This work is financially supported by the Ministry of Science and Technology, Taiwan (Contract no. MOST 103-2113-M-001 -003 -MY2) and the Research Program on Nanoscience and Nanotechnology, Academia Sinica, Taiwan.

1. Design and Fabrication of the MDF Chip
<ol>
	<li>Draw an individual acrylic layer pattern using commercial software, such as AutoCAD, and save the pattern.
	<ol>
		<li>Review the design of the four-layer acrylic sheet pattern in Figure 1A and confirm the inter-layer connections.</li>
	</ol>
	</li>
	<li>Fabricate all the acrylic sheets and the double-sided tape by laser ablation using a CO2 laser scriber (Figures 1B, 2A, and 2B).16
	<ol>
		<li>Turn on the laser scriber and connect the machine to the controlling laptop.</li>
		<li>Run the commercial software and open the pattern designed in step 1.1 by clicking &#34;designed pattern file.&#34;</li>
		<li>Place a piece of blank acrylic sheet or double-sided tape on the X-Y-Z stage of the laser scriber.</li>
		<li>Set the focus of the laser beam on the surface of the acrylic sheet or double-sided tape with an auto-alignment stick provided by the manufacturer of the laser scriber.</li>
		<li>Send the designed pattern to the laser scriber for direct machining of the acrylic sheet or double-sided tape.</li>
	</ol>
	</li>
	<li>Remove the protective paper from the acrylic sheets using forceps and blow the surface clean with nitrogen gas.</li>
	<li>Stack the acrylic sheets and bond them together under a pressure of 2&#160;kg/cm2 in a thermal bonder for 45 min at 110 &#176;C to form the flow/electrical stimulation channel assembly.</li>
	<li>Prepare the microscope cover glass as the cell culture substrate in the chip.
	<ol>
		<li>Put the cover glass into a staining jar and fill the jar with a ten-fold dilution of the detergent listed in the material list.</li>
		<li>Put the cover glass and staining jar in an ultrasonic steri-cleaner and clean the cover glass for 15 min.</li>
		<li>Pour the diluted detergent out of the staining jar, refill the jar with distilled water, and repeat step 1.5.2 3 times.</li>
		<li>Dry the cleaned cover glass by blowing it with nitrogen gas before adhering it to the double-sided tape.</li>
	</ol>
	</li>
	<li>Adhere the cleaned cover glass to the flow/electrical stimulation channel assembly with the double-sided tape patterned in step 1.2.</li>
	<li>Adhere 13 pieces of acrylic adaptors to the individual openings in Layer 1 of the MDF chip assembly with super glue. The MDF chip assembly is then complete (Figure 2D).</li>
	<li>Sterilize the complete MDF chip assembly with 30 min of UV irradiation prior to use.</li>
</ol>
2. Setup of the Salt Bridge Network of the MDF Chip
<ol>
	<li>Prior to use, sterilize all the plastic tubes, finger-tight nuts, and microcentrifuge tubes shown in Figure 3B by setting a holding time of 15 min at 121 &#176;C in the autoclave.</li>
	<li>Connect the fluoroplastic tubes (Figure 3B-i) to the MDF chip assembly via the medium inlet and outlet adaptors shown in Figure 1A.</li>
	<li>Connect the Luer taper of the medium inlet and outlet plastic tubes in Figure 3B-i to the 3-way stopcocks.</li>
	<li>Take 2.5 ml of CO2-equilibrated phosphate-buffered saline (PBS) using a 3 ml syringe and connect the syringe to the 3-way stopcock of the inlet plastic tube. Connect an empty 3 ml syringe to the 3-way stopcock of the outlet plastic tube. The two syringes are thus interconnected through the MDF chip. 
	NOTE: Incubate the PBS in the 37 &#176;C 5%-CO2 cell culture incubator O/N to obtain CO2-equilibrated PBS.</li>
	<li>Seal the openings of the blue and the green adaptors (Figure 1A) on the Layer 1 PMMA sheet with white solid finger-tight nuts (Figure 3B-iii).</li>
	<li>Fill the salt bridge channels and culture chambers with the CO2-equilibrated PBS in the syringe described in setup step 2.4. Avoid the formation of bubbles.</li>
	<li>Next, put the CO2-equilibrated PBS-containing MDF chip in the 37 &#176;C 5%-CO2 cell culture incubator for O/N incubation. This allows the dissolved air in the double-sided tape to form bubbles in the chambers.</li>
	<li>Flush away the bubbles in the channels by a rapid PBS flow in the channel using the two syringes. Pump the PBS back and forth if necessary.</li>
	<li>Drain the PBS in the channels via the 3-way stopcock connected to the medium outlet tube.</li>
	<li>Using a new 3-ml syringe, take 2.5 ml of CO2-equilibrated Dulbecco&#39;s Modified Eagle Medium (DMEM) (see step 3.5), and replace the syringe connected to the inlet with the new one. Refill the channels with the medium.</li>
	<li>Preparation of the salt bridge network.
	<ol>
		<li>Temporally remove the solid nuts (Figure 3B-iii) on the green adaptors (Figure 1A) and inject 3% hot (&#62;70 &#176;C) agarose into the salt bridge channel through the opening in the green adaptors (Figure 1A). 
		NOTE: Preparation of hot agarose: Dissolve 1.5 g of agarose powder in 50 ml of PBS. Sterilize by setting a holding time of 20 min at 121 &#176;C in the autoclave.</li>
		<li>Stop injecting the agarose when the liquid fills three-quarters of the length of the salt bridge channel.</li>
		<li>Seal the pores on the green adaptors (Figure 1A) by screwing the solid nuts (Figure 3B-iii) after the agarose injection.</li>
		<li>Replace the solid nuts on the blue adaptors (Figure 1A) with the translucent tubular finger-tight nuts (Figure 3B).</li>
		<li>Load the 3% pre-heated agarose into the tubular nuts (Figure 3B-iv).</li>
		<li>Embed the Ag/AgCl electrodes (Figure 3B-v) into the tubular nuts (Figure 3B-iv) before the solidification of the agarose.</li>
	</ol>
	</li>
	<li>After completing the setup of the salt bridge network, inject the CL1-5 lung cancer cells into the culture chambers, one chamber at a time.</li>
</ol>
3. Preparation of Cancer Cells and Set Up for Electrotactic Experiment
<ol>
	<li>Regular culture of lung cancer cell line CL1-5.
	<ol>
		<li>Culture the CL1-5 lung cancer cells, obtained from Prof. Pan-Chyr Yang,17 in the complete medium in a 75T cell culture flask at 37 &#176;C in a 5% CO2 atmosphere. The complete medium is composed of DMEM and 10% fetal bovine serum (FBS). Sub-culture the cells every 3 to 4 days. The cells used for performing electrotaxis experiments are less than 25 passages from the original source.</li>
	</ol>
	</li>
	<li>Add 2 ml of 0.25% trypsin buffer to the exponentially growing CL1-5 cells and incubate for 2 min in the 37 &#176;C 5%-CO2 cell culture incubator for cell detachment.</li>
	<li>Terminate the detachment process with 6 ml of 10% FBS DMEM and centrifuge the cells at 300 g for 5 min at RT. Then discard the medium and suspend the cell pellet with 5 ml of PBS.</li>
	<li>Count the number of cells in the PBS. Then take 1 x 106 cells and centrifuge at 300 g for 5 min at RT.</li>
	<li>Discard the PBS. Suspend the cells with pre-warmed CO2-equilibrated DMEM and adjust the cell density to be 1 &#215; 106 cells/ml. 
	NOTE: Incubate the complete medium in the 37 &#176;C 5%-CO2 cell culture incubator O/N to obtain the CO2-equilibrated DMEM.</li>
</ol>
4. Set Up for Electrotactic Experiment
<ol>
	<li>From the outlet of the MDF chip, inject 0.3 ml, 1 &#215; 106/ml, of the cells into the chip.</li>
	<li>Incubate the cell-seeded MDF chip in the cell culture incubator (set at 37 &#176;C and 5% CO2) for 2-4 hr.</li>
	<li>Setup of MDF microfluidic system.
	<ol>
		<li>Install the MDF microfluidic system onto a transparent indium tin oxide glass (ITO) heater. Measure the temperature of the MDF chip with a K-type thermocouple clipped between the MDF chip and the ITO glass. Control the ITO heater with a proportional-integral-derivative (PID) controller. Set the MDF microfluidic system incubation temperature to 37 &#176;C with the PID controller. 
		NOTE: The fabrication of the ITO heater and the setup of the cell culture heating system are described in previous reports.18,19</li>
		<li>Mount the temperature-controlled MDF chip assembly on the computer-controlled X-Y-Z motorized stage on an inverted microscope. The usage of the motorized stage is described in step 5.1. Pump the complete medium into the culture chambers through the inlets with a four-channel syringe pump.</li>
	</ol>
	</li>
	<li>Pump the complete medium into the MDF chip at a flow rate of 20 &#956;l/hr. The culture waste from the outlets is collected in the microcentrifuge tubes (shown as &#34;waste&#34; in Figure 3A).</li>
	<li>Incubate the cells for another 16-18 hr at 37 &#176;C in the MDF chip.</li>
	<li>To replace the medium, pump the medium containing 50, 25, 5, and 0 &#181;M kinase inhibitor, respectively, into each culture chamber at a flow rate of 20 &#956;l/min for 10 min. 
	NOTE: Prepare a 10 mM stock solution of the Rho-associated protein kinase inhibitor Y27632 by adding 3 ml of sterile water to the 10.6 mg kinase inhibitor. Dilute the 10 mM stock solution to 50, 25, and 5 &#181;M, respectively, using 10% FBS DMEM medium.</li>
	<li>Incubate the cells in the kinase inhibitor for another 60 min at 37 &#176;C. Set the medium flow rate to 20 &#956;l/hr. Use the same culture temperature and flow rate described above in later steps.</li>
	<li>Use electrical wires to connect a DC power supply to the MDF chip via the Ag/AgCl electrodes on the chip.</li>
	<li>Serially connect an ammeter in the electric circuit. Use the ammeter to monitor the electric current in the MDF chip.</li>
	<li>Turn on the DC power supply and set the ammeter current to 86.94 &#956;A by adjusting the power supply voltage to between 15 and 19 V. 
	NOTE: Considering Ohm&#39;s law, E = I/(&#963;Aeff), where I is the electric current flowing through the bulk material, i.e., the culture medium in the electrotactic chamber, &#963; (= 1.38 &#937;&#8722;1m&#8722;1) is the conductivity of the culture medium, Aeff (= 0.21 mm2 for a 3 mm width &#215; 0.07 mm height) is the effective cross-sectional area of the electrotactic chamber, and the electric current (I) required to generate a 300 mV/mm EF in the MDF chip is 86.94 &#956;A.</li>
</ol>
5. Acquisition and Analysis of Cell Images
<ol>
	<li>Control the motorized stage using a MATLAB GUI program. With the MDF microfluidic system mounted on the microscope, move the chip to the observation regions using the motorized stage.</li>
	<li>Record cell images using a digital single-lens reflex (SLR) camera mounted on the microscope.</li>
	<li>Take microscopic images using a 4X objective lens at intervals of 15 min for 2 hr.</li>
	<li>Cell migration analysis.
	<ol>
		<li>Run NIH ImageJ 1.47 V.</li>
		<li>Analyze the distance from the initial to the final positions of the cell&#39;s centroid.</li>
		<li>Go to &#34;File&#34;&#8594;&#34;Import&#34;&#8594;&#34;Image Sequence,&#34; and import nine images for cell migration analysis. The first image is the result of zero time, and the last image is the result of 120 min.</li>
		<li>Go to &#34;Analyze&#34;&#8594;&#34;Set Measurements&#34; and check the box next to &#34;Centroid&#34;</li>
		<li>Click on the &#34;Freehand Selections&#34; icon.</li>
		<li>Depict the edge of the selected cells in the first image.</li>
		<li>Go to &#34;Edit&#34;&#8594;&#34;Selection&#34;&#8594;&#34;Add to Manager&#34;</li>
		<li>Go to the ninth image and depict the edge of the same cells selected on the first image. The cell positions can be traced using the second to eighth images.</li>
		<li>Go to &#34;Edit&#34;&#8594;&#34;Selection&#34;&#8594;&#34;Add to Manager&#34;</li>
		<li>Repeat steps 5.4.5 to 5.4.9 to collect data from 90 to 100 cells.</li>
		<li>Go to &#34;Analyze&#34;&#8594;&#34;Measure&#34; to obtain the result of the initial and final positions of the selected cells. 
		NOTE: The migration speed is defined as the average cell movement length per hr. The directedness is defined as cosine, where is the angle between the vector of the dcEF (from anode to cathode) and the vector from the starting point of a cell to its final position. The directedness is &#8722;1 for cells migrating toward the anode and +1 for cells migrating toward the cathode. For a group of randomly migrating cells, the directedness is 0.2</li>
	</ol>
	</li>
</ol>

<ol>
	<li>McCaig, C. D., Rajnicek, A. M., Song, B., Zhao, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlling+cell+behavior+electrically:+current+views+and+future+potential.">Controlling cell behavior electrically: current views and future potential.</a> Physiol Rev. 85, 943-978 (2005).</li><li>Djamgoz, M. B. A., Mycielska, M., Madeja, Z., Fraser, S. P., Korohoda, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Directional+movement+of+rat+prostate+cancer+cells+in+direct-current+electric+field:+involvement+of+voltagegated+Na++channel+activity.">Directional movement of rat prostate cancer cells in direct-current electric field: involvement of voltagegated Na+ channel activity.</a> J Cell Sci. 114, 2697-2705 (2001).</li><li>Pu, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=EGF+receptor+signaling+is+essential+for+electric-field-directed+migration+of+breast+cancer+cells.">EGF receptor signaling is essential for electric-field-directed migration of breast cancer cells.</a> J Cell Sci. 120, 3395-3403 (2007).</li><li>Huang, C. W., Cheng, J. Y., Yen, M. H., Young, T. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrotaxis+of+lung+cancer+cells+in+a+multiple-electric-field+chip.">Electrotaxis of lung cancer cells in a multiple-electric-field chip.</a> Biosens Bioelectron. 24, 3510-3516 (2009).</li><li>Huang, C. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+expression+of+human+lung+cancer+cell+line+CL1-5+in+response+to+a+direct+current+electric+field.">Gene expression of human lung cancer cell line CL1-5 in response to a direct current electric field.</a> PLoS One. 6, e25928 (2011).</li><li>Sun, Y. S., Peng, S. W., Lin, K. H., Cheng, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrotaxis+of+lung+cancer+cells+in+ordered+three-dimensional+scaffolds.">Electrotaxis of lung cancer cells in ordered three-dimensional scaffolds.</a> Biomicrofluidics. 6, 14102-1410214 (2012).</li><li>Tsai, H. F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+EGFR+and+RTK+signaling+in+the+electrotaxis+of+lung+adenocarcinoma+cells+under+direct-current+electric+field+stimulation.">Evaluation of EGFR and RTK signaling in the electrotaxis of lung adenocarcinoma cells under direct-current electric field stimulation.</a> PLoS One. 8, e73418 (2013).</li><li>Hou, H. S., Tsai, H. F., Chiu, H. T., Cheng, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+chemical+and+electrical+stimulation+on+lung+cancer+cells+using+a+multichannel-dual-electric-field+chip.">Simultaneous chemical and electrical stimulation on lung cancer cells using a multichannel-dual-electric-field chip.</a> Biomicrofluidics. 8, (2014).</li><li>Faupel, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electropotential+evaluation+as+a+new+technique+for+diagnosing+breast+lesions.">Electropotential evaluation as a new technique for diagnosing breast lesions.</a> Eur J Radiol. 24, 33-38 (1997).</li><li>Szatkowski, M., Mycielska, M., Knowles, R., Kho, A. L., Djamgoz, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrophysiological+recordings+from+the+rat+prostate+gland+in+vitro:+identified+single-cell+and+transepithelial+(lumen)+potentials.">Electrophysiological recordings from the rat prostate gland in vitro: identified single-cell and transepithelial (lumen) potentials.</a> BJU Int. 86, 1068-1075 (2000).</li><li>McCaig, C. D., Song, B., Rajnicek, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrical+dimensions+in+cell+science.">Electrical dimensions in cell science.</a> J Cell Sci. 122, 4267-4276 (2009).</li><li>Das, T., Maiti, T. K., Chakraborty, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Traction+force+microscopy+on-chip:+shear+deformation+of+fibroblast+cells.">Traction force microscopy on-chip: shear deformation of fibroblast cells.</a> Lab Chip. 8, 1308-1318 (2008).</li><li>Lin, F., Butcher, E. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=T+cell+chemotaxis+in+a+simple+microfluidic+device.">T cell chemotaxis in a simple microfluidic device.</a> Lab Chip. 6, 1462-1469 (2006).</li><li>Li, J., Zhu, L., Zhang, M., Lin, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+device+for+studying+cell+migration+in+single+or+co-existing+chemical+gradients+and+electric+fields.">Microfluidic device for studying cell migration in single or co-existing chemical gradients and electric fields.</a> Biomicrofluidics. 6, 24121-2412113 (2012).</li><li>Tsai, H. F., Peng, S. W., Wu, C. Y., Chang, H. F., Cheng, J. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrotaxis+of+oral+squamous+cell+carcinoma+cells+in+a+multiple-electric-field+chip+with+uniform+flow+field.">Electrotaxis of oral squamous cell carcinoma cells in a multiple-electric-field chip with uniform flow field.</a> Biomicrofluidics. 6, 34116 (2012).</li><li>Cheng, J. Y., Wei, C. W., Hsu, K. H., Young, T. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+laser+micromachining+and+universal+surface+modification+of+PMMA+for+device+development.">Direct-write laser micromachining and universal surface modification of PMMA for device development.</a> Sensors and Actuators B: Chemical. 99, 186-196 (2004).</li><li>Chu, Y. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Selection+of+invasive+and+metastatic+subpopulations+from+a+human+lung+adenocarcinoma+cell+line.">Selection of invasive and metastatic subpopulations from a human lung adenocarcinoma cell line.</a> Am J Respir Cell Mol Biol. 17, 353-360 (1997).</li><li>Cheng, J. Y., Yen, M. H., Kuo, C. T., Young, T. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+transparent+cell-culture+microchamber+with+a+variably+controlled+concentration+gradient+generator+and+flow+field+rectifier.">A transparent cell-culture microchamber with a variably controlled concentration gradient generator and flow field rectifier.</a> Biomicrofluidics. 2, 24105 (2008).</li><li>Cheng, J. -. Y., Yen, M. -. H., Hsu, W. -. C., Jhang, J. -. H., Young, T. -. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ITO+patterning+by+a+low+power+Q-switched+green+laser+and+its+use+in+the+fabrication+of+a+transparent+flow+meter.">ITO patterning by a low power Q-switched green laser and its use in the fabrication of a transparent flow meter.</a> Journal of Micromechanics and Microengineering. 17, 2316 (2007).</li><li>Pu, J., Zhao, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Golgi+polarization+in+a+strong+electric+field.">Golgi polarization in a strong electric field.</a> J Cell Sci. 118, 1117-1128 (2005).</li><li>Zhao, M., Bai, H., Wang, E., Forrester, J. V., McCaig, C. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrical+stimulation+directly+induces+pre-angiogenic+responses+in+vascular+endothelial+cells+by+signaling+through+VEGF+receptors.">Electrical stimulation directly induces pre-angiogenic responses in vascular endothelial cells by signaling through VEGF receptors.</a> J Cell Sci. 117, 397-405 (2004).</li><li>Yao, L., Shanley, L., McCaig, C., Zhao, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Small+applied+electric+fields+guide+migration+of+hippocampal+neurons.">Small applied electric fields guide migration of hippocampal neurons.</a> J Cell Physiol. 216, 527-535 (2008).</li></ol>

The authors declare that they have no competing financial interests.

We found the process of adhering acrylic adaptors onto Layer 1 of the MDF chip to be tricky. The application of just 1 to 2 &#956;l of super glue is sufficient to firmly adhere the adaptor onto the MDF chip. Larger amounts of glue resulted in an incomplete polymerization of the super glue and failure to adhere. Once the acrylic adaptors were firmly adhered onto the MDF chip, liquid leakage in the microfluidic system rarely occurred. In addition, O/N&#160;incubation inside the vacuum chamber helped to remove the air trapp...

The behavior of adherent cells moving toward an anode or cathode under a direct current electric-field (dcEF) is referred to as electrotaxis. The electrotactic behavior of cells plays a significant role in embryogenesis, nerve regeneration, and wound healing.1 Tumor cells such as rat prostate cancer cells,2 breast cancer cells,3 and lung adenocarcinoma cells4-8 have shown electrotactic movement under an applied dcEF. The physiological EF has been measured in gland tissues.9,10 Electrotaxis has also been reported in gland-associated tumor cells.2,3 Taken together, the electrotaxis of cancer cells is considered to be a metastasis factor.11 Controlling the electrical guidance of cancer cells under dcEF may be a potential approach for the future treatment of cancer. However, today, the detailed molecular mechanism of electrotaxis remains controversial. Therefore, an investigation of the influence of electrical stimulation on cancer cell migration can facilitate the development of strategies for cancer treatment.
Recently, bio-microfluidic devices have been fabricated for studying cellular responses to flow shear force,12 chemical gradients,13 and electrical stimuli4 in vitro. The fabrication of bio-microfluidic devices using polydimethylsiloxane (PDMS) or polymethylmethacrylate (PMMA, also known as acrylic) has successfully reduced the failure rate of such experiments. Moreover, using acrylic-based microfluidic devices as a prototype for investigating biological subjects is simpler than using PDMS chips. Various functions in acrylic-based devices have been developed for electrotaxis study. However, none of the previous designs are able to simultaneously test the effects of various chemical conditions and the electric-field on cells for electrotaxis study. Thus, we developed a microfluidic device-the multichannel dual-electric-field (MDF) chip-containing four independent culture channels and eight different experimental conditions in one chip.
The acrylic-based MDF chip, first reported by Hou et al.,8 integrates electrical stimulation and several chemically isolated channels. These chemically isolated channels can be used to culture different types of cells in one experiment. The dcEF in the channels is produced by an electrical power supply. Two independent electric fields, one with applied electric-field strength (EFS) and another with 0 EFS, are conducted in each chemically isolated channel. In this way, the chip provides better-controlled coexisting EF and chemical stimulation. Furthermore, results from the numerical simulation of the chemical diffusion inside the MDF chip indicate that no cross contamination occurred between the channels after a 24 hr experimental period.8
Compared to the device reported by Li et al.,14 the MDF chip provides a larger culture area, which allows for further biochemical analysis of the electrically stimulated cells. Additionally, with the MDF chip&#39;s larger observation area, more cells can be observed in the test, so the analysis of migration speed or directedness of the electrically stimulated cells is more accurate. The single-channel chip designs of previous studies reported by Huang et al.4 and Tsai et al.15 allow only one type of cell or chemical to be tested. However, the MDF chip can be used to investigate the effects of various chemicals on electrotaxis, as well as the effects of electrical stimulation on different types of cells. In other words, the MDF chip allows for the efficient study of chemical dose dependencies.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr >
			<td >Reagent</td>
			<td ></td>
			<td ></td>
			<td ></td>
		</tr>
		<tr >
			<td >DMEM medium</td>
			<td >Gibco,Invitrogen, USA</td>
			<td >12800-017</td>
			<td></td>
		</tr>
		<tr >
			<td >Fetal Bovine Serum</td>
			<td >Gibco,Invitrogen, USA</td>
			<td >16000-044</td>
			<td></td>
		</tr>
		<tr >
			<td >Trypsin</td>
			<td >Gibco,Invitrogen, USA</td>
			<td >25200-072</td>
			<td></td>
		</tr>
		<tr >
			<td >PBS</td>
			<td >Basic Life</td>
			<td >BL2651</td>
			<td></td>
		</tr>
		<tr >
			<td >Y-27632 (hydrochloride)</td>
			<td >Cayman Chemical Co</td>
			<td >10005583</td>
			<td></td>
		</tr>
		<tr >
			<td >agarose</td>
			<td >LONZO, USA</td>
			<td >SeaKem LE AGAROSE</td>
			<td></td>
		</tr>
		<tr >
			<td >syringe</td>
			<td>Terumo</td>
			<td>3 ml with Luer taper</td>
			<td></td>
		</tr>
		<tr >
			<td >3-way stopcock</td>
			<td>Nipro</td>
			<td >with Luer taper</td>
			<td></td>
		</tr>
		<tr >
			<td >PMMA (acrylic)</td>
			<td >HiShiRon Industries CO., Ltd, Taiwan</td>
			<td ></td>
			<td >thickness 1mm, 2mm</td>
		</tr>
		<tr >
			<td >acrylic adaptor</td>
			<td >KuanMin Technology Co., Ltd, Taichung, Taiwan</td>
			<td >1/4-28 port, 10x10x6 mm</td>
			<td>customized</td>
		</tr>
		<tr >
			<td >nut</td>
			<td >Thermo Fisher Scientific Inc.</td>
			<td >UPCHURCH:P-206x, P-200x, F120x, P-659, P-315x</td>
			<td></td>
		</tr>
		<tr >
			<td >Microscope cover glass</td>
			<td >Deckgl&#228;ser, Germany</td>
			<td >24x60 mm</td>
			<td></td>
		</tr>
		<tr >
			<td >double-sided tape</td>
			<td >3M</td>
			<td >PET 8018</td>
			<td></td>
		</tr>
		<tr >
			<td >super glue</td>
			<td >3M</td>
			<td >Scotch Liquid Plus Super Glue</td>
			<td></td>
		</tr>
		<tr >
			<td >Teflon tube</td>
			<td >HENG YI ENTERPRISE CO., LTD., Taiwan</td>
			<td >UPTB_06, DUPONT TEFLON BRAND RESIN FEP TUBING</td>
			<td>outer diameter 1/16 in., inner diameter 0.03 in.; Upchurch Scienti&#64257;c</td>
		</tr>
		<tr >
			<td >TFD4 detergent</td>
			<td >Franklab, France</td>
			<td >TFD4</td>
			<td></td>
		</tr>
		<tr >
			<td >ultrasonic steri cleaner</td>
			<td >LEO ULTRASONIC CO., LTD., Taiwan</td>
			<td ></td>
			<td></td>
		</tr>
		<tr >
			<td >Thermo bonder</td>
			<td >KuanMin Technology Co., Ltd, Taichung, Taiwan</td>
			<td>customized</td>
			<td></td>
		</tr>
		<tr >
			<td >CO2 laser scriber</td>
			<td >LTT group, Taiwan</td>
			<td >ISL-II</td>
			<td></td>
		</tr>
		<tr >
			<td >indium tin oxide glass (ITO glass)</td>
			<td >AimCore Technology Co., Ltd</td>
			<td >TN/STN, &#8806;10&#937;</td>
			<td></td>
		</tr>
		<tr >
			<td >proportional-integral-derivative (PID) controller</td>
			<td>JETEC Electronics Co., Japen</td>
			<td >TTM-J40-R-AB,</td>
			<td></td>
		</tr>
		<tr >
			<td >K-type thermocouple</td>
			<td >TECPEL</td>
			<td >TPK-02A</td>
			<td></td>
		</tr>
		<tr >
			<td >4-channel syringe pump</td>
			<td >KdScientific, USA</td>
			<td >250P</td>
			<td></td>
		</tr>
		<tr >
			<td >DC power supply</td>
			<td >GWInstek, Taiwan</td>
			<td ></td>
			<td></td>
		</tr>
		<tr >
			<td >X-Y-Z motor stage</td>
			<td >TanLian, E-O Co. Ltd., Taiwan</td>
			<td>customized</td>
			<td></td>
		</tr>
		<tr >
			<td >inverted microscope</td>
			<td >Olympus, Japan</td>
			<td >CKX41</td>
			<td></td>
		</tr>
		<tr >
			<td >digital SLR camera</td>
			<td >Canon, Japan</td>
			<td >60D</td>
			<td></td>
		</tr>
	</tbody>
</table>

electrotaxis studies of lung cancer cells using a multichannel dual-electric-field microfluidic chip

The behavior of directional cell migration under a direct current electric-field (dcEF) is referred to as electrotaxis. The significant role of physiological dcEF in guiding cell movement during embryo development, cell differentiation, and wound healing has been demonstrated in many studies. By applying microfluidic chips to an electrotaxis assay, the investigation process is shortened and experimental errors are minimized. In recent years, microfluidic devices made of polymeric substances (e.g., polymethylmethacrylate, PMMA, or acrylic) or polydimethylsiloxane (PDMS) have been widely used in studying the responses of cells to electrical stimulation. However, unlike the numerous steps required to fabricate a PDMS device, the simple and rapid construction of the acrylic micro&#64258;uidic chip makes it suitable for both device prototyping and production. Yet none of the reported devices facilitate the efficient study of the simultaneous chemical and dcEF effects on cells. In this report, we describe our design and fabrication of an acrylic-based multichannel dual-electric-field (MDF) chip to investigate the concurrent effect of chemical and electrical stimulation on lung cancer cells. The MDF chip provides eight combinations of electrical/chemical stimulations in a single test. The chip not only greatly shortens the required experimental time but also increases accuracy in electrotaxis studies.

Fabrication and assembly of the MDF device
A schematic diagram of the acrylic-based MDF chip is shown in Figure 1A. Four acrylic sheets, one cover glass, 13 acrylic adaptors, and a piece of double-sided tape were used in the assembly of the completed MDF chip (Figure 2D). There are only four independent culture channels in the MDF device. However, the on-chip salt bridge network...

Watch this Scientific Journal Video about Electrotaxis Studies of Lung Cancer Cells using a Multichannel Dual-electric-field Microfluidic Chip at JoVE.com

Electrotaxis Studies of Lung Cancer Cells using a Multichannel Dual-electric-field Microfluidic Chip

Many microfluidic devices have been developed for use in the study of electrotaxis. Yet, none of these chips allows the efficient study of the simultaneous chemical and electric-field (EF) effects on cells. We developed a polymethylmethacrylate-based device that offers better-controlled coexisting EF and chemical stimulation for use in electrotaxis research.

The behavior of directional cell migration under a direct current electric-field (dcEF) is referred to as electrotaxis. The significant role of ...

electrotaxis-studies-lung-cancer-cells-using-multichannel-dual

Research

JoVE Journal

Bioengineering

8.6K Views.  Academia Sinica. Many microfluidic devices have been developed for use in the study of electrotaxis. Yet, none of these chips allows the efficient study of the simultaneous chemical and electric-field (EF) effects on cells. We developed a polymethylmethacrylate-based device that offers better-controlled coexisting EF and chemical stimulation for use in electrotaxis research.