We thank Rev. Dr. Ralph Bohlmann and Rev. Dr. James Voelz for suggesting the word &#8220;anastasis&#8221; to describe reversal of apoptosis; Douglas R. Green for HeLa cells stably expressing cytochrome c-GFP; Charles M. Rudin and Eric E. Gardner for H446 cells; Heather Lamb for assistance in cartoon drawing at the video; Yee Hui Yeo for valuable discussion of this manuscript. This work was supported by a Sir Edward Youde Memorial Fellowship (H.L.T.), the Dr. Walter Szeto Memorial Scholarship (H.L.T.), Fulbright grant 007-2009 (H.L.T.), Life Science Research Foundation fellowship (H.L.T.), NIH grants NS037402 (J.M.H.) and NS083373 (J.M.H.), and University Grants Committee of the Hong Kong AoE/B-07/99 (M.C.F.). Ho Lam Tang is a Shurl and Kay Curci Foundation Fellow of the Life Sciences Research Foundation.

The authors have nothing to disclose.

Anastasis refers to the phenomenon where cells that have activated cell death pathway subsequently reverse the dying process and survive. Here, we have demonstrated that live cell imaging can be used to confirm that the same individual cells in fact can reverse apoptotic cell death process at a late stage, and then continue surviving and reproducing. Our protocols describe several optimized cell type-specific treatment conditions to induce apoptosis and allow a large proportion of the cells to undergo the reversal of apo...

Apoptosis (Greek for &#8220;falling to death&#8221;) is generally assumed to be a one-way process ending in cell suicide1-7. Genetic disruption of pro-death genes results in the survival of extra cells that would otherwise die in whole animals, including cells that have already initiated the apoptosis pathway8,9. Similarly, genetic manipulations&#160;allow&#160;healthy mammalian cells that artificially display &#8220;eat me&#8221; signals or that lose adhesiveness to their extracellular matrix to escape death by whole cell phagocytosis or entosis, respectively10,11. However,&#160;we and others have shown that without genetic manipulation normal healthy mammalian cells and cell lines can also recover from the early stages of apoptosis12-15. Using tools to track individual cells, we have further demonstrated recovery from late stages of apoptosis12,13, after cells have passed important checkpoints that typically mark the &#8220;point of no return&#8221;2-6. These checkpoints of late stage apoptosis&#160;include mitochondrial release of cytochrome c, activation of caspases, nuclear fragmentation, and formation of apoptotic bodies. We adopted a Greek compound word &#8220;anastasis&#8221;, which means &#8220;rising to life&#8221;, to describe this reversal of apoptosis at the brink of cell death2-6.
Unless the entire dying-recovery process is observed by live cell imaging, it is challenging to distinguish cells that have undergone anastasis from cells that never experienced apoptotic events. Decades of work have revealed that the morphological features of cell suicide by apoptosis are driven by evolutionarily conserved biochemical and molecular events16-19. These events promote self-destruction of cells to regulate developmental and homoeostatic processes in unicellular and multicellular organisms by eliminating damaged or dangerous cells16-19. While apoptotic cells can be readily distinguished by standardized morphological, biochemical and molecular manifestations of apoptosis1,5,6,16,20, currently there is no known marker specific to anastasis12,13. Importantly, cells that have undergone anastasis appear to be normal healthy cells, and cells that just start reversing apoptosis appear as apoptotic dying cells12,13. Thus, new tools are needed to conclude with certainty that a given surviving cell had previously experienced active apoptotic processes.
Apoptosis is generally assumed as an irreversible cascade because it is a rapid and massive destruction process. While it could take minutes to days for some cells to initiate apoptosis, once mitochondria have released apoptogenic factors such as cytochrome c into the cytosol 21,22, caspases can be activated within 5 minutes23,24, followed by cytoplasmic and nuclear condensation within 10 min25-27, and cell death shortly thereafter25-27. Activated caspases&#160;orchestrate apoptosis by cleaving and inactivating key structural and functional components for the purpose of cellular demolition2,28, such as the endonuclease inhibitor DFF45/ICAD29,30. Caspases also activate pro-apoptotic factors, such as BCL-2 family member BID, which translocates to mitochondria to promote mitochondrial release of cytochrome c31,32. Caspase activity also results in cell surface exposure of phosphatidylserine as an &#8220;eat me&#8221; signal for promoting engulfment of dying cells by macrophages or neighbor cells through phagocytosis33. Furthermore, apoptotic events render mitochondria dysfunctional, disrupting cellular bioenergetics and metabolism34,35,36. Thus, recovery from such destruction seems intuitively unlikely.
Contrary to original expectations, cells can reverse the apoptotic cell death process even at a late stage. By continuously monitoring the fate of dying cells in culture, we observed the reversibility of late stage apoptosis in a range of primary cells and cell lines12,13. Removal of the death stimulus allowed recovery from the overt features of apoptosis, such as mitochondrial fragmentation, chromatin condensation, DNA damage, plasma membrane blebbing, cell surface exposure of phosphatidylserine, release of mitochondrial cytochrome c, caspase activation, nuclear fragmentation, cell shrinkage, and formation of apoptotic bodies. These observations raise unanswered questions regarding the functions, consequences, and mechanisms of anastasis. To address these questions, a prerequisite is to reliably identify cells that have undergone anastasis. Here, we describe live microscopy&#160;methods and a caspase biosensor for&#160;detecting cells that have previously reversed late stage apoptosis and then survived.

<table border="0" cellpadding="0" cellspacing="0" width="667">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Name of Material/ Equipment</td>
			<td style="width:139px;">Company</td>
			<td style="width:127px;">Catalog Number</td>
			<td style="width:167px;">Comments/Description</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">LSM780 confocal microscopy</td>
			<td style="width:139px;">Carl Zeiss</td>
			<td style="width:127px;">/</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Glass bottom culture dish</td>
			<td style="width:139px;">MatTek Corporation</td>
			<td style="width:127px;">P35G-0-14-C</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Transparent CultFoi</td>
			<td style="width:139px;">Carl Zeiss</td>
			<td style="width:127px;">000000-1116-084</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">CO2 independent medium</td>
			<td style="width:139px;">Life Technologies</td>
			<td style="width:127px;">18045-088</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">CellTracker</td>
			<td style="width:139px;">Life Technologies</td>
			<td style="width:127px;">C34552</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Mitotracker Red CMXRos</td>
			<td style="width:139px;">Life Technologies</td>
			<td style="width:127px;">M-7512</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Hoechst 33342</td>
			<td style="width:139px;">Life Technologies</td>
			<td style="width:127px;">H1399</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:235px;">Fluorescently labeled annexin V</td>
			<td style="width:139px;">Biovision</td>
			<td style="width:127px;">K201</td>
			<td style="width:167px;"></td>
		</tr>
	</tbody>
</table>

strategies for tracking anastasis, a cell survival phenomenon that reverses apoptosis

Anastasis (Greek for &#8220;rising to life&#8221;) refers to the recovery of dying cells. Before these cells recover, they have passed through important checkpoints of apoptosis, including mitochondrial fragmentation, release of mitochondrial cytochrome c into the cytosol, activation of caspases, chromatin condensation, DNA damage, nuclear fragmentation, plasma membrane blebbing, cell shrinkage, cell surface exposure of phosphatidylserine, and formation of apoptotic bodies. Anastasis can occur when apoptotic stimuli are removed prior to death, thereby allowing dying cells to reverse apoptosis and potentially other death mechanisms. Therefore, anastasis appears to involve physiological healing processes that could also sustain damaged cells inappropriately. The functions and mechanisms of anastasis are still unclear, hampered in part by the limited tools for detecting past events after the recovery of apparently healthy cells. Strategies to detect anastasis will enable studies of the physiological mechanisms, the hazards of undead cells in disease pathology, and potential therapeutics to modulate anastasis. Here, we describe effective strategies using live cell microscopy and a mammalian caspase biosensor&#160;for identifying and tracking anastasis in mammalian cells.

To study the reversal of apoptosis, tissue culture cells are first exposed to a death stimulus to trigger apoptosis. When the cells display hallmarks of apoptosis, fresh culture medium is then applied to wash away the stimulus&#160;and then incubate the dying cells to allow recovery (Figure 1A). Here, the key question being addressed is how far individual dying cultured cells can progress towards apoptosis and still undergo anastasis. This question can be definitively answered by continuous monitoring wi...

Watch this Scientific Journal Video about Strategies for Tracking Anastasis, A Cell Survival Phenomenon that Reverses Apoptosis at JoVE.com

Strategies for Tracking Anastasis, A Cell Survival Phenomenon that Reverses Apoptosis

The term anastasis refers to the phenomenon in which dying cells reverse a cell suicide process at a late stage, repair themselves, and ultimately survive. Here we demonstrate protocols for detecting and tracking cells that undergo anastasis.

Anastasis (Greek for &#8220;rising to life&#8221;) refers to the recovery of dying cells. Before these cells recover, they have passed through important ...

strategies-for-tracking-anastasis-cell-survival-phenomenon-that

Research

JoVE Journal

Biology

17.9K Views.  Johns Hopkins University Bloomberg School of Public Health. The term anastasis refers to the phenomenon in which dying cells reverse a cell suicide process at a late stage, repair themselves, and ultimately survive. Here we demonstrate protocols for detecting and tracking cells that undergo anastasis. 

Video: Strategies for Tracking Anastasis, A Cell Survival Phenomenon that Reverses Apoptosis

Monitoring Dynamic Changes In Mitochondrial Calcium Levels During Apoptosis Using A Genetically Encoded Calcium Sensor

Dynamic changes in intracellular calcium concentration in response to various stimuli regulates many cellular processes such as proliferation, differentiation, and apoptosis1. During apoptosis, calcium accumulation in mitochondria promotes the release of pro-apoptotic factors from the mitochondria into the cytosol2. It is therefore of interest to directly measure mitochondrial calcium in living cells in situ during apoptosis. High-resolution fluorescent imaging of cells loaded with dual-excitation ratiometric and non-ratiometric synthetic calcium indicator dyes has been proven to be a reliable and versatile tool to study various aspects of intracellular calcium signaling. Measuring cytosolic calcium fluxes using these techniques is relatively straightforward. However, measuring intramitochondrial calcium levels in intact cells using synthetic calcium indicators such as rhod-2 and rhod-FF is more challenging. Synthetic indicators targeted to mitochondria have blunted responses to repetitive increases in mitochondrial calcium, and disrupt mitochondrial morphology3. Additionally, synthetic indicators tend to leak out of mitochondria over several hours which makes them unsuitable for long-term experiments. Thus, genetically encoded calcium indicators based upon green fluorescent protein (GFP)4 or aequorin5 targeted to mitochondria have greatly facilitated measurement of mitochondrial calcium dynamics. Here, we describe a simple method for real-time measurement of mitochondrial calcium fluxes in response to different stimuli. The method is based on fluorescence microscopy of 'ratiometric-pericam' which is selectively targeted to mitochondria. Ratiometric pericam is a calcium indicator based on a fusion of circularly permuted yellow fluorescent protein and calmodulin4. Binding of calcium to ratiometric pericam causes a shift of its excitation peak from 415 nm to 494 nm, while the emission spectrum, which peaks around 515 nm, remains unchanged. Ratiometric pericam binds a single calcium ion with a dissociation constant in vitro of ~1.7 &mu;M4. These properties of ratiometric pericam allow the quantification of rapid and long-term changes in mitochondrial calcium concentration. Furthermore, we describe adaptation of this methodology to a standard wide-field calcium imaging microscope with commonly available filter sets. Using two distinct agonists, the purinergic agonist ATP and apoptosis-inducing drug staurosporine, we demonstrate that this method is appropriate for monitoring changes in mitochondrial calcium concentration with a temporal resolution of seconds to hours. Furthermore, we also demonstrate that ratiometric pericam is also useful for measuring mitochondrial fission/fragmentation during apoptosis. Thus, ratiometric pericam is particularly well suited for continuous long-term measurement of mitochondrial calcium dynamics during apoptosis.

This protocol describes a method for real-time measurement of mitochondrial calcium fluxes by fluorescent imaging. The method takes advantage of a circularly permutated YFP-based dual-excitation ratiometric calcium sensor (ratiometric pericam-mt) selectively expressed in mitochondria.

Dynamic changes in intracellular calcium concentration in response to various stimuli regulates many cellular processes such as proliferation, ...

Modified Annexin V/Propidium Iodide Apoptosis Assay For Accurate Assessment of Cell Death

Studies of cellular apoptosis have been significantly impacted since the introduction of flow cytometry-based methods. Propidium iodide (PI) is widely used in conjunction with Annexin V to determine if cells are viable, apoptotic, or necrotic through differences in plasma membrane integrity and permeability1,2. The Annexin V/ PI protocol is a commonly used approach for studying apoptotic cells3. PI is used more often than other nuclear stains because it is economical, stable and a good indicator of cell viability, based on its capacity to exclude dye in living cells 4,5. The ability of PI to enter a cell is dependent upon the permeability of the membrane; PI does not stain live or early apoptotic cells due to the presence of an intact plasma membrane 1,2,6. In late apoptotic and necrotic cells, the integrity of the plasma and nuclear membranes decreases7,8, allowing PI to pass through the membranes, intercalate into nucleic acids, and display red fluorescence 1,2,9. Unfortunately, we find that conventional Annexin V/ PI protocols lead to a significant number of false positive events (up to 40%), which are associated with PI staining of RNA within the cytoplasmic compartment10. Primary cells and cell lines in a broad range of animal models are affected, with large cells (nuclear: cytoplasmic ratios &lt;0.5) showing the highest occurrence10. Herein, we demonstrate a modified Annexin V/ PI method that provides a significant improvement for assessment of cell death compared to conventional methods. This protocol takes advantage of changes in cellular permeability during cell fixing to promote entry of RNase A into cells following staining. Both the timing and concentration of RNase A have been optimized for removal of cytoplasmic RNA. The result is a significant improvement over conventional Annexin V/ PI protocols (&lt; 5% events with cytoplasmic PI staining).

An accurate method for the assessment of cell death is described. The protocol improves upon conventional Annexin V/ propidium iodide (PI) protocols, which display up to 40% false- positive events in cell lines and primary cells from a broad range of animal models.

Studies of cellular apoptosis have been significantly impacted since the introduction of flow cytometry-based methods. Propidium iodide (PI) is widely ...

Activation of Apoptosis by Cytoplasmic Microinjection of Cytochrome c

Apoptosis, or programmed cell death, is a conserved and highly regulated pathway by which cells die1. Apoptosis can be triggered when cells encounter a wide range of cytotoxic stresses. These insults initiate signaling cascades that ultimately cause the release of cytochrome c from the mitochondrial intermembrane space to the cytoplasm2. The release of cytochrome c from mitochondria is a key event that triggers the rapid activation of caspases, the key cellular proteases which ultimately execute cell death3-4.
The pathway of apoptosis is regulated at points upstream and downstream of cytochrome c release from mitochondria5. In order to study the post-mitochondrial regulation of caspase activation, many investigators have turned to direct cytoplasmic microinjection of holocytochrome c (heme-attached) protein into cells6-9. Cytochrome c is normally localized to the mitochondria where attachment of a heme group is necessary to enable it to activate apoptosis10-11. Therefore, to directly activate caspases, it is necessary to inject the holocytochrome c protein instead of its cDNA, because while the expression of cytochrome c from cDNA constructs will result in mitochondrial targeting and heme attachment, it will be sequestered from cytosolic caspases. Thus, the direct cytosolic microinjection of purified heme-attached cytochrome c protein is a useful tool to mimic mitochondrial cytochrome c release and apoptosis without the use of toxic insults which cause cellular and mitochondrial damage.
In this article, we describe a method for the microinjection of cytochrome c protein into cells, using mouse embryonic fibroblasts (MEFs) and primary sympathetic neurons as examples. While this protocol focuses on the injection of cytochrome c for investigations of apoptosis, the techniques shown here can also be easily adapted for microinjection of other proteins of interest.

Activation of Apoptosis by Cytoplasmic Microinjection of Cytochrome c

In this protocol, we describe the direct cytoplasmic microinjection of cytochrome c protein into fibroblasts and primary sympathetic neurons. This technique allows for the introduction of cytochrome c protein into the cytoplasm of cells and mimics the release of cytochrome c from mitochondria, which occurs during apoptosis.

Apoptosis, or programmed cell death, is a conserved and highly regulated pathway by which cells die1.  Apoptosis can be triggered when cells encounter a ...

Tracking Morphogenetic Tissue Deformations in the Early Chick Embryo

Embryonic epithelia undergo complex deformations (e.g. bending, twisting, folding, and stretching) to form the primitive organs of the early embryo. Tracking fiducial markers on the surfaces of these cellular sheets is a well-established method for estimating morphogenetic quantities such as growth, contraction, and shear. However, not all surface labeling techniques are readily adaptable to conventional imaging modalities and possess different advantages and limitations. Here, we describe two labeling methods and illustrate the utility of each technique. In the first method, hundreds of fluorescent labels are applied simultaneously to the embryo using magnetic iron particles. These labels are then used to quantity 2-D tissue deformations during morphogenesis. In the second method, polystyrene microspheres are used as contrast agents in non-invasive optical coherence tomography (OCT) imaging to track 3-D tissue deformations. These techniques have been successfully implemented in our lab to studythe physical mechanisms of early head fold, heart, and brain development, and should be adaptable to a wide range morphogenetic processes.

This article describes surface labeling and ex ovo tissue culture in the early chick embryo. Techniques amenable to time-lapse bright field, fluorescence, and optical coherence tomography imaging are presented. Tracking surface labels with high spatiotemporal resolution enables kinematic quantities such as morphogenetic strains (deformations) to be calculated in both two and three dimensions.

Embryonic epithelia undergo complex deformations (e.g. bending, twisting, folding, and stretching) to form the primitive organs of the early embryo. ...

Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival

Cellular water can be removed to reversibly inactivate microorganisms to facilitate storage. One such method of removal is freeze-drying, which is considered a gentle dehydration method. To facilitate cell survival during drying, the cells are often formulated beforehand. The formulation forms a matrix that embeds the cells and protects them from various harmful stresses imposed on the cells during freezing and drying. We present here a general method to evaluate the survival rate of cells after freeze-drying and we illustrate it by comparing the results obtained with four different formulations: the disaccharide sucrose, the sucrose derived polymer Ficoll PM400, and the respective polysaccharides hydroxyethyl cellulose (HEC) and hydroxypropyl methyl cellulose (HPMC), on two strains of bacteria, P. putida KT2440 and A. chlorophenolicus A6. In this work we illustrate how to prepare formulations for freeze-drying and how to investigate the mechanisms of cell survival after rehydration by characterizing the formulation using of differential scanning calorimetry (DSC), surface tension measurements, X-ray analysis, and electron microscopy and relating those data to survival rates. The polymers were chosen to get a monomeric structure of the respective polysaccharide resembling sucrose to a varying degrees. Using this method setup we showed that polymers can support cell survival as effectively as disaccharides if certain physical properties of the formulation are controlled1.

Freeze-drying is often an easy and convenient way to obtain dry products of viable bacterial cells. An issue of the process is cell survival. We detail here a procedure to investigate how cell survival during freeze-drying is influenced by the properties of the formulation used.

Cellular water can be removed to reversibly inactivate microorganisms to facilitate storage. One such method of removal is freeze-drying, which is ...

Optimized Staining and Proliferation Modeling Methods for Cell Division Monitoring using Cell Tracking Dyes

Fluorescent cell tracking dyes, in combination with flow and image cytometry, are powerful tools with which to study the interactions and fates of different cell types in vitro and in vivo.1-5 Although there are literally thousands of publications using such dyes, some of the most commonly encountered cell tracking applications include monitoring of:
<ol>
	<li>stem and progenitor cell quiescence, proliferation and/or differentiation6-8</li>
	<li>antigen-driven membrane transfer9 and/or precursor cell proliferation3,4,10-18 and</li>
	<li>immune regulatory and effector cell function1,18-21.</li>
</ol>
Commercially available cell tracking dyes vary widely in their chemistries and fluorescence properties but the great majority fall into one of two classes based on their mechanism of cell labeling. "Membrane dyes", typified by PKH26, are highly lipophilic dyes that partition stably but non-covalently into cell membranes1,2,11. "Protein dyes", typified by CFSE, are amino-reactive dyes that form stable covalent bonds with cell proteins4,16,18. Each class has its own advantages and limitations. The key to their successful use, particularly in multicolor studies where multiple dyes are used to track different cell types, is therefore to understand the critical issues enabling optimal use of each class2-4,16,18,24.
The protocols included here highlight three common causes of poor or variable results when using cell-tracking dyes. These are:
<ol>
	<li>Failure to achieve bright, uniform, reproducible labeling. This is a necessary starting point for any cell tracking study but requires attention to different variables when using membrane dyes than when using protein dyes or equilibrium binding reagents such as antibodies.</li>
	<li>Suboptimal fluorochrome combinations and/or failure to include critical compensation controls. Tracking dye fluorescence is typically 102 - 103 times brighter than antibody fluorescence. It is therefore essential to verify that the presence of tracking dye does not compromise the ability to detect other probes being used.</li>
	<li>Failure to obtain a good fit with peak modeling software. Such software allows quantitative comparison of proliferative responses across different populations or stimuli based on precursor frequency or other metrics. Obtaining a good fit, however, requires exclusion of dead/dying cells that can distort dye dilution profiles and matching of the assumptions underlying the model with characteristics of the observed dye dilution profile.</li>
</ol>
Examples given here illustrate how these variables can affect results when using membrane and/or protein dyes to monitor cell proliferation.

Successful use of cell tracking dyes to monitor immune cell function and proliferation involves several critical steps. We describe methods for: 1) obtaining bright, uniform, reproducible label-ing with membrane dyes; 2) selecting fluorochromes and data acquisition conditions; and 3) choosing a model to quantify cell proliferation based on dye dilution.

Fluorescent cell tracking dyes, in combination with flow and image cytometry, are powerful tools with which to study the interactions and fates of ...

Cell Tracking Using Photoconvertible Proteins During Zebrafish Development

Embryogenesis is a dynamic process that is best studied by using techniques that allow the documentation of developmental changes in vivo. The use of genetically-encoded fluorescent proteins has proven a valuable strategy for elucidating dynamic morphogenetic processes as they occur in the intact organism. During the past decade, the development of photoactivatable and photoconvertible fluorescent proteins has opened the possibility to investigate the fate of discrete subpopulations of tagged proteins1. Unlike photoactivatable proteins, photoconvertible fluorescent proteins (PCFPs) are readily tracked and imaged in their native emission state prior to photoconversion, making it easier to identify and select regions by optical inspection. PCFPs, such as Kaede2, KikGR3, Dendra4 and EosFP5, can be shifted from green to red upon exposure to UV or blue light due to a His-Tyr-Gly tripeptide sequence which forms a green chromophore that can be photoconverted to a red one by a light-catalyzed &beta;-elimination and subsequent extension of a &pi;-conjugated system3. PCFPs and their monomeric variants are useful tools for tracking cells6-10 and studying protein dynamics11-14, respectively. During recent years, PCFPs have been expressed in different animal model, such as zebrafish6, chicken7,8 and mouse9,10 for cell fate tracking. Here we report a protocol for cell-specific photoconversion of PCFPs in the living zebrafish embryo and further tracking of photoconverted proteins at later developmental stages. This methodology allows studying, in a tissue-specific manner, cell biological events underlying morphogenesis in the zebrafish animal model.

Here, we present a method for the photoactivated switch of photoconvertible fluorescent proteins (PCFPs) in the living zebrafish embryo and further tracking of photoconverted protein at specific time points during development. This methodology allows monitoring of cell biological events underlying different developmental processes in a live vertebrate organism.

Embryogenesis is a dynamic process that is best studied by using techniques that allow the documentation of developmental changes in vivo. The use of ...

The Tomato/GFP-FLP/FRT Method for Live Imaging of Mosaic Adult Drosophila Photoreceptor Cells

The Drosophila eye is widely used as a model for studies of development and neuronal degeneration. With the powerful mitotic recombination technique, elegant genetic screens based on clonal analysis have led to the identification of signaling pathways involved in eye development and photoreceptor (PR) differentiation at larval stages. We describe here the Tomato/GFP-FLP/FRT method, which can be used for rapid clonal analysis in the eye of living adult Drosophila. Fluorescent photoreceptor cells are imaged with the cornea neutralization technique, on retinas with mosaic clones generated by flipase-mediated recombination. This method has several major advantages over classical histological sectioning of the retina: it can be used for high-throughput screening and has proved an effective method for identifying the factors regulating PR survival and function. It can be used for kinetic analyses of PR degeneration in the same living animal over several weeks, to demonstrate the requirement for specific genes for PR survival or function in the adult fly. This method is also useful for addressing cell autonomy issues in developmental mutants, such as those in which the establishment of planar cell polarity is affected.

The Tomato/GFP-FLP/FRT Method for Live Imaging of Mosaic Adult Drosophila Photoreceptor Cells

The Tomato/GFP-FLP/FRT method involves visualizing mosaic photoreceptor cells in living Drosophila. It can be used to follow individual photoreceptor cell fates in the retina for days or weeks. This method is ideal for studies of retinal degeneration and neurodegenerative diseases or photoreceptor cell development.

The Drosophila eye is widely used as a model  for studies of development and neuronal degeneration. With the powerful mitotic  recombination technique, ...

A Guide to Modern Quantitative Fluorescent Western Blotting with Troubleshooting Strategies

The late 1970s saw the first publicly reported use of the western blot, a technique for assessing the presence and relative abundance of specific proteins within complex biological samples. Since then, western blotting methodology has become a common component of the molecular biologists experimental repertoire. A cursory search of PubMed using the term &#8220;western blot&#8221; suggests that in excess of two hundred and twenty thousand published manuscripts have made use of this technique by the year 2014. Importantly, the last ten years have seen technical imaging advances coupled with the development of sensitive fluorescent labels which have improved sensitivity and yielded even greater ranges of linear detection. The result is a now truly Quantifiable Fluorescence based Western Blot (QFWB) that allows biologists to carry out comparative expression analysis with greater sensitivity and accuracy than ever before. Many &#8220;optimized&#8221; western blotting methodologies exist and are utilized in different laboratories. These often prove difficult to implement due to the requirement of subtle but undocumented procedural amendments. This protocol provides a comprehensive description of an established and robust QFWB method, complete with troubleshooting strategies.

The advancement of western blotting using fluorescence has allowed detection of subtle changes in protein expression enabling quantitative analyses. Here we describe a robust methodology for detection of a range of proteins across a variety of species and tissue types. A strategy to overcome common technical problems is also provided.

The late 1970s saw the first publicly reported use of the western blot, a technique for assessing the presence and relative abundance of specific proteins ...

Assessment of Selective mRNA Translation in Mammalian Cells by Polysome Profiling

Regulation of protein synthesis represents a key control point in cellular response to stress. In particular, discreet RNA regulatory elements were shown to allow to selective translation of specific mRNAs, which typically encode for proteins required for a particular stress response. Identification of these mRNAs, as well as the characterization of regulatory mechanisms responsible for selective translation has been at the forefront of molecular biology for some time. Polysome profiling is a cornerstone method in these studies. The goal of polysome profiling is to capture mRNA translation by immobilizing actively translating ribosomes on different transcripts and separate the resulting polyribosomes by ultracentrifugation on a sucrose gradient, thus allowing for a distinction between highly translated transcripts and poorly translated ones. These can then be further characterized by traditional biochemical and molecular biology methods. Importantly, combining polysome profiling with high throughput genomic approaches allows for a large scale analysis of translational regulation.

The ability of cells to adapt to stress is crucial for their survival. Regulation of mRNA translation is one such adaptation strategy, providing for rapid regulation of the proteome. Here, we provide a standardized polysome profiling protocol to identify specific mRNAs that are selectively translated under stress conditions.

Regulation of protein synthesis represents a key control point in cellular response to stress. In particular, discreet RNA regulatory elements were shown ...

Strategies for Tracking Anastasis, A Cell Survival Phenomenon that Reverses Apoptosis

Podsumowanie

Przeglądaj więcej filmów

Rozdziały w tym wideo

Monitoring Dynamic Changes In Mitochondrial Calcium Levels During Apoptosis Using A Genetically Encoded Calcium Sensor

Modified Annexin V/Propidium Iodide Apoptosis Assay For Accurate Assessment of Cell Death

Activation of Apoptosis by Cytoplasmic Microinjection of Cytochrome c

Tracking Morphogenetic Tissue Deformations in the Early Chick Embryo

Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival

Optimized Staining and Proliferation Modeling Methods for Cell Division Monitoring using Cell Tracking Dyes

Cell Tracking Using Photoconvertible Proteins During Zebrafish Development

The Tomato/GFP-FLP/FRT Method for Live Imaging of Mosaic Adult Drosophila Photoreceptor Cells

A Guide to Modern Quantitative Fluorescent Western Blotting with Troubleshooting Strategies

Assessment of Selective mRNA Translation in Mammalian Cells by Polysome Profiling