Collecting Marine Gnathiid Isopod Fish Parasites with Light Traps

Podsumowanie

We present a method to collect marine gnathiid isopod fish parasites using light traps placed at field sites via breath-hold diving or scuba diving.

Streszczenie

A method to collect marine gnathiid isopod fish parasites with the use of light traps is presented. Gnathiid isopods are a major group of marine fish parasites that feed on blood and fluid from host fishes, mostly at night. Like ticks and mosquitos on land, they associate only temporarily with their host and spend most of their life free-living in the benthos. Given their high mobility and transient and predominantly nocturnal association with hosts, they cannot easily be collected by capturing free-living hosts. However, they are readily attracted to underwater light sources, creating the opportunity to collect them in light traps. Here the design and individual steps involved in the deployment and processing of specially adapted light traps for collecting free-living stages of gnathiid isopods are outlined. Sample results and possible modifications of the basic protocol for a variety of different sampling needs are presented and discussed.

Wprowadzenie

Parasitic crustaceans are important in the ecology and life histories of reef fishes. The biomass and energy they remove from their hosts are considerable and influence behavior, physiology, and survivorship¹. Gnathiid isopod crustaceans represent the most prominent group of fish parasites in tropical and subtropical reef systems, where they are both abundant and diverse^2,3 and are the primary food item of cleaner fishes^4,5. Gnathiids are generally 1-3 mm in size. They have unusual life histories in which only the three juvenile stages feed on the blood and body fluids of fishes^6,7. They are most active at night^8,9, and while vision appears to play some role, host-finding¹⁰ relies heavily on olfactory cues to find hosts^11,12. Each of the three juvenile feeding stages feeds on a single host fish, with each feed separated by a molting phase. After the final feed, third-stage larvae metamorphose into non-feeding adults, which reproduce and then die. Given that feeding requires only brief association with the host, while each inter-feeding interval lasts days, gnathiids spend most of their life free-living in the benthos.

Gnathiids impact hosts in multiple ways¹. Aside from their role as drivers of interactions between cleaner fish and clients^13,14,15, gnathiids can increase cortisol levels and decrease hematocrit in adult fish hosts¹⁶ and in high numbers, can even cause death¹⁷. For juvenile fish, even a single gnathiid can be fatal^18,19,20, and even if the fish survives, its ability to compete for space and escape predators is compromised^20,21,22. Avoiding gnathiids may even constitute one of the benefits of nocturnal migration in some reef fishes²³.

In addition to cleaner fishes, gnathiid populations can be impacted by other micro carnivorous fishes²⁴, as well as corals^25,26. Ocean warming and the associated loss of live corals appear to have opposing impacts on gnathiids^27,28,29.

Given their clear ecological importance and the likely influence of anthropogenic environmental change on their populations, there are compelling reasons to include them in ecological studies of coral reefs. However, their unique life history and the small number of researchers who study them create a barrier to the development, implementation, and dissemination of reliable, reproducible sampling methods to collect them for research.

Light traps have long been used to collect small marine organisms at night^30,31. They take advantage of and are based on the fact that many nocturnally active organisms, including arthropods, are attracted to light. Traditionally they have been used to collect planktonic organisms in the water column³⁰. However, the basic principles can be applied to collecting free-swimming organisms that are active near the benthos. Here we present a light trapping method adapted for collecting free-living stages of gnathiid isopods near the ocean bottom in remote coral reef environments such as the Philippines. For collecting in remote areas, these light traps (Figure 1) offer some advantages over other methods developed for collecting these organisms³². They are highly portable and durable, requiring only three parts, which are easily obtainable and inexpensive. They are also negatively buoyant, as when deployed, they are completely filled with seawater. Because they depend on light for attraction, they are only effective at night for collecting nocturnally active species. They also attract more than the target species, requiring sorting of the samples under a dissecting scope to obtain the target organisms. Three methods have thus far been used by our team and collaborators to collect gnathiids in coral reef systems throughout the world³². These include emergence traps, live fish-baited traps, and light traps, each with advantages and limitations.

Protokół

Collection of samples was permitted by the Department of Agriculture-Bureau of Fisheries and Aquatic Resources (0154-18 DA-BFAR) in accordance with Philippine laws and regulations (RA 9147; FAO 233) and approved by the Silliman University (SU) animal ethics committee.

1. Light Traps

1. Construction
   1. Construct light traps from commercial polyvinyl chloride (PVC) tubes originally designed for plumbing. Use 10-15 cm diameter PVC cut to 30-40 cm length (Figure 1).
   2. To both ends of the tubes, add PVC "caps" with a transparent acrylic funnel inserted in the center of the opening and glue in place with transparent epoxy glue (Figure 1). Let it dry.
   3. Ensure that one end of the tube has a screw-on or otherwise removable lid and that both ends are water-tight when the trap is "closed" (e.g., with the addition of an O-ring).
2. Light source
   1. Before deployment, turn on an underwater light/torch (see Table of Materials) and place it in the tube, facing one of the transparent funnels, such that the light from the underwater torch illuminates the area in front of one side of the tube. If necessary, chemical glow sticks can be used in place of underwater torches, although their light intensity is lower.
      NOTE: The light attracts a variety of small nocturnal organisms³¹, including gnathiids, and drives them to swim into the tube through the clear funnel. Once they have entered the tube, they are unable to escape due to the geometry of the light trap (small funnel opening) and the continued presence of a light source.
3. Placement
   1. When in the water at the deployment site, fill light traps, with the light turned on, with seawater, and secure both ends. To ensure that the torch is not below or blocking the funnel tip, tilt the "front" of the tube upward to allow the torch to slide back away from the funnel.
   2. Place traps on the seafloor, in the sand or rubble, next to coral heads or other complex structures known to attract fish. Focus the light cone "inwards", towards areas where fish aggregate.
      NOTE: In shallow water, traps can be placed by breath-hold diving. Deeper deployment requires scuba.
4. Retrieval
   1. Immediately prior to retrieving the trap, seal the openings of both the funnels (on either end of the tube) with a piece of modeling clay or rubber stopper sealing, keeping all the seawater and the contained organisms inside.
      NOTE: The organisms will remain in the trap once the batteries of the lights have expired and the light is no longer illuminated. This provides flexibility when the traps are retrieved ("soak time"). Factors to consider when deciding on soak time are presented below (see Discussion).
5. Transport
   1. Once the traps have been retrieved from the bottom, carry them to a boat, or swim ashore.
   2. Maintain traps close to ambient seawater temperature once removed from the ocean.
   3. Transport them to the laboratory for processing as soon as possible since no gas or water exchange will take place once removed from the ocean.

2 Laboratory processing

1. Storing and filtering of the samples
   1. Once the light traps are removed from the ocean and brought back to the lab, empty their contents into buckets with fresh seawater.
   2. Add aeration to keep organisms alive until filtering.
   3. Filter the contents of the bucket by pouring through a funnel lined with 50-100 µm plankton mesh, then empty the contents into a 100 mL container of fresh seawater.
   4. Use a pipette to draw from this smaller container to place aliquots of the sample into a Petri dish for microscopy. Repeat until the entire sample has been processed.
2. Gnathiid isopod identification and rearing
   1. Because light trap samples attract multiple species of small invertebrates, carefully screen the samples to identify and remove gnathiid isopods. 10-20x magnification is the best for this task (Figure 2).
      NOTE: Identifying gnathiids at the family level does not require living specimens. However, adult gnathiids, which are seldom caught in light traps, are needed for morphological species identification and breeding (see reference^1,3,9 for a methodology for breeding and rearing gnathiids in captivity).
   2. In cases where gnathiids need to be kept alive for rearing, gently remove them with a pipette and place them in small plastic containers of fresh seawater.

Wyniki

For sampling in the central Philippines, the outlined trap design (Figure 1) was used. When 36 traps were set overnight (in one site), 1 to 1343 gnathiids per trap (275 ± 54) were collected. These included both fed and unfed juvenile stages (Figure 2; Table 1, 2). These results demonstrate the effectiveness of light traps for collecting gnathiid isopods under the study conditions. Figure 3 shows the placement o...

Dyskusje

Traditional light traps, such as those used for collecting larval fishes, are large and are suspended in water column³⁴. In contrast, the light traps described here are small and deployed on the sea bottom. These traps can be easily transported and rapidly deployed. They can be placed by breath-hold (free)-diving in shallow sites (as in this study) or on scuba in deeper sites, and attract both fed and unfed
juvenile stages.

Variations of the benthic light traps de...

Materiały

Name	Company	Catalog Number	Comments
Buckets, small sample containers		hardware store
Funnels	Supplier No. 2209-03	Funnels: AMERICAN SCIENTIFIC LLC SE - 75 mm (3”)	https://us.vwr.com/store/product/8884369/plastic-funnels
Main body of light traps (made from commercially available PVC sanitarty pipes)	(SKU 145640)	Alasco Sanitary uPVC Pipes Series 1000 107mm/4'	https://alascopvcpipes.com/product/alasco-standard-sanitary-upvc-pipe-series-1000/.  This brand can be found in the Philippines. Other simular brands can also be used
Modeling clay		Can be found in art suppliy and childreans toy stores	To seal the funnel after retreival
Plankton mesh (50-100 µm)		any reputable brand and source	https://www.adkinstruments.in/products/plankton-nets-in-various-mesh-size-1633936883
Screw on lids for the light trap		Alasco  Sanitary  Clean-Out  4"	https://alascopvcpipes.com/product/alasco-standard-sanitary-upvc-clean-out/. This brand can be found in the Philippines. Other simular brands can also be used
Scuba/snorkel equipment		any reputable brand and source
Stereo-microscopes		Scientific suppliers
Underwater touches		Princeton Tec Ecoflare or Fantasea Nanospotter 6023