This work has been supported by Elizabeth E. Kennedy Research Award.

1. Preparation of Producer Strain
<ol>
	<li>Streak a pneumococcal strain to be tested for bacteriocin production on a 5% sheep blood tryptic soy agar plate from -80 &#176;C freezer stocks. 
	NOTE: The use of blood plates for initial growth of the strain to be tested for inhibition greatly increases the reproducibility of the assay. Additionally, other non-pneumococcal strains that produce bacteriocins can be used although growth conditions may need to be modified for a specific organism. We have used Streptococcus mitis and Lactococcus lactis in the overlay assay successfully.</li>
	<li>Incubate the plate overnight (O/N) at 37 &#176;C with 5% CO2.</li>
	<li>After incubation of the producer strain, prepare the tryptic soy agar (TSA) plate by pipetting 3,000 to 4,000 units of catalase onto plates containing 25 ml of TSA and spread the catalase solution using sterile glass beads. Let the plate dry for about 10&#160;min&#160;under a biological safety cabinet.</li>
	<li>Collect a visible quantity of bacteria onto a pipette tip. Stab the pipette tip into the dried TSA plate. 
	NOTE: More than one producer strain can be stabbed into a single TSA plate. It is important to space out the stabs so that resulting halos do not overlap.
	<ol>
		<li>If possible, include known bacteriocin producer as a positive control and the strain to be used in the overlay as a negative control. 
		NOTE: Positive and negative controls are have been previously published and are available upon request10.</li>
	</ol>
	</li>
	<li>Incubate TSA plate containing multiple stabs at 37 &#176;C with 5% CO2 for 6 hr.</li>
</ol>
2. Making Glycerol Stocks of the Overlay Strain
<ol>
	<li>Prepare glycerol stocks (cultures grown to mid-exponential phase and then stored at -80 &#176;C after the addition of glycerol) prior to the day of the overlay assay. Inoculate 5-10 colonies of pneumococcal strain to be tested for sensitivity or pheromone secretion in Todd-Hewitt medium with 0.5% yeast extract (THY). 
	NOTE: Construction of BlpC inducible reporters has been previously described2 and strains are available upon request.</li>
	<li>Incubate 5-10 colonies in glass tubes with 5 ml of THY with tightly closed lids in a 37 &#176;C water bath without shaking.</li>
	<li>Incubate cultures at 37 &#176;C until they reach an OD620 of 0.3 to 0.5. 
	NOTE: This will take approximately 4-5 hr depending on the strain used.
	<ol>
		<li>Gently invert the tube a few times prior to measuring the OD.</li>
	</ol>
	</li>
	<li>If the experiment cannot be performed the same day or the strain will be used multiple times in the future, make glycerol stocks and resume the experiment at a later date. For glycerol stocks, add glycerol to cultures to a final concentration of 20%. Aliquot cultures into 1.5 ml microcentrifuge tubes and store at -80 &#176;C. NOTE: Samples can be stored for months at -80 &#176;C. If not making glycerol stocks, use samples directly for overlay assay.</li>
</ol>
3. Overlay Assay
<ol>
	<li>Just prior to overlay application, mix the overlay components. In a 15 ml conical tube, add 5 ml of THY, 3,000-4,000 U of catalase, and 200 &#181;l of the overlay strain broth culture that was either grown that day or a glycerol stock of the culture that was thawed at room temperature. If using the reporter strain, add 50 &#181;l of X-gal (40 mg/ml) to the overlay mixture. Use one conical tube per plate.</li>
	<li>Equilibrate overlay mixture at room temperature prior to addition of molten TSA.</li>
	<li>Remove TSA plate with stabbed strain from incubator. Melt solid TSA in microwave and keep at 55 &#176;C water bath until ready to use. Add 3 ml of molten TSA with 1.5% agar cooled to 55 &#176;C to overlay mixture.
	<ol>
		<li>Prepare the overlay mixture immediately before pipetting, the mixture will begin to solidify very quickly. NOTE: If the overlay begins to solidify before plating, the results will be uninterpretable.</li>
	</ol>
	</li>
	<li>Mix the overlay mixture by pipetting up and down several times with a 5 ml pipet being careful not to introduce bubbles into the mixture. Slowly pipette overlay mixture directly on to the stabbed TSA plate. Keep the plate on the benchtop for few minutes allowing the agar to harden.
	<ol>
		<li>Do not rotate the plate to distribute the overlay mixture, this will pull growth from the stabbed culture into the overlay.</li>
	</ol>
	</li>
	<li>Carefully place TSA plate with overlay into 37 &#176;C incubator containing 5% CO2 O/N (approximately 16-18 hr).</li>
	<li>Observe the plates after overnight growth. The plates should appear opaque from growth of the overlay strain except in areas where inhibition or pheromone signaling has occurred. These will appear as either clear or blue zones around the stabbed strain, respectively. 
	NOTE: Although measurements of the diameter of blue or clearing can be determined for quantitative assessment, differences in the diameter can also vary depending on the amount of bacteria that was stabbed into the plate. The overlay assay is a qualitative assay, any quantitative assessment should be interpreted with caution. Any visible clearing as compared to the negative control is regarded as activity.</li>
</ol>

<ol>
	<li>Dawid, S., Roche, A. M., Weiser, J. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+blp+bacteriocins+of+Streptococcus+pneumoniae+mediate+intraspecies+competition+both+in+vitro+and+in+vivo.">The blp bacteriocins of Streptococcus pneumoniae mediate intraspecies competition both in vitro and in vivo.</a> Infect Immun. 75 (1), 443-451 (2007).</li><li>Sawa, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+and+characterization+of+enterocin+W,+a+novel+two-peptide+lantibiotic+produced+by+Enterococcus+faecalis+NKR-4-1.">Isolation and characterization of enterocin W, a novel two-peptide lantibiotic produced by Enterococcus faecalis NKR-4-1.</a> Appl Environ Microbiol. 78 (3), 900-903 (2012).</li><li>Kochan, T. J., Dawid, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+HtrA+protease+of+Streptococcus+pneumoniae+controls+density-dependent+stimulation+of+the+bacteriocin+blp+locus+via+disruption+of+pheromone+secretion.">The HtrA protease of Streptococcus pneumoniae controls density-dependent stimulation of the bacteriocin blp locus via disruption of pheromone secretion.</a> J Bacteriol. 195 (7), 1561-1572 (2013).</li><li>Lux, T., Nuhn, M., Hakenbeck, R., Reichmann, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diversity+of+bacteriocins+and+activity+spectrum+in+Streptococcus+pneumoniae.">Diversity of bacteriocins and activity spectrum in Streptococcus pneumoniae.</a> J Bacteriol. 189 (21), 7741-7751 (2007).</li><li>Reichmann, P., Hakenbeck, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Allelic+variation+in+a+peptide-inducible+two-component+system+of+Streptococcus+pneumoniae.">Allelic variation in a peptide-inducible two-component system of Streptococcus pneumoniae.</a> FEMS Microbiol Lett. 190 (2), 231-236 (2000).</li><li>Saizieu, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microarray-based+identification+of+a+novel+Streptococcus+pneumoniae+regulon+controlled+by+an+autoinduced+peptide.">Microarray-based identification of a novel Streptococcus pneumoniae regulon controlled by an autoinduced peptide.</a> J Bacteriol. 182 (17), 4696-4703 (2000).</li><li>Barbour, A., Philip, K., Muniandy, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enhanced+production,+purification,+characterization+and+mechanism+of+action+of+salivaricin+9+lantibiotic+produced+by+Streptococcus+salivarius+NU10.">Enhanced production, purification, characterization and mechanism of action of salivaricin 9 lantibiotic produced by Streptococcus salivarius NU10.</a> PLoS One. 8 (10), 77751 (2013).</li><li>Wladyka, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation,+biochemical+characterization,+and+cloning+of+a+bacteriocin+from+the+poultry-associated+Staphylococcus+aureus+strain+CH-91.">Isolation, biochemical characterization, and cloning of a bacteriocin from the poultry-associated Staphylococcus aureus strain CH-91.</a> Appl Microbiol Biotechnol. 97 (16), 7229-7239 (2013).</li><li>Shea, E. F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bactofencin+a,+a+new+type+of+cationic+bacteriocin+with+unusual+immunity.">Bactofencin a, a new type of cationic bacteriocin with unusual immunity.</a> 4 (6), 00498-00413 (2013).</li><li>Son, M. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conserved+mutations+in+the+pneumococcal+bacteriocin+transporter+gene,+blpA,+result+in+a+complex+population+consisting+of+producers+and+cheaters.">Conserved mutations in the pneumococcal bacteriocin transporter gene, blpA, result in a complex population consisting of producers and cheaters.</a> MBio. 2 (5), (2011).</li><li>Kochan, T. J., Dawid, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+HtrA+protease+of+Streptococcus+pneumoniae+controls+density-dependent+stimulation+of+the+bacteriocin+blp+locus+via+disruption+of+pheromone+secretion.">The HtrA protease of Streptococcus pneumoniae controls density-dependent stimulation of the bacteriocin blp locus via disruption of pheromone secretion.</a> J Bacteriol. 195, 1561-1572 (2013).</li><li>Widdick, D. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cloning+and+engineering+of+the+cinnamycin+biosynthetic+gene+cluster+from+Streptomyces+cinnamoneus+cinnamoneus+DSM+40005.">Cloning and engineering of the cinnamycin biosynthetic gene cluster from Streptomyces cinnamoneus cinnamoneus DSM 40005.</a> Proc Natl Acad Sci U S A. 100 (7), 4316-4321 (2003).</li><li>Begley, M., Cotter, P. D., Hill, C., Ross, R. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+a+novel+two-peptide+lantibiotic,+lichenicidin,+following+rational+genome+mining+for+LanM+proteins.">Identification of a novel two-peptide lantibiotic, lichenicidin, following rational genome mining for LanM proteins.</a> Appl Environ Microbiol. 75 (17), 5451-5460 (2009).</li></ol>

The authors have nothing to disclose.

This overlay assay is a rapid way to determine the range of activity for bacteriocin producers and to demonstrate competitive interactions that may occur among pneumococcal strains. The overlay assay can be adapted to use for screening multiple strains for bacteriocin production on a single plate. We have successfully screened large strain collections with this assay by using a 48-pin replicator to inoculate SBA plates from one half of a 96-well plate. After overnight incubation, growth is transferred to the TSA plate us...

Streptococcus pneumoniae, a common colonizer of the polymicrobial community of the nasopharynx, is able to compete with other pneumococci and closely related species through the production of bacterially produced antimicrobial peptides (bacteriocins). Every fully-sequenced pneumococcal strain examined to date contains a version of the bacteriocin-like peptide locus, blp. Bacteriocin production by pneumococcus has been demonstrated to be important in the outcome of both in vitro and in vivo competition1-4. Competitive dynamics are influenced by the expression of diverse bacteriocins along with cognate immunity proteins in response to a specific peptide pheromone. Induction of the blp locus is controlled by a quorum sensing system in which a peptide pheromone, BlpC, binds to the sensor kinase, BlpH, and initiates a signaling cascade resulting in the transcription of the blp locus5,6. There are four allelic variations of BlpC that each bind to its cognate BlpH6. For the cell to survive the effects of its own bacteriocin, the genes that encode cognate immunity proteins are transcribed on the same operon as each of the bacteriocin genes. Killing occurs if a competitor strain is not able to upregulate the blp locus in response to exogenous pheromone or, if the strain lacks the specific immunity gene required for protection. The transporter complex, BlpAB is required for the secretion and processing of the peptide pheromone and the bacteriocin peptides2,4. Recently, it has been shown that a significant proportion of pneumococcal strains are &#8220;cheaters&#8221; meaning they have a conserved mutation in the blpA gene which renders them unable to secrete pheromones and bacteriocins1,2. These strains are able to respond to exogenous BlpC2 secreted by neighboring strains allowing for the production of immunity proteins.
Although, crude preparations of bacteriocins from supernatants can be prepared from producer strains using biochemical methods steps to achieve purity, this approach is not useful for screening large collections of isolates and if the level of bacteriocin expression is low in broth grown cultures2,7-9. The overlay assay is used as a rapid way to investigate the competitive dynamics between strains that may exist in vitro. To do so, a pneumococcal strain is pre-inoculated onto an agar plate and allowed to grow to achieve local bacterial concentrations sufficient for induction of the blp locus. A second strain is then inoculated into a molten soft agar solution which is then applied over the pre-inoculated strain to test for sensitivity. To evaluate for activity of the blp locus (independent of inhibitory activity), strains can be overlaid with a series of three previously described BlpC reporter strains. These strains were constructed to contain one of three different blpH alleles that respond to the three most common BlpC pheromones secreted by the pneumococci. The reporter strains have an integrated lacZ gene that is under the control of a BlpH dependent promoter and carry a deletion in the blpC gene that prevents self-stimulation10,11.

<table border="0" cellpadding="0" cellspacing="0" width="753">
	<tbody>
		<tr height="42">
			<td height="42" style="height:42px;width:212px;">Name of Material/ Equipment</td>
			<td style="width:71px;">Company</td>
			<td style="width:119px;">Catalog Number</td>
			<td style="width:351px;">Comments/Description</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:212px;">Trypticase Soy Agar with 5% Sheep Blood</td>
			<td style="width:71px;">Fisher</td>
			<td style="width:119px;">B21261X&#160;</td>
			<td>For growth from freezer cultures</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">Catalase</td>
			<td style="width:71px;">Sigma</td>
			<td style="width:119px;">C100-500mg</td>
			<td>4,741 Units per plate</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:212px;">Todd Hewitt Broth + Yeast Extract (THY)</td>
			<td style="width:71px;">Fisher</td>
			<td style="width:119px;">DF0492-17-6&#160;</td>
			<td>30 g of THB, 5 g yeast extract, 1 L ddH20 autoclave</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:212px;">Trypticase Soy Broth + Agar plates (TSA)</td>
			<td style="width:71px;">Fisher</td>
			<td style="width:119px;">B11768&#160;</td>
			<td>30 g of TS, 15 g agar, 1 L ddH20 autoclave</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:212px;">5-Bromo-4-chloro-3-indolyl &#946;-D-galactopyranoside (X-gal)</td>
			<td style="width:71px;">Sigma</td>
			<td style="width:119px;">B4252-50MG</td>
			<td>Dissolve in dimethylformamide</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">Petri dishes</td>
			<td style="width:71px;">Fisher</td>
			<td>FB0875712</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">Spectrophometer</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td>Measures the OD620 of cultures</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">37 &#176;C water bath</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">37 &#176;C incubator with 5% CO2</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:212px;">15 ml conical tube</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
	</tbody>
</table>

using the overlay assay to qualitatively measure bacterial production of and sensitivity to pneumococcal bacteriocins

Streptococcus pneumoniae colonizes the highly diverse polymicrobial community of the nasopharynx where it must compete with resident organisms. We have shown that bacterially produced antimicrobial peptides (bacteriocins) dictate the outcome of these competitive interactions. All fully-sequenced pneumococcal strains harbor a bacteriocin-like peptide (blp) locus. The blp locus encodes for a range of diverse bacteriocins and all of the highly conserved components needed for their regulation, processing, and secretion. The diversity of the bacteriocins found in the bacteriocin immunity region (BIR) of the locus is a major contributor of pneumococcal competition. Along with the bacteriocins, immunity genes are found in the BIR and are needed to protect the producer cell from the effects of its own bacteriocin. The overlay assay is a quick method for examining a large number of strains for competitive interactions mediated by bacteriocins. The overlay assay also allows for the characterization of bacteriocin-specific immunity, and detection of secreted quorum sensing peptides. The assay is performed by pre-inoculating an agar plate with a strain to be tested for bacteriocin production followed by application of a soft agar overlay containing a strain to be tested for bacteriocin sensitivity. A zone of clearance surrounding the stab indicates that the overlay strain is sensitive to the bacteriocins produced by the pre-inoculated strain. If no zone of clearance is observed, either the overlay strain is immune to the bacteriocins being produced or the pre-inoculated strain does not produce bacteriocins. To determine if the blp locus is functional in a given strain, the overlay assay can be adapted to evaluate for peptide pheromone secretion by the pre-inoculated strain. In this case, a series of four lacZ-reporter strains with different pheromone specificity are used in the overlay.

There are two possible outcomes in the overlay assay. It should be possible to see growth of the stabbed strain after overnight incubation. In Figure 1A, the overlay strain is sensitive to the bacteriocins being produced. A zone of clearance can be visualized surrounding the stabbed strain. Additionally, swirling of the stabbed strain into the overlay mixture is possible and can be seen in the Figure 1A. In Figure 1B, the overlay strain is immune to the bacteriocins bein...

Watch this Scientific Journal Video about Using the Overlay Assay to Qualitatively Measure Bacterial Production of and Sensitivity to Pneumococcal Bacteriocins at JoVE.com

Using the Overlay Assay to Qualitatively Measure Bacterial Production of and Sensitivity to Pneumococcal Bacteriocins

Competition in Streptococcus pneumoniae is mediated by bacteriocins, small antimicrobial peptides with inhibitory activity towards pneumococcus and other related species.&#160; Here we describe an optimized bacterial overlay assay that allows for the characterization of bacteriocin activity and inhibitory spectrum, bacteriocin-specific immunity, and detection of secreted quorum sensing peptides.

Streptococcus pneumoniae colonizes the highly diverse polymicrobial community of the nasopharynx where it must compete with resident organisms.  We have ...

using-overlay-assay-to-qualitatively-measure-bacterial-production

Research

JoVE Journal

Immunology and Infection

13.4K Views.  University of Michigan. Competition in Streptococcus pneumoniae is mediated by bacteriocins, small antimicrobial peptides with inhibitory activity towards pneumococcus and other related species.  Here we describe an optimized bacterial overlay assay that allows for the characterization of bacteriocin activity and inhibitory spectrum, bacteriocin-specific immunity, and detection of secreted quorum sensing peptides. 