeric-Oxygen Activation for Glycoside Synthesis - the Trichloroacetimidate Method.</a> Advances in Carbohydrate Chemistry and Biochemistry. 50, 21-123 (1994).</li><li>Schmidt, R. R., Toepfer, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glycosylation+with+highly+reactive+glycosyl+donors:+efficiency+of+the+inverse+procedure.">Glycosylation with highly reactive glycosyl donors: efficiency of the inverse procedure.</a> Tetrahedron Lett. 32 (28), 3353-3356 (1991).</li><li>Keith, D. J., Townsend, S. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct,+microwave-assisted+substitution+of+anomeric+nitrate-esters.">Direct, microwave-assisted substitution of anomeric nitrate-esters.</a> Carbohydr. Res. 442, 20-24 (2017).</li><li>Bukowski, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+Conformational+Analysis+of+the+T-Antigen+Disaccharide(B-D-Gal-(1->3)-a-D-GalNAc-OMe).">Synthesis and Conformational Analysis of the T-Antigen Disaccharide(B-D-Gal-(1->3)-a-D-GalNAc-OMe).</a> Eur. J. Org. Chem. 14, 2697-2705 (2001).</li></ol>

The authors have no competing financial interests.

The protocol described in this tutorial provides a method to convert nitrate esters to useful, reactive functionality. In a broader sense, employing a microwave reactor to complete specific maneuvers over the course of a carbohydrate synthesis has the potential to make difficult transformations facile and routine. Our goal in this tutorial is to demonstrate how to handle carbohydrates in the context of microwave irradiation.
In the case of the parent reaction, previous efforts to achieve denit...

Due to their ubiquity in molecular biology, carbohydrates have been longstanding targets for chemical synthesis.1,2,3 At the core of any successful synthetic campaign is the correct deployment of glycosylation reactions to build the oligosaccharide chain.4,5,6,7,8,9,10,11,12 Not surprisingly, there are a large number of methods to install glycosidic bonds.13,14 The Koenigs-Knorr method is one of the earliest known procedures and involves coupling a glycosyl chloride or bromide with an alcoholic component, usually under heavy metal (mercury or silver) activation.15 Related glycosyl fluorides were first introduced as donors in 1981 by the Mukaiyama group and have found widespread application due to their increased thermal and chemical stability.16 On the opposite end of the reactivity spectrum are glycosyl iodides, which are far more reactive than the other halides. Increased reactivity is accompanied by increased stereocontrol, particularly when forming &#945;-linked oligosaccharides.17 In addition to &#34;haloglycosides&#34;, thioglycosides have found wide utility, in part, due to their ease of formation, stability to a multitude of reaction conditions, and activation with electrophilic reagents.18
The methods described above focus on converting an anomeric alcohol to a &#34;non-oxygen&#34; containing, latent leaving group that is activated and ultimately displaced by an alcohol from an acceptor molecule. Anomeric oxygen activation as described by the Schmidt school, focuses on converting the C1 oxygen itself, to a leaving group.19 This method is the most powerful and widely used in chemical glycosylation reactions. Trichloroacetimidate donors are readily prepared from a reducing sugar and trichloroacetonitrile in the presence of a base such as potassium carbonate (K2CO3) or 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). These species are then activated using Lewis acids.20
Recently, we have reported that 2-azido-1-trichloroacetimidate donors can be directly prepared from glycals. The process involves a two reaction, one-pot procedure from 2-azido-1-nitrate esters.21 This detailed protocol is intended to assist practitioners in successfully completing the transformation in high yield. Of particular interest is the first step of the sequence, which focuses on thermal denitration under microwave- assisted heating. We also hope to provide a visual tutorial on employing microwave reactors in organic synthesis.

<table><tbody><tr><td>230 400 mesh silica gel</td><td>SiliCycle Inc</td><td>R10030B</td><td></td></tr><tr><td>TLC plates</td><td>SiliCycle Inc</td><td>TLG-R10014B-527</td><td></td></tr><tr><td>Ceric ammonium molybdate</td><td>Sigma-Aldrich</td><td>A1343</td><td></td></tr><tr><td>Solvent Still</td><td>Mbraun</td><td>MB-SPS-800</td><td></td></tr><tr><td>Infared spectrometer</td><td>Thermo</td><td>Thermo Electron IR100</td><td></td></tr><tr><td>Nuclear Magnetic Resonance</td><td>Bruker</td><td></td><td>400, 600 MHz</td></tr><tr><td>LC/MS</td><td>Thermo/Dionex</td><td></td><td>Single quad, ESI</td></tr><tr><td>HRMS</td><td>Agilent</td><td>Synapt G2 S HDMS</td><td></td></tr><tr><td>Microwave reactor</td><td>Anton Parr</td><td>Anton Parr G10 Monowave 200</td><td></td></tr><tr><td>DBU</td><td>Sigma-Aldrich</td><td>139009</td><td></td></tr><tr><td>CCl&lt;sub&gt;3&lt;/sub&gt;CN</td><td>Sigma-Aldrich</td><td>T53805</td><td></td></tr><tr><td>Pyridine</td><td>Sigma-Aldrich</td><td>270970</td><td></td></tr><tr><td>Acetone</td><td>Fisher Scientific</td><td>A18-20</td><td>Tech. grade</td></tr><tr><td>Phase separator</td><td>Biotage</td><td>120-1901-A</td><td></td></tr><tr><td>Rotary evaporator</td><td>Buchi</td><td>R-100</td><td></td></tr></tbody></table>

one-pot microwave-assisted conversion of anomeric nitrate-esters to trichloroacetimidates

The goal of the following procedure is to provide a demonstration of the one-pot conversion of a 2-azido-1-nitrate-ester to a trichloroacetimidate glycosyl donor. Following azido-nitration of a glycal, the product 2-azido-1-nitrate ester can be hydrolyzed under microwave-assisted irradiation. This transformation is usually achieved using strongly nucleophilic reagents and extended reaction times. Microwave irradiation induces hydrolysis, in the absence of reagents, with short reaction times. Following denitration, the intermediate anomeric alcohol is converted, in the same pot, to the corresponding 2-azido-1-trichloroacetimidate.

The technology described herein was demonstrated on a pool of three 2-azido-1-nitrate esters. In each case the first step of the reaction was complete within 20 minutes.
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/56610/56610fig2v3.jpg" /> 
Figure 2. Representative example of hydrolysis (1 -&#62;2), and one-pot conversion of 2-azido-1-nitrate ester of <strong...

Watch this Scientific Journal Video about One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates at JoVE.com

One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates

A 2-azido-1-nitrate-ester can be converted to the corresponding 2-azido-1-trichloroacetimidate in a one-pot procedure. The goal of the manuscript is to demonstrate utility of the microwave reactor in carbohydrate synthesis.

The goal of the following procedure is to provide a demonstration of the one-pot conversion of a 2-azido-1-nitrate-ester to a trichloroacetimidate ...

one-pot-microwave-assisted-conversion-anomeric-nitrate-esters-to

Research

JoVE Journal

Chemistry

7.4K Views.  Vanderbilt University. Een 2-azido-1-nitraat-ester kan worden geconverteerd naar de corresponderende 2-azido-1-trichloroacetimidate in een één-pot-procedure. Het doel van het manuscript is om aan te tonen van de nut van de reactor van de magnetron in de synthese van de koolhydraten.

Video: One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates

Synthesis of Antiviral Tetrahydrocarbazole Derivatives by Photochemical and Acid-catalyzed C-H Functionalization via Intermediate Peroxides (CHIPS)

The direct functionalization of C-H bonds is an important and long standing goal in organic chemistry. Such transformations can be very powerful in order to streamline synthesis by saving steps, time and material compared to conventional methods that require the introduction and removal of activating or directing groups. Therefore, the functionalization of C-H bonds is also attractive for green chemistry. Under oxidative conditions, two C-H bonds or one C-H and one heteroatom-H bond can be transformed to C-C and C-heteroatom bonds, respectively. Often these oxidative coupling reactions require synthetic oxidants, expensive catalysts or high temperatures. Here, we describe a two-step procedure to functionalize indole derivatives, more specifically tetrahydrocarbazoles, by C-H amination using only elemental oxygen as oxidant. The reaction uses the principle of C-H functionalization via Intermediate PeroxideS (CHIPS). In the first step, a hydroperoxide is generated oxidatively using visible light, a photosensitizer and elemental oxygen. In the second step, the N-nucleophile, an aniline, is introduced by Br&#248;nsted-acid catalyzed activation of the hydroperoxide leaving group. The products of the first and second step often precipitate and can be conveniently filtered off. The synthesis of a biologically active compound is shown.

Synthesis of Antiviral Tetrahydrocarbazole Derivatives by Photochemical and Acid-catalyzed C-H Functionalization via Intermediate Peroxides CHIPS

A two-step procedure for the synthesis of pharmaceutically active indole-derivatives by C-H functionalization with anilines is described, using photo- and Br&#248;nsted acid catalysis.

The direct functionalization of C-H bonds is an important and long standing goal in organic chemistry. Such transformations can be very powerful in order ...

Highly Stereoselective Synthesis of 1,6-Ketoesters Mediated by Ionic Liquids: A Three-component Reaction Enabling Rapid Access to a New Class of Low Molecular Weight Gelators

In organic chemistry ionic liquids (ILs) have emerged as safe and recyclable reaction solvents. In the presence of a base ILs can be deprotonated to form catalytically active N-Heterocyclic Carbenes (NHCs). Here we have used ILs as precatalysts in the addition of &#945;,&#946;-unsaturated aldehydes to chalcones to form 1,6-ketoesters, incorporating an anti-diphenyl moiety in a highly stereoselective fashion. The reaction has a broad substrate scope and several functional groups and heteroaromatics can be integrated into the ketoester backbone in generally good yields with maintained stereoselectivity. The reaction protocol is robust and scalable. The starting materials are inexpensive and the products can be obtained after simple filtration, avoiding solvent-demanding chromatography. Furthermore, the IL can be recycled up to 5 times without any loss of reactivity. Moreover, the 1,6-ketoester end product is a potent gelator in several hydrocarbon based solvents. The method enables rapid access to and evaluation of a new class of low molecular weight gelators (LMWGs) from recyclable and inexpensive starting materials.

Ionic liquids (ILs) mediate fast, simple and cheap access to 1,6-ketoesters in high diastereoselectivities and good yields. The reaction protocol is robust and the 1,6-ketoesters can be obtained in gram scale after a simple filtration protocol. Moreover, the 1,6-ketoesters are potent gelators in hydrocarbon solvents.

In organic chemistry ionic liquids (ILs) have emerged as safe and recyclable reaction solvents. In the presence of a base ILs can be deprotonated to form ...

Protocol for the Synthesis of Ortho-trifluoromethoxylated Aniline Derivatives

Molecules bearing trifluoromethoxy (OCF3) group often show desired pharmacological and biological properties. However, facile synthesis of trifluoromethoxylated aromatic compounds remains a formidable challenge in organic synthesis. Conventional approaches often suffer from poor substrate scope, or require use of highly toxic, difficult-to-handle, and/or thermally labile reagents. Herein, we report a user-friendly protocol for the synthesis of methyl 4-acetamido-3-(trifluoromethoxy)benzoate using 1-trifluoromethyl-1,2-benziodoxol-3(1H)-one (Togni reagent II). Treating methyl 4-(N-hydroxyacetamido)benzoate (1a) with Togni reagent II in the presence of a catalytic amount of cesium carbonate (Cs2CO3) in chloroform at RT afforded methyl 4-(N-(trifluoromethoxy)acetamido)benzoate (2a). This intermediate was then converted to the final product methyl 4-acetamido-3-(trifluoromethoxy)benzoate (3a) in nitromethane at 120 &#176;C. This procedure is general and can be applied to the synthesis of a broad spectrum of ortho-trifluoromethoxylated aniline derivatives, which could serve as useful synthetic building blocks for the discovery and development of new pharmaceuticals, agrochemicals, and functional materials.

Protocol for the Synthesis of Ortho-trifluoromethoxylated Aniline Derivatives

An operationally simple procedure for the synthesis of ortho-trifluoromethoxylated aniline derivatives via a two-step sequence of O-trifluoromethylation of N-aryl-N-hydroxyacetamide followed by thermally induced intramolecular OCF3-migration is reported.

Molecules bearing trifluoromethoxy (OCF3) group often show desired pharmacological and biological properties. However, facile synthesis of ...

Facile Preparation of (2Z,4E)-Dienamides by the Olefination of Electron-deficient Alkenes with Allyl Acetate

Direct cross-coupling between two alkenes via vinylic C-H bond activation represents an efficient strategy for the synthesis of butadienes with high atomic and step economy. However, this functionality-directed cross-coupling reaction has not been developed, as there are still limited directing groups in practical use. In particular, a stoichiometric amount of oxidant is usually required, producing a large amount of waste. Due to our interest in novel 1,3-butadiene synthesis, we describe the ruthenium-catalyzed olefination of electron-deficient alkenes using allyl acetate and without external oxidant. The reaction of 2-phenyl acrylamide and allyl acetate was chosen as a model reaction, and the desired diene product was obtained in 80% isolated yield with good stereoselectivity (Z,E/Z,Z = 88:12) under optimal conditions: [Ru(p-cymene) Cl2]2 (3 mol %) and AgSbF6 (20 mol %) in DCE at 110 &#186;C for 16 h. With the optimized catalytic conditions in hand, representative &#945;- and/or &#946;-substituted acrylamides were investigated, and all reacted smoothly, regardless of aliphatic or aromatic groups. Also, differently N-substituted acrylamides have proven to be good substrates. Moreover, we examined the reactivity of different allyl derivatives, suggesting that the chelation of acetate oxygen to the metal is crucial for the catalytic process. Deuterium-labeled experiments were also conducted to investigate the reaction mechanism. Only Z-selective H/D exchanges on acrylamide were observed, indicating a reversible cyclometalation event. In addition, a kinetic isotope effect (KIE) of 3.2 was observed in the intermolecular isotopic study, suggesting that the olefinic C-H metalation step is probably involved in the rate-determining step.

Facile Preparation of 2Z,4E-Dienamides by the Olefination of Electron-deficient Alkenes with Allyl Acetate

The ruthenium-catalyzed olefination of electron-deficient alkenes with allyl acetate is described here. By using aminocarbonyl as a directing group, this external oxidant-free protocol has high efficiency and good stereo- and regioselectivity, opening a novel synthetic route to (Z,E)-butadiene skeletons.

Direct cross-coupling between two alkenes via vinylic C-H bond activation represents an efficient strategy for the synthesis of butadienes with high ...

Preparation of N-(2-alkoxyvinyl)sulfonamides from N-tosyl-1,2,3-triazoles and Subsequent Conversion to Substituted Phthalans and Phenethylamines

Decomposition of N-tosyl-1,2,3-triazoles with rhodium(II) acetate dimer in the presence of alcohols forms synthetically versatile N-(2-alkoxyvinyl)sulfonamides, which react under a variety of conditions to afford useful N- and O-containing compounds. Acid-catalyzed addition of alcohols or thiols to N-(2-alkoxyvinyl)sulfonamide-containing phthalans provides access to ketals and thioketals, respectively. Selective reduction of the vinyl group in N-(2-alkoxyvinyl)sulfonamide-containing phthalans via hydrogenation yields the corresponding phthalan in good yield, whereas reduction with sodium bis(2-methoxyethoxy)aluminumhydride generates a ring-opened phenethylamine analogue. Because the N-(2-alkoxyvinyl)sulfonamide functional group is synthetically versatile, but often hydrolytically unstable, this protocol emphasizes key techniques in preparing, handling, and reacting these pivotal substrates in several useful transformations.

Preparation of N-2-alkoxyvinylsulfonamides from N-tosyl-1,2,3-triazoles and Subsequent Conversion to Substituted Phthalans and Phenethylamines

Representative experimental procedures for the synthesis of N-(2-alkoxyvinyl)sulfonamides and subsequent conversion to phthalan and phenethylamine derivatives are presented in detail.

Decomposition of N-tosyl-1,2,3-triazoles with rhodium(II) acetate dimer in the presence of alcohols forms synthetically versatile ...

Efficient Synthesis of All-Carbon Quaternary Centers via the Conjugate Addition of Functionalized Monoorganozinc Bromides

The conjugate addition of organometallic reagents to &#945;,&#946;-unsaturated carbonyls represents an important method to generate C&#8211;C bonds in the preparation of all-carbon quaternary centers. Though conjugate additions of organometallic reagents are typically performed utilizing highly reactive organolithium or Grignard reagents, organozinc reagents have garnered attention for their enhanced chemoselectivity and mild reactivity. Despite numerous recent advances with more reactive diorganozinc and mixed diorganozinc reagents, the generation of all-carbon quaternary centers via the conjugate addition of functionalized monoorganozinc reagents remains a challenge. This protocol details a convenient and mild &#8220;one-pot&#8221; preparation and copper mediated conjugate addition of functionalized monoorganozinc bromides to cyclic &#945;,&#946;-unsaturated carbonyls to afford a broad scope of all-carbon quaternary centers in generally excellent yield and diastereoselectivity. Key to the development of this technology is the utilization of DMA as a reaction solvent with TMSCl as a Lewis acid. Notable advantages to this methodology include the operational simplicity of the organozinc reagent preparation afforded by the utilization of DMA as a solvent, as well as an efficient conjugate addition mediated by various Cu(I) and Cu(II) salts. Moreover, an intermediate silyl enol ether can be isolated utilizing a modified workup procedure. The substrate scope is limited to cyclic unsaturated ketones, and the conjugate addition is impeded by stabilized (e.g., allyl, enolate, homoenolate) and sterically encumbered (e.g., neopentyl, o-aryl) monoorganozinc reagents. Conjugate additions to five- and seven-membered rings were effective, albeit in lower yields compared with six-membered ring substrates.

A simple and practical protocol for the efficient conjugate addition of functionalized monoorganozinc bromides to cyclic &#945;,&#946;-unsaturated carbonyls to furnish all-carbon quaternary centers was developed.

The conjugate addition of organometallic reagents to &#945;,&#946;-unsaturated carbonyls represents an important method to generate C&#8211;C bonds in the ...

Microwave-Assisted Preparation of 1-Aryl-1H-pyrazole-5-amines

A synthetic process for the preparation of a variety of 1-aryl-1H-pyrazole-5-amines was developed. The microwave-mediated nature of this method makes it efficient in both time and resources and utilizes water as the solvent. 3-Aminocrotononitrile or an appropriate &#945;-cyanoketone is combined with an aryl hydrazine and dissolved in 1 M HCl. The mixture is then heated in a microwave reactor at 150 &#176;C, typically for 10-15 min. The product can be readily obtained by basifying the solution with 10% NaOH and isolating the desired compound with a simple vacuum filtration. The use of water as a solvent in this reaction lends to its ease and utility in production, and this method is easily reproducible with a variety of functional groups. Typical isolated yields range from 70-90%, and reactions can be performed on the milligram to gram scale with little to no change in observed yields. Some of the applications of these molecules and their derivatives include pesticides, anti-malarials, and chemotherapeutics, among many others.

Microwave-Assisted Preparation of 1-Aryl-1H-pyrazole-5-amines

1-Aryl-1H-pyrazole-5-amines are prepared from aryl hydrazines combined with either 3-aminocrotononitrile or an &#945;-cyanoketone in a 1 M HCl solution using a microwave reactor. Most reactions are done in 10-15 minutes and pure product can be obtained via vacuum filtration with typical isolated yields of 70-90%.

A synthetic process for the preparation of a variety of 1-aryl-1H-pyrazole-5-amines was developed. The microwave-mediated nature of this method makes it ...

Preparation of 6-aminocyclohepta-2,4-dien-1-one Derivatives via Tricarbonyl(tropone)iron

aza-Michael adducts of tricarbonyl(tropone)iron are synthesized by two different methods. Primary aliphatic amines and cyclic secondary amines participate in a direct aza-Michael reaction with tricarbonyl(tropone)iron under solvent-free conditions. Less nucleophilic aniline derivatives and more hindered secondary amines add efficiently to the cationic tropone complex formed by protonation of tricarbonyl(tropone)iron. While the protocol utilizing the cationic complex is less efficient overall for accessing the aza-Michael adducts than the direct, solvent-free addition to the neutral complex, it allows the use of a broader range of amine nucleophiles. Following protection of the amine of the aza-Michael adduct as a tert-butyl carbamate, the diene is decomplexed from the iron tricarbonyl fragment upon treatment with cerium(IV) ammonium nitrate to provide derivatives of 6-aminocyclohepta-2,4-dien-1-one. These products can serve as precursors to diverse compounds containing a seven-membered carbocyclic ring. Because the demetallation requires protection of the amine as a carbamate, the aza-Michael adducts of secondary amines cannot be decomplexed using the protocol described here.

Preparation of 6-aminocyclohepta-2,4-dien-1-one Derivatives via Tricarbonyltroponeiron

Representative experimental procedures for the addition of amine nucleophiles to tricarbonyl(tropone)iron and subsequent demetallation of the resulting complexes are presented in detail.

aza-Michael adducts of tricarbonyl(tropone)iron are synthesized by two different methods. Primary aliphatic amines and cyclic secondary amines participate ...

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy

CO2 transformations using a one-pot two-step method are presented herein. The purpose of the method is to give access to a variety of value-added products and notably to generate chiral carbon centers. The crucial first step consists in the selective double hydroboration of CO2 catalyzed by an iron hydride complex. The product obtained with this 4 e- reduction is a rare bis(boryl)acetal, compound 1, which is subjected in situ to three different reactions in a second step. The first reaction concerns a condensation reaction with (diisopropyl)phenylamine affording the corresponding imine 2. In the second and third reaction, intermediate 1 reacts with triazol-5-ylidene (Enders&#39; carbene) to afford compounds 3 or 4, depending on the reaction conditions. In both compounds, C-C bonds are formed, and chiral centers are generated from CO2 as the only source of carbon. Compound 4 exhibits two chiral centers obtained in a diastereoselective manner in a formose-type mechanism. We proved that the remaining boryl fragment plays a key role in this unprecedented stereocontrol. The interest of the method stands on the reactive and versatile nature of 1, giving rise to various complex molecules from a single intermediate. The complexity of a two-step method is compensated by the overall short reaction time (2 h for the larger reaction time), and mild reaction conditions (25 &#176;C to 80 &#176;C and 1 to 3 atm of CO2).

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy

CO2 transformations are conducted in a one-pot two-step procedure for the synthesis of complex molecules. The selective 4 e- reduction of CO2 with a hydroborane reductant affords a reactive and versatile bis(boryl)acetal intermediate which is subsequently involved in condensation reaction or carbene-mediated C-C coupling generation.

CO2 transformations using a one-pot two-step method are presented herein. The purpose of the method is to give access to a variety of value-added products ...

A Microwave-Assisted Direct Heteroarylation of Ketones Using Transition Metal Catalysis

Heteroarylation introduces heteroaryl fragments to organic molecules. Despite the numerous available reactions reported for arylation via transition metal catalysis, the literature on direct heteroarylation is scarce. The presence of heteroatoms such as nitrogen, sulfur and oxygen often make heteroarylation a challenging research field due to catalyst poisoning, product decomposition and the rest. This protocol details a highly efficient direct &#945;-C(sp3) heteroarylation of ketones under microwave irradiation. Key factors for successful heteroarylation include the use of XPhos Palladacycle Gen. 4 Catalyst, excess base to suppress side reactions and the high temperature and pressure achieved in a sealed reaction vial under microwave irradiation. The heteroarylation compounds prepared by this method were fully characterized by proton nuclear magnetic resonance spectroscopy (1H NMR), carbon nuclear magnetic resonance spectroscopy (13C NMR) and high-resolution mass spectrometry (HRMS). This methodology has several advantages over literature precedents including broad substrate scope, rapid reaction time, greener procedure and operational simplicity by eliminating the preparation of intermediates such as silyl enol ether. Possible applications for this protocol include, but are not limited to, diversity-oriented synthesis for the discovery of biologically active small molecules, domino synthesis for the preparation of natural products and ligand development for new transition metal catalytic systems.

Heteroaryl compounds are important molecules utilized in organic synthesis, medicinal and biological chemistry. A microwave-assisted heteroarylation using palladium catalysis provides a rapid and efficient method to attach heteroaryl moieties directly to ketone substrates.

Heteroarylation introduces heteroaryl fragments to organic molecules. Despite the numerous available reactions reported for arylation via transition metal ...

One-pot Microwave-assisted Conversion of Anomeric Nitrate-esters to Trichloroacetimidates

Samenvatting

Meer video's verkennen

Hoofdstukken in deze video