RK and RRG were supported by a grant from the UNM Center for Metals in Biology and Medicine (CMBM) through NIH NIGMS grant P20 GM130422. RRG was supported by a pilot award from the NM-INSPIRES P30 grant 1P30ES032755. The imaging core support for the CX7 Cellomics instrument was provided through the AIM center cores funded by NIH grant P20GM121176.&#160;We would like to thank Dr. Sharina Desai and Dr. Li Chen for their invaluable assistance with technical issues related to the use of the CX7 Cellomics imaging platform.

1. Cell culture
<ol>
	<li>Seed the test cells (HepG2, HUH7, and JHH4 hepatocellular carcinoma cells) into a 96-well plate at a seeding density of 10,000 cells/well in a final seeding volume of 200 &#181;L per well.
	<ol>
		<li>Before culturing the HepG2 cells, coat the 96 plate wells with type IV collagen (50 &#181;g/mL) for 2 h duration at room temperature (RT). To avoid solidification of the stock collagen, place the stock solution into ice and subsequently, initiate the dilution process to the desired concentration.</li>
		<li>After a 2 h incubation period, aspirate off the excess collagen and wash the wells three times with the 1x PBS.</li>
	</ol>
	</li>
	<li>Cultivate the cells in Dulbecco&#39;s modified Eagle medium (DMEM) overnight at 37 &#176;C and 5% CO2 concentration in a humidified incubator.</li>
	<li>Next day, or upon reaching the 80%-90% confluency, whichever is earlier, treat the cells with H2O2&#160;(untreated, 250 &#181;M, 500 &#181;M, 750 &#181;M, and 1000 &#181;M) and Menadione (untreated, 25 &#181;M, 50 &#181;M, 75 &#181;M, 100 &#181;M), respectively for 30 min to induce the representative oxidative stress.</li>
	<li>Alternatively, choose to test the cells with the desired test substance of choice capable of inducing oxidative stress within the cells.</li>
</ol>
2. Stock and dilute solution preparation for DHE staining of cells
<ol>
	<li>Prepare DHE stock solution (5&#160;mg/mL or 15.9 mM) by dissolving 5 mg of DHE into 1 mL of DMSO.</li>
	<li>Dilute the DHE stock solution with double distilled autoclaved water to a final 100 &#181;M concentration.</li>
	<li>To avoid the freeze and thaw process of the dye (which may damage the fluorescence properties over time), prepare several aliquots in 1.5 mL centrifuge tubes with a concentration of 100 &#181;M and store them at -20 &#176;C.</li>
	<li>To achieve a final working concentration of 10 &#181;M, use an aliquot of the 100 &#181;M DHE concentration and dilute it with pre-warmed DMEM media. 
	NOTE: The working solution must be prepared fresh on the day of the experiment.</li>
	<li>Vortex the working fluorescence dye solution for 5-10 s to ensure proper mixing of the dye.</li>
</ol>
3. DHE staining process
<ol>
	<li>Remove the drug- or test-substance-containing media from each well and wash it gently once with either 1x PBS or DMEM. 
	NOTE: When performing the addition or washing steps in the experiment, it is crucial to avoid direct contact between the cells and the pipettor. This can be achieved by gently pipetting the PBS along the sides of the wells to minimize any potential mechanical damage to the cells. Ensuring that the pipettor does not directly touch the cells will help maintain the cell integrity and viability for the duration of the experiment.</li>
	<li>Add 100 &#181;L of DMEM media containing 10 &#181;M DHE (working solution) into each well and incubate at 37 &#176;C for 30 min.</li>
	<li>After 30 min incubation period, remove the DHE-containing media and wash each well gently three times with the 1x phosphate-buffered saline (PBS). This may be performed with a multi-channel pipettor to ensure rapid turnaround.</li>
	<li>Add 200 &#181;L of 1x PBS to each well with Hoechst 33342 nuclear staining dye for 10 min at RT.</li>
	<li>Remove the Hoechst 33342 nuclear staining solution from the well and add 200 &#181;L of 1x PBS to each well. 
	NOTE: To obtain fixed cells, follow the same protocol as for the live cells, with one additional step of adding 4% PFA for 5 min after treatment and DHE staining. Remove the PFA solution and wash cells with the 1x PBS. Then, incubate the cells with the nuclear staining dye for 10 min.</li>
	<li>Move the plate over to the high-content screening platform, fluorescence microscopy, or plate reader for image acquisition as quickly as possible.</li>
</ol>
4. Image acquisition and intensity measurement
<ol>
	<li>Plate loading
	<ol>
		<li>Open the Cellomics CX7 high-content screening (HCS) software for data acquisition.</li>
		<li>Carefully calibrate the imaging platform as per the manufacturer&#39;s specifications ahead of time with the specific 96-well plate of choice for use to avoid any hazy or blurry images in the data. 
		NOTE: Multi-well plates from various vendors may have different material properties and can influence the quality of the final images obtained.</li>
		<li>Once calibrated, save the system parameters specific to the plate brand in the instrument database and reuse them for future data acquisitions.</li>
		<li>Carefully place the plate with the prepared samples onto the heated stage of the HCS imaging system. Make sure that the plate is securely positioned and in the correct orientation for imaging on the microplate holder (i.e., locate the label marked A1 on the Reader stage, then rotate the microplate so that the location of well A1 matches the corner with the sticker).</li>
		<li>Gently press down on the microplate to ensure it rests flat against the stage. Uneven leveling of the plate in the HCS system can lead to errors in image acquisition.</li>
		<li>After the plate is in place, press and hold the Ctrl key, then click Ctrl-OK in the Plate Load/Unload dialog in the software.</li>
	</ol>
	</li>
	<li>Selecting imaging parameters
	<ol>
		<li>In the HCS imaging system, open Target Activation mode in the Cellomics bio-applications interface and create a new protocol using the two-channel setup protocol compatible with (a) nuclear staining and (b) DHE fluorescence probe data acquisition. In the current protocol, the filters&#160;386_BGSRS_BGSRS, 480_BGS_RS, and 386_BGS_RS&#160;were&#160;used for (a) Hoechst 33342 nuclear-staining, (b) total ROS production, and (c) superoxide radical detection, respectively. The choice of these filters was driven by the specific overlap for the emission properties of each dyes (DAPI and DHE) used as a part of this protocol. 
		NOTE: The naming convention of filters, e.g., 386-23_BGRFRN_BGRFRN, refers to the excitation of the sample with 386 nm light with a 23 nm bandwidth, followed by a dichroic filter that passes blue (B), green (G), red (R), far-red (FR), and near infra-red (N) light at specific wavelength ranges and the 386_BGS_RS refers to an emission filter that passes BGS and RS emission wavelength light after the dichroic.</li>
		<li>Specify the objectives for the image acquisition process within the software protocol interface, such as 10x or 20x magnification, as necessary.</li>
		<li>Choose the appropriate objective magnification depending on the desired level of imaging detail and resolutions necessary for the experiment. However, the resolution of each objective is fixed. Higher resolution detail will necessitate changing out the objective on the platform. In the current protocol, a 20x, 0.45 NA objective is used, which is a part of the high-content screening platform used in this protocol. 
		NOTE: The 20x objective represents a good trade-off between imaging resolution detail and the speed of acquisition necessary to capture ROS changes over time. Higher magnification objectives may be chosen (e.g., 40X), however, this will lead to increased acquisition times.</li>
		<li>Specify the exposure settings of the image acquisition camera, such as the exposure time, camera binning, and z-stack interval, according to the specific requirements of the protocol. 
		NOTE: The exposure time (often in milliseconds) varies based on the signal strength and sensitivity of the specific fluorophores used. This may also differ slightly from experiment to experiment based on the dye concentration and staining quality. In the current protocol, the parameters of acquisition are fixed as follows - Target % - 35%, image acquisition mode - 1104 x 1104 (with 2x2 binning), and objective 20x, 0.45 NA. These parameters may be set according to the specific experimental conditions.</li>
	</ol>
	</li>
	<li>Imaging configuration parameters 
	NOTE: Once the imaging parameters are set, the image collection process may be initiated using the software interface.
	<ol>
		<li>Image collection parameters
		<ol>
			<li>Identify the primary tracking object of interest (the nucleus of the cells) using different algorithms available in the instrument (optics - isodata, fixed, and triangle). 
			NOTE: The isodata method for the identification and marking of the primary object is used in this protocol.</li>
			<li>Segment the object (if any) either by shape or intensity parameter.</li>
			<li>Validate the primary object based on the desired size, shape, and intensity parameters unique to each cell type.</li>
			<li>Then, define the &#39;region of interest&#39; (ROI) around this primary object. 
			NOTE: The ROI is a key parameter of data acquisition that defines the location where the intensity of the fluorescence dye is identified to be consistent and repeatable across cell types. The ROI defines the key parameters (such as the intensity of the dye), which are measured for each primary tracking object (i.e., a cell) in different channels of the instrument. The ROI may be defined in the form of a circle or ring around the nucleus of each cell. The HCS software automatically obtains the intensity of the DHE fluorescence dye marker in channel 2 within the limit of the ROI for each cell that is segmented and analyzed in an automated manner.</li>
			<li>Set a 20 &#181;m circle around the primary object (nucleus). The distance of 20 &#181;m was chosen in this study based on the approximate sizes of the various cell lines used in this protocol (HepG2, JHH-4, and HUH-7). The 20 &#181;m ring ROI around the cells obtained the fluorescence intensity in a consistent and repeatable manner. 
			NOTE The key parameter in choosing an ROI is the ability to adequately cover the cell area; the size of the circular ROI depends on the cell size. Larger cells may require a larger ROI and vice-versa for a smaller ROI. These parameters must be determined ahead of time for each cell type and fluorescence dye of interest.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Population characterization and select features to store
	<ol>
		<li>Once the various acquisition parameters are defined in the HCS imaging protocol, set the HCS system into the data acquisition mode.</li>
		<li>The image acquisition parameters for this protocol were set as follows: a scan limit of 1000 cells/well, with a minimum requirement of 10 objects (cells) per field. 
		NOTE: The number of fields assessed for each well was determined based on the final cell count reaching the number 1000. The HCS system continues searching various locations within the well until it obtains the target population of 1000 cells/well. The acquisition speed thus depends upon the confluency and the total cell numbers present in each well of the 96-well plate. In the current protocol, the total- and average- intensity of channel 2 (representing the superoxide radicals and total ROS production) were collected from each well for further downstream analyses.</li>
	</ol>
	</li>
	<li>Image capture, processing, and analysis
	<ol>
		<li>After adjusting and finalizing the image acquisition parameters, initiate the scanning process for each 96-well plate. 
		NOTE: Cellomics CX7 imaging system enables high-content screening and automated analysis of samples of a variety of parameters, including ROS production within cells in a high-throughput manner. In addition to the ROS production, the HCS system is capable of providing additional valuable information about various parameters such as cell morphology, subcellular localization, and many other cellular features of interest. Once optimized for acquisition, the HCS imaging platform allows for comprehensive, qualitative, and quantitative characterization of cell parameters in a robust manner.</li>
		<li>After the scanning process is complete, launch the View Analysis software and export the various quantitative data parameters in a .csv format for additional analysis.</li>
		<li>Using third-party software, copy and paste the various quantitative values of interest for additional downstream analyses. 
		NOTE: In the current protocol, GraphPad Prism software was used to analyze the DHE intensity values in response to induced oxidative stress due to H2O2 and menadione exposures.</li>
	</ol>
	</li>
	<li>Data and statistical analysis
	<ol>
		<li>Calculate the mean average intensity of channel 2 (representing the total ROS values and superoxide radicals). 
		NOTE: All the experiments to calculate the intensity values were repeated three times with 6 replicates per condition at each dosing level.</li>
		<li>Perform one-way ANOVA or t-test to measure the differences in the intensity values between various test conditions.</li>
	</ol>
	</li>
</ol>

Novel ROS Quantification Using Dihydroethidium in Liver Cancer Cells

<ol>
	<li>Juan, C. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+chemistry+of+reactive+oxygen+species+(ros)+revisited:+Outlining+their+role+in+biological+macromolecules+(DNA,+Lipids+and+Proteins)+and+induced+pathologies.">The chemistry of reactive oxygen species (ros) revisited: Outlining their role in biological macromolecules (DNA, Lipids and Proteins) and induced pathologies.</a> Int J Mol Sci. 22 (9), 4642 (2021).</li><li>Magnani, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+and+mechanisms+of+ROS+generation+by+NADPH+oxidases.">Structure and mechanisms of ROS generation by NADPH oxidases.</a> Curr Opin Struct Biol. 59, 91-97 (2019).</li><li>Collin, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical+basis+of+reactive+oxygen+species+reactivity+and+involvement+in+neurodegenerative+diseases.">Chemical basis of reactive oxygen species reactivity and involvement in neurodegenerative diseases.</a> Int J Mol Sci. 20 (10), 2407 (2019).</li><li>Uttara, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oxidative+stress+and+neurodegenerative+diseases:+a+review+of+upstream+and+downstream+antioxidant+therapeutic+options.">Oxidative stress and neurodegenerative diseases: a review of upstream and downstream antioxidant therapeutic options.</a> Curr Neuropharmacol. 7 (1), 65-74 (2009).</li><li>Dikalov, S. I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electron+paramagnetic+resonance+measurements+of+reactive+oxygen+species+by+cyclic+hydroxylamine+spin+probes.">Electron paramagnetic resonance measurements of reactive oxygen species by cyclic hydroxylamine spin probes.</a> Antioxid Redox Signal. 28 (15), 1433-1443 (2018).</li><li>Wang, Q., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+reactive+oxygen+species+(ROS)+and+mitochondrial+ROS+in+AMPK+knockout+mice+blood+vessels.">Measurement of reactive oxygen species (ROS) and mitochondrial ROS in AMPK knockout mice blood vessels.</a> Methods Mol Biol. 1732, 507-517 (2018).</li><li>Griendling, K. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+reactive+oxygen+species,+reactive+nitrogen+species,+and+redox-dependent+signaling+in+the+cardiovascular+system:+a+scientific+statement+from+the+American+Heart+Association.">Measurement of reactive oxygen species, reactive nitrogen species, and redox-dependent signaling in the cardiovascular system: a scientific statement from the American Heart Association.</a> Circ Res. 119 (5), e39-e75 (2016).</li><li>Kalyanaraman, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+reactive+oxygen+and+nitrogen+species+with+fluorescent+probes:+challenges+and+limitations.">Measuring reactive oxygen and nitrogen species with fluorescent probes: challenges and limitations.</a> Free Radic Biol Med. 52 (1), 1-6 (2012).</li><li>Gomes, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluorescence+probes+used+for+detection+of+reactive+oxygen+species.">Fluorescence probes used for detection of reactive oxygen species.</a> J Biochem Biophys Methods. 65 (2-3), 45-80 (2005).</li><li>Halliwell, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Free radicals in biology and medicine. , (2015).</li><li>Cho, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluorescence-based+detection+and+quantification+of+features+of+cellular+senescence.">Fluorescence-based detection and quantification of features of cellular senescence.</a> Methods Cell Biol. 103, 149-188 (2011).</li><li>Dikalov, S. I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methods+for+detection+of+mitochondrial+and+cellular+reactive+oxygen+species.">Methods for detection of mitochondrial and cellular reactive oxygen species.</a> Antioxid Redox Signal. 20 (2), 372-382 (2014).</li><li>Kalyanaraman, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+developments+in+detection+of+superoxide+radical+anion+and+hydrogen+peroxide:+Opportunities,+challenges,+and+implications+in+redox+signaling.">Recent developments in detection of superoxide radical anion and hydrogen peroxide: Opportunities, challenges, and implications in redox signaling.</a> Arch Biochem Biophys. 617, 38-47 (2017).</li><li>Robinson, K. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Selective+fluorescent+imaging+of+superoxide+in+vivo+using+ethidium-based+probes.">Selective fluorescent imaging of superoxide in vivo using ethidium-based probes.</a> Proc Natl Acad Sci U.S.A. 103 (41), 15038-15043 (2006).</li><li>Zielonka, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+2-hydroxyethidium+in+cellular+systems:+a+unique+marker+product+of+superoxide+and+hydroethidine.">Detection of 2-hydroxyethidium in cellular systems: a unique marker product of superoxide and hydroethidine.</a> Nat Protoc. 3 (1), 8-21 (2008).</li><li>Nazarewicz, R. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+and+specific+measurements+of+superoxide+using+fluorescence+spectroscopy.">Rapid and specific measurements of superoxide using fluorescence spectroscopy.</a> J Biomol Screen. 18 (4), 498-503 (2013).</li><li>Murphy, M. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Guidelines+for+measuring+reactive+oxygen+species+and+oxidative+damage+in+cells+and+in+vivo.">Guidelines for measuring reactive oxygen species and oxidative damage in cells and in vivo.</a> Nat Metab. 4 (6), 651-662 (2022).</li><li>Ameziane-El-Hassani, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+reactive+oxygen+species+in+cells+undergoing+oncogene-induced+senescence.">Detection of reactive oxygen species in cells undergoing oncogene-induced senescence.</a> Oncogene-Induced Senescence: Methods Protoc. 1534, 139-145 (2017).</li><li>Abraham, , et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+content+screening+applied+to+large-scale+cell+biology.">High content screening applied to large-scale cell biology.</a> Trends Biotechnol. 22 (1), 15-22 (2004).</li><li>Criddle, D. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Menadione-induced+reactive+oxygen+species+generation+via+redox+cycling+promotes+apoptosis+of+murine+pancreatic+acinar+cells.">Menadione-induced reactive oxygen species generation via redox cycling promotes apoptosis of murine pancreatic acinar cells.</a> J Biol Chem. 281 (52), 40485-40492 (2006).</li><li>Goffart, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+type+and+source+of+reactive+oxygen+species+influences+the+outcome+of+oxidative+stress+in+cultured+cells.">The type and source of reactive oxygen species influences the outcome of oxidative stress in cultured cells.</a> Cells. 10 (5), 1075 (2021).</li><li>Kurutas, E. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+importance+of+antioxidants+which+play+the+role+in+cellular+response+against+oxidative/nitrosative+stress:+current+state.">The importance of antioxidants which play the role in cellular response against oxidative/nitrosative stress: current state.</a> Nutr J. 15 (1), 71 (2015).</li><li>Shad, K. F., Das, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Introductory+Chapter:+Role+of+Fenton+and+Haber-Weiss+Reaction+in+Epilepsy.">Introductory Chapter: Role of Fenton and Haber-Weiss Reaction in Epilepsy.</a> Epilepsy-Seizures without Triggers. IntechOpen. , (2023).</li></ol>

The authors declare that they have no competing interests.

In this study, a protocol to assess superoxide-driven intracellular reactive oxygen species (ROS) production using dihydroethidium (DHE) fluorescence dye was established on a high-content screening system. A majority of the current protocols available in the literature use the DCFH-DA as a fluorescence imaging probe to quantify ROS species. However, multiple studies have shown the DCFH-DA is not an ideal probe for the measurement of intracellular ROS. Various reasons postulated for the unsuitability of DCFH-DA as a probe...

Reactive oxygen species (ROS) are a group of naturally occurring, highly reactive, and temporally unstable chemical radicals formed as a part of the normal cellular metabolism in&#160;cells. ROS plays a key and essential role in the modulation of normal physiological and biochemical processes occurring in cells1,2. The main source of ROS production in cells is from the mitochondrial electron transport chain (ETC) pathway as a part of the normal bioenergetic cycle. Significant additional sources of ROS production include enzymatic reactions such as cellular NADPH oxidases in cells. Metabolism of food molecules (e.g., glucose) occurs via the oxidative phosphorylation pathway in the mitochondrial matrix. A baseline level of ROS production is essential to regulate normal physiological cell signaling processes. Many key protein molecules that are part of the glucose metabolic signaling pathways (e.g., Akt and PTEN) are known to respond to intracellular ROS levels. Additionally, ROS are produced by various intracellular enzymes such as xanthine oxidase, nitric oxide synthase, and peroxisomal constituents as a part of the cellular enzymatic pathways1,2. In contrast to the natural sources of ROS, certain environmental factors, such as xenobiotics, infectious agents, UV light, pollution, cigarette smoking, and radiation, also lead to excessive production of ROS, which are a key driver of intra-cellular oxidative stress1,3. Elevated cellular oxidative stress can cause damage to native biomolecules inside a cell, such as lipids, proteins, and DNA, causing various diseases such as cancer, diabetes, cardiovascular disease, chronic inflammation, and neurodegenerative disorders1,3,4. Therefore, accurate measurements of ROS are essential to understand&#160;the cellular mechanisms involved in oxidative stress-induced disease pathophysiology.
Due to the short timescales of ROS production and elimination inside cells, quantitative measurements of various ROS radicals remains a challenge. Methods such as electron paramagnetic resonance (EPR)5, high-pressure liquid chromatography (HPLC), and fluorescence probe-based imaging are used to measure the various cellular ROS6. While methods such as EPR and HPLC yield quantitatively accurate estimates, these methods involve the destruction of the cellular spatial morphology and are usually in the form of global and bulk measurements of a sample. In contrast, imaging-based methods such as fluorescence probe-based methods retain the cellular morphology and spatial context of the ROS generation. However, the specificity of various fluorescence probes for different types of ROS radicals has not been well-established7,8. Several fluorescent probes such as dihydroethidium (DHE), dichlorodihydrofluorescein diacetate (DCFH-DA), dihydrorhodamine (DHR), dimethyl anthracene (DMA), 2,7 dichlorodihydroflurescein (DCFH), 1,3-Diphenylisobenzofuran (DPBF), and MitoSox are available for ROS detection commercially. In the past decades, DHE, MitoSox, and DCFH-DA are the commonly used fluorescent dyes to measure ROS in cells and tissues8,9. DCFH-DA is a widely used dye for detecting intracellular H2O2 and oxidative stress. Despite the popularity of DCFH-DA, multiple previous studies have shown that it cannot be reliably used to measure intracellular H2O2 and other ROS levels8,9,10,11,12,13,14.
In contrast, the fluorescent probe dihydroethidium (DHE) shows a specific response to the intra-cellular superoxide radical (O2-). While the superoxide radical is one of many of the ROS species observed in cells, it is an important radical involved in the reduction of transition metals, conversion to peroxynitrate, and formation of hydroperoxides, among other intracellular effects. DHE is quickly taken up by the cells and has a fluorescence emission in the red wavelength range15. Upon reaction with superoxide radical specifically, DHE forms a red fluorescent product, 2-hydroxy ethidium (2-OH-E+). Thus, DHE may be considered as a specific probe for superoxide detection. However, DHE can also undergo nonspecific oxidation with ONOO- or OH., H2O2, and cytochrome c to form a second fluorescence product, ethidium E+, which can interfere with the measured 2-OH-E+ levels. However, these 2-OH E+ and E+ products, in combination, represent a major part of the total cellular ROS species observed inside a cell when stained with DHE. E+ intercalates into DNA, greatly enhancing its fluorescence8,9,10,11,13,14,15,16. Since the fluorescence spectra of ethidium and 2-hydroxy ethidium only differ slightly, the majority of ROS levels seen in a cell secondary to superoxide production can be detected and measured using DHE fluorescence products. These ROS species are identified using 480 nm wavelength excitation and 610 nm wavelength emission15,16,17.
In addition to choosing a specific fluorescent ROS detection probe, it is important to choose a sensitive method of detection to measure intracellular ROS. Accurate assessment of intracellular ROS levels is thus key to identifying disturbed redox balance states occurring in diseased cells or cells that have been exposed to various environmental stressors such as radiation, toxicological compounds, and genotoxic agents18. Since ROS is a commonly occurring phenomenon in cells that is responsible for regulating a variety of cell signaling activities, robust methods of detection of ROS are essential. To enable such high-throughput evaluation of ROS production within cells, this protocol uses a high-content screening (HCS) platform to measure the ROS species. The current protocol allows the high-throughput analysis of intracellular ROS production, which is of critical importance in many toxicology studies19. This protocol aims to provide an easy and versatile solution to detect and measure intracellular ROS in adherent hepatocellular carcinoma cells. The chemical reagents of H2O2 and menadione are used as potent ROS stimulators to measure the relative levels of ROS production in a controlled and high throughput setting. This protocol may be fine-tuned to measure ROS production in adherent and nonadherent cells under appropriate conditions, as necessary.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>1.5 mL centrifuge tubes&#160;</td>
			<td>VWR&#160;</td>
			<td>20170-038&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>96- well plate&#160;</td>
			<td>Corning Costar&#160;</td>
			<td>07-200-90&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>Cellomics Cx7</td>
			<td>ThermoFisher&#160;</td>
			<td>HCSDCX7LEDPRO</td>
			<td></td>
		</tr>
		<tr>
			<td>Collagen&#160;</td>
			<td>Advanced Biomatrix&#160;&#160;</td>
			<td>5056&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>DHE (Dihydroethidium)&#160;</td>
			<td>ThermoFisher&#160;</td>
			<td>D1168&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>DMEM&#160;</td>
			<td>Sigma&#160;&#160;</td>
			<td>6046&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>FBS&#160;</td>
			<td>VWR&#160;</td>
			<td>97068-085&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>GraphPad Prism</td>
			<td>GraphPad</td>
			<td>Version 6.0</td>
			<td></td>
		</tr>
		<tr>
			<td>HepG2 cell line</td>
			<td>ATCC</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Hoechst&#160;</td>
			<td>ThermoFisher&#160;</td>
			<td>33342&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>HUH7 cell line</td>
			<td>ATCC</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen Peroxide&#160;</td>
			<td>Sigma&#160;</td>
			<td>88597&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>JHH4 cell line</td>
			<td>ATCC</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Menadione&#160;</td>
			<td>Sigma&#160;</td>
			<td>M5625&#160;</td>
			<td></td>
		</tr>
	</tbody>
</table>

high throughput screening assessment of reactive oxygen species (ros) generation using dihydroethidium (dhe) fluorescence dye

Reactive oxygen species (ROS) play a key role in the regulation of cellular metabolism in physiological and pathological processes. Physiological ROS production plays a central role in the spatial and temporal modulation of normal cellular functions such as proliferation, signaling, apoptosis, and senescence. In contrast, chronic ROS overproduction is responsible for a wide spectrum of diseases, such as cancer, cardiovascular disease, and diabetes, among others. Quantifying ROS levels in an accurate and reproducible manner is thus essential to understanding normal cellular functionality. Fluorescence imaging-based methods to characterize intra-cellular ROS species is a common approach. Many of the imaging ROS protocols in the literature use 2&#39;-7&#39;-dichlorodihydrofluorescein diacetate (DCFH-DA) dye. However, this dye suffers from significant limitations in its usage and interpretability. The current protocol demonstrates the use of a dihydroethidium (DHE) fluorescent probe as an alternative method to quantify total ROS production in a high-throughput setting. The high throughput imaging platform, CX7 Cellomics, was used to measure and quantify the ROS production. This study was conducted in three hepatocellular cancer cell lines - HepG2, JHH4, and HUH-7. This protocol provides an in-depth description of the various procedures involved in the assessment of ROS within the cells, including - preparation of DHE solution, incubation of cells with DHE solution, and measurement of DHE intensity necessary to characterize the ROS production. This protocol demonstrates that DHE fluorescent dye is a robust and reproducible choice to characterize intracellular ROS production in a high-throughput manner. High throughput approaches to measure ROS production are likely to be helpful in a variety of studies, such as toxicology, drug screening, and cancer biology.

Author Spotlight: High-Throughput Measurement of Intracellular ROS Levels in Hepatocellular Lines

High Throughput Screening Assessment of Reactive Oxygen Species (ROS) Generation using Dihydroethidium (DHE) Fluorescence Dye

Our lab studies the impact of environmental pollutants, like heavy metals, on liver function and diseases related to reactive oxygen species production. This protocol aims to quantitatively measure ROS levels in cells using a dihydroethidium fluorescence probe. This protocol uses a high-content screening platform to quantitatively measure intracellular ROS species levels in hepatocellular lines.Measuring intercellular ROS level accurately is of critical importance in high-throughput toxicology study, which is a key area of interest in our lab. DHE fluorescence is a highly specific method for measuring total ROS levels, particularly targeting the superoxide radical, are giving it a significant advantage over other commonly used ROS fluorescence probe. Additionally, this protocol offer the unique ability to measure total cellular ROS level in a high-throughput platform.Our protocol is a robust and reproducible choice to characterize intracellular total ROS production. High-throughput approaches to measure ROS levels are helpful in a variety of studies, such as toxicology, drug screening, and cancer biology, which will be our focus in the future.

Dihydroethidium (DHE) is a superoxide-responsive fluorescence dye that provides specific information regarding the intracellular ROS states. DHE dye intrinsically emits blue fluorescence in the cytoplasm. However, upon interaction with superoxide radicals, it is transformed into 2-hydroxyethidium, which emits fluorescence in the red wavelengths (&#62;550 nm) (Figure 1). DHE dye is easily transported into the cells and the nucleus. The fluorescence emitted can be visualized with a fluorescenc...

Watch this Scientific Journal Video about High Throughput Screening Assessment of Reactive Oxygen Species ROS Generation using Dihydroethidium DHE Fluorescence Dye at JoVE.com

This protocol describes a novel method to quantify intracellular reactive oxygen species (ROS) using dihydroethidium (DHE) as a fluorescence dye probe using a high-throughput screening approach. The protocol describes the methods for quantitative assessment of intracellular reactive oxygen species (ROS) in the three different hepatocellular carcinoma cell lines.

Reactive oxygen species (ROS) play a key role in the regulation of cellular metabolism in physiological and pathological processes. Physiological ROS ...

high-throughput-screening-assessment-reactive-oxygen-species-ros

Research

JoVE Journal

Bioengineering

Dihydroethidium &#40;DHE&#41; Staining of Hepatocarcinoma Cells for the Quantification of Reactive Oxygen Species &#40;ROS&#41;

3.0K Views.  University of New Mexico.  This protocol describes a novel method to quantify intracellular reactive oxygen species (ROS) using dihydroethidium (DHE) as a fluorescence dye probe using a high-throughput screening approach. The protocol describes the methods for quantitative assessment of intracellular reactive oxygen species (ROS) in the three different hepatocellular carcinoma cell lines.

Novel ROS Quantification Using Dihydroethidium in Liver Cancer Cells

Podsumowanie