The ubiquitin variant technology was devised in the laboratory of Dr. Sachdev Sidhu (University of Toronto). WZ is currently a CIFAR Azrieli Global Scholar in the Humans &#38; The Microbiome Program. This research was funded by NSERC Discovery Grants awarded to WZ (RGPIN-2019-05721).

1. Reagent preparation
<ol>
	<li>PBS (phosphate buffered saline): Mix 50 mL of 10x PBS solution with 450 mL of ultrapure H2O. Sterilize by filtration and store at 4 &#176;C or room temperature (~20-25 &#176;C).</li>
	<li>10% BSA (bovine serum albumin): Slowly add 1 g of BSA to 7 mL of ultrapure H2O and mix until fully dissolved (no clumps). Top up with ultrapure H2O until the final volume is 10 mL. Sterilize by filtration and store at 4 &#176;C.</li>
	<li>PB buffer (PBS supplemented with 1% BSA): Slowly add 5 g of BSA to 400 mL of ultrapure H2O and 50 mL of PBS and mix until fully dissolved (no clumps). Top up with ultrapure H2O until the final volume is 500 mL. Sterilize by filtration and store at 4 &#176;C.</li>
	<li>PBT buffer (PBS supplemented with 1% BSA and 0.05% Tween 20): Slowly add 5 g of BSA to 400 mL of ultrapure H2O and 50 mL of PBS and mix until fully dissolved (no clumps). Add 250 &#181;L of Tween 20. Top up with ultrapure H2O until the final volume is 500 mL. Sterilize by filtration and store at 4 &#176;C.</li>
	<li>PT buffer (PBS supplemented with 0.05% Tween 20): Mix 1 mL of Tween 20 with 400 mL of PBS. Top up with ultrapure H2O until the final volume is 2 L. Sterilize by filtration and store at 4 &#176;C or room temperature (~20-25 &#176;C).</li>
	<li>2YT broth: Add 16 g of tryptone, 10 g of yeast extract, and 5 g of NaCl to 800 mL of ultrapure H2O and mix until fully dissolved (no clumps). Top up with ultrapure H2O until the final volume is 1 L. Sterilize by autoclaving and store at room temperature (~20-25 &#176;C).</li>
	<li>LB/carb plates: Add 12.5 g of pre-made LB mixture and 7.5 g of agar to 400 mL of H2O. Top up with ultrapure H2O until the final volume is 500 mL and sterilize by autoclaving. Make sure agar is fully dissolved and wait for it to cool to below 60 &#176;C. Add 500 &#181;L of 100 mg mL carbenicillin, mix well, and pour into plate. Store at 4 &#176;C.</li>
	<li>LB/tet plates: Add 12.5 g of pre-made LB mixture and 7.5 g of agar to 400 mL of ultrapure H2O. Top up with ultrapure H2O until the final volume is 500 mL and sterilize by autoclaving. Ensure agar is fully dissolved and wait for it to cool to below 60 &#176;C. Add 500 &#181;L of 10 mg mL tetracycline, mix well, and pour into plate. Store at 4 &#176;C.</li>
	<li>20% PEG (polyethylene glycol)/2.5 M NaCl: Add 50 g of PEG-8000 and 36.5 g of NaCl to 200 mL of ultrapure H2O. Mix until fully dissolved. 
	NOTE: This may take a while; heating can help. Top up with ultrapure H2O until the final volume is 250 mL. Sterilize by filtration or autoclaving.</li>
	<li>0.1 M HCl: Mix 20 mL of 1 M HCl with 180 mL of ultrapure H2O. Sterilize by filtration and store at room temperature (~20-25 &#176;C).</li>
	<li>1 M Tris (pH 11.0): Add 6.1 g of Tris base to 40 mL of ultrapure H2O. Adjust pH to 11.0 with HCl and mix until Tris is fully dissolved. Top up with ultrapure H2O until the final volume is 50 mL. Sterilize by filtration and store at room temperature (~20-25 &#176;C).</li>
	<li>100 mg/mL (1000x) carbenicillin: Add 2 g of the carbenicillin disodium salt to 20 mL of ultrapure H2O. Mix until fully dissolved. Sterilize by filtration and store at -20 &#176;C.</li>
	<li>50 mg/mL (1000x) kanamycin: Add 1 g of kanamycin sulfate to 20 mL of ultrapure H2O. Mix until fully dissolved. Sterilize by filtration and store at -20 &#176;C.</li>
	<li>10 mg/mL (1000x) tetracycline: Add 0.2 g of tetracycline hydrochloride to 20 mL of 70% ethanol. Mix until fully dissolved. Sterilize by filtration and store at -20 &#176;C.</li>
</ol>
2. Protein preparation
<ol>
	<li>Determine the concentration of the target protein stock in &#181;M. The most convenient way to assess protein concentration is to measure the absorbance of the protein stock at 280 nm. If the concentration is known in mg/mL, convert it to &#181;M using the molecular weight of the target protein. A range of methods can be used depending on the protein of interest; see the Discussion section for details. 
	NOTE: If the protein is truncated (specific protein domain/motif) or tagged, remember to account for these changes in molecular weight when converting from mg/mL to &#181;M.</li>
	<li>Prepare three microcentrifuge tubes labeled &#34;round 1&#34;, &#34;round 2/3&#34;, and &#34;round 4/5&#34;.
	<ol>
		<li>Calculate the volume of protein necessary to dilute it to 1 &#181;M in 800 &#181;L PBS and aliquot this volume into the tubes without adding PBS. 
		&#8203;NOTE: If the amount of target protein available is low, the concentration can be lowered to as little as 0.25 &#181;M.</li>
	</ol>
	</li>
</ol>
3. Preparation for round one of selection
<ol>
	<li>Prepare a seed culture for culturing the phage input for round two of selection.
	<ol>
		<li>Inoculate 5 mL of 2YT/tet with a well-isolated Escherichia coli colony and incubate overnight at 37 &#176;C with 200 rpm orbital shaking.</li>
	</ol>
	</li>
	<li>Coat the plate for the first round of selection.
	<ol>
		<li>Dilute the target protein in the &#34;round 1&#34; tube with the appropriate amount of PBS and aliquot 100 &#181;L into eight wells of a 96-well binding plate (i.e., the target plate). 
		&#8203;NOTE: Phage display can be done for four different proteins simultaneously on a single plate by coating the wells in the corners of the plate.</li>
		<li>Optional control: If the target protein is tagged, such as with GST or MBP (maltose binding protein), coat eight wells in another 96-well binding plate with 100 &#181;L of a 1 &#181;M solution containing the appropriate epitope tag. This will be used to remove undesired phage that bind to the tag non-specifically.</li>
		<li>Shake plate(s) overnight at 4 &#176;C with 200 rpm orbital shaking.</li>
	</ol>
	</li>
</ol>
4. Round one of selection
<ol>
	<li>Prepare the round two input.
	<ol>
		<li>Inoculate 30 mL of 2YT/tet with 200 &#181;L of the seed culture from step 3.1.</li>
		<li>Incubate at 37 &#176;C with 200 rpm orbital shaking until the bacteria are in mid-log phase (OD600 <img alt="Equation 1" src="/files/ftp_upload/62950/62950eq01v2.jpg" /> 0.6 - 0.8). This takes approximately three h.</li>
	</ol>
	</li>
	<li>Block target plate.
	<ol>
		<li>Remove the coating solution from the plate, or both plates if a control plate has been made, by inverting and shaking over a sink. Pat dry on paper towels.</li>
		<li>Add 300 &#181;L of PB buffer to each coated well.</li>
		<li>Remove the PB buffer as in step 4.2.1 and add another 200 &#181;L of PB buffer.</li>
		<li>Incubate at room temperature (~20-25 &#176;C) for 1 h with 300 rpm orbital shaking.</li>
	</ol>
	</li>
	<li>Prepare phage library.
	<ol>
		<li>Thaw the phage library on ice and dilute it to 100x the library diversity in PBS. For example, if the library diversity is 1 x 1010 and the library concentration is 1 x 1013, dilute the library so that the concentration is 1 x 1012. For the libraries used here, dilute them 10-fold in PBS by combining 1 mL of the library with 9 mL of PBS. 
		NOTE: Library diversity should have been determined during library creation and cannot be easily assessed otherwise. Library concentration can be determined by inoculating E. coli cells in mid-log phase (OD600 <img alt="Equation 1" src="/files/ftp_upload/62950/62950eq01v2.jpg" /> 0.6 - 0.8) and plating on LB/carb.</li>
		<li>Add 1/5 volume of PEG/NaCl. For example, for 10 mL of the previously diluted library, add 2 mL of PEG/NaCl.</li>
		<li>Incubate on ice for 30 min.</li>
		<li>Centrifuge at 11,000 x g for 30 min at 4 &#176;C, discard supernatant, and recentrifuge for 2 min to pull down the remaining supernatant. 
		NOTE: Put the tube in the rotor in the same orientation the second time as it was the first to keep the pellet in the same place, therefore, making it easier to see.</li>
		<li>Gently resuspend the phage pellet in 1 mL of PBT per protein. For four proteins, resuspend the pellet in 4 mL of PBT. 
		NOTE: Try not to touch the pellet and do not introduce air bubbles.</li>
	</ol>
	</li>
	<li>Display phage to the target protein(s).
	<ol>
		<li>Optional control: Add 100 &#181;L of phage library to each coated well in the control plate. Incubate at room temperature (~20-25 &#176;C) for 1 h with 300 rpm orbital shaking and transfer the library from the control plate to the target plate. Skip step 4.4.2.</li>
		<li>Remove the PB buffer from the target plate as in step 4.2.1 and add 100 &#181;L of the phage library to each coated well.</li>
		<li>Incubate at room temperature (~20-25 &#176;C) for 1 h with 300 rpm orbital shaking.</li>
	</ol>
	</li>
	<li>Elute round one phage.
	<ol>
		<li>Remove phage library and wash the coated wells four times with PT buffer. Invert the plate and tap on a paper towel to remove the last drops. 
		NOTE: If multiple target proteins are coated on one plate, try to minimize the flow of all subsequent solutions between the wells.</li>
		<li>Add 100 &#181;L of 0.1 M HCl to each coated well and incubate at room temperature for 5 min with 300 rpm orbital shaking.</li>
		<li>Neutralize the pH by adding 12.5 &#181;L of 1 M Tris-HCl (pH 11) to each coated well.</li>
		<li>Pool the eluted phage from all 8 wells into a single 1.5 mL microcentrifuge tube. Pipette up and down during the transfer to make solutions homogenous and aspirate all liquid from the wells.</li>
		<li>Add 10% BSA to the pooled eluted phage to a final concentration of 1%. For a typical round one elution volume of 950 &#181;L, add 95 &#181;L of 10% BSA. Store at 4 &#176;C. This is the round one output.</li>
	</ol>
	</li>
</ol>
5. Preparation for subsequent rounds of selection
<ol>
	<li>Prepare a seed culture for culturing the phage input for the next round of selection as in step 3.1.</li>
	<li>Coat the plate for the third round of selection as in step 3.2 with the changes noted below.
	<ol>
		<li>Only coat four wells per protein in a 96-well binding plate. Use half of the contents of the &#34;round 2/3&#34; or &#34;round 4/5&#34; tubes for the appropriate round. Dilute the contents of these tubes as needed, in order to avoid proteins settling out of the solution.</li>
	</ol>
	</li>
	<li>Prepare the phage input for the next round of selection.
	<ol>
		<li>Use half of the round one output from step 4.5.5 to inoculate 3 mL of mid-log phase cells from step 4.1. For a typical round one output, inoculate with 500 &#181;L of the output.</li>
		<li>Incubate at 37 &#176;C for 30 min with 200 rpm orbital shaking.</li>
		<li>Add M13K07 helper phage to a final concentration of 1 x 1010 PFU/mL.</li>
		<li>Incubate at 37 &#176;C for 1 h with 200 rpm orbital shaking.</li>
		<li>Transfer the entire 3 mL of culture to 30 mL of 2YT/carb/kan. Grow overnight at 37 &#176;C with 200 rpm orbital shaking.</li>
		<li>The next day, transfer the culture into a 50 mL centrifuge tube and centrifuge at 11,000 x g for 10 min at 4 &#176;C to precipitate cells.</li>
		<li>Decant the supernatant into a new 50 mL centrifuge tube and mix with 8 mL of PEG/NaCl and incubate on ice for 10 min.</li>
		<li>Centrifuge at 11,000 x g for 10 min at 4 &#176;C, discard the supernatant, and centrifuge again for 2 min. 
		NOTE: Put the tube in the rotor in the same orientation the second time as it was the first to keep the pellet in the same place, therefore, making it easier to see.</li>
		<li>Resuspend the phage pellet in 800 &#181;L of PBT so that it is fully homogenous and no clumps are visible.</li>
		<li>Transfer the phage solution to a 1.5 mL microcentrifuge tube and centrifuge at 16,200 x g for 4 min at 4 &#176;C to pellet debris.</li>
		<li>Transfer the supernatant to a new microcentrifuge tube. This is the input for the next round of selection.</li>
	</ol>
	</li>
	<li>Optional: Titer the input and output solutions.
	<ol>
		<li>Use 500 &#181;L of an E. coli seed culture to inoculate 5 mL of 2YT/tet and incubate at 37 &#176;C with 200 rpm orbital shaking until bacteria is in mid-log phase (OD600 <img alt="Equation 1" src="/files/ftp_upload/62950/62950eq01v2.jpg" /> 0.6 - 0.8). This takes approximately 1 h.</li>
		<li>Dilute phage input/output solutions to 10-3&#160;&#160;-&#160;10-5 in PBS and add 10 &#181;L of each dilution to 90 &#181;L of cultured cells. 
		NOTE: Use diluted phage solutions immediately because phage will adsorb to the tube over time, and transformations may produce false negatives.</li>
		<li>Incubate at 37 &#176;C for 20 min with 200 rpm orbital shaking.</li>
		<li>Plate 5 &#181;L on separate LB/carb plates. 
		&#8203;NOTE: Amount plated is variable depends on previous results/personal preference.</li>
	</ol>
	</li>
</ol>
6. Subsequent rounds of selection
<ol>
	<li>Perform all subsequent rounds along with the preparation as done in steps 3 and 4, respectively, with differences noted below.
	<ol>
		<li>Use the input produced in the previous round as the phage source instead of a library. Coat 4 wells per target protein with 100 &#181;L of the phage input acquired from the previous round. Store remaining phage inputs at 4 &#176;C.</li>
		<li>Make the washing step in 4.5.1 more stringent with each round of selection. Round one requires washing 4 times, round two requires 6 times, round three requires 8 times, and rounds four and five both require washing 10 times.</li>
		<li>Reduce some volumes compared to those used in round one because subsequent rounds only coat four wells instead of eight. For example, in step 4.5.5 only 45 &#181;L of 10% BSA is added to the phage output, and in step 5.3.1 only 250 &#181;L of the phage output is used to inoculate cells.</li>
	</ol>
	</li>
</ol>
7. Post selection processing and phage Isolation
<ol>
	<li>Titer the input and output solutions for rounds four and five.
	<ol>
		<li>If not already done in step 5.4, follow the same steps to titer rounds four and five phage outputs, ideally producing a range of 30-300 colonies across a few plates.</li>
	</ol>
	</li>
	<li>Culture and isolate phage.
	<ol>
		<li>Aliquot 450 &#181;L of 2YT/carb/M13K07 into every tube of a 96 mini tube culture box.</li>
		<li>Pick well-isolated colonies from any of the plates from step 7.1 to inoculate each tube. 
		NOTE: Use the top half of the box for round four outputs and the bottom half for round five outputs.</li>
		<li>Incubate overnight at 37 &#176;C with 200 rpm orbital shaking.</li>
		<li>Centrifuge at 1,200 x g for 10 min at 4 &#176;C.</li>
		<li>Transfer as much supernatant as possible to a new 96 mini tube culture box without disturbing the cell pellet and discard the old one. Store at 4 &#176;C.</li>
		<li>From the new box, transfer 100 &#181;L from each tube to a 96 well non-binding plate containing 100 &#181;L of 50% glycerol in all wells. Mix well and store at -80 &#176;C as a backup stock.</li>
	</ol>
	</li>
</ol>

<ol><li>Karlsson, O. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Design+of+a+PDZbody%2C+a+bivalent+binder+of+the+E6+protein+from+human+papillomavirus%5BTitle%5D)+AND+%22Scientific+Reports%22%5BJournal%5D)">Design of a PDZbody, a bivalent binder of the E6 protein from human papillomavirus.</a> Scientific Reports. 5 (1), 9382(2015).</li>
<li>Veggiani, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Engineered+SH2+domains+with+tailored+specificities+and+enhanced+affinities+for+phosphoproteome+analysis%5BTitle%5D)+AND+%22Protein+Science%22%5BJournal%5D)">Engineered SH2 domains with tailored specificities and enhanced affinities for phosphoproteome analysis.</a> Protein Science. 28 (2), 403-413 (2019).</li>
<li>Kaneko, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Superbinder+SH2+domains+act+as+antagonists+of+cell+signaling%5BTitle%5D)+AND+%22Science+Signaling%22%5BJournal%5D)">Superbinder SH2 domains act as antagonists of cell signaling.</a> Science Signaling. 5 (243), (2012).</li>
<li>Wiechmann, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Site-specific+inhibition+of+the+small+ubiquitin-like+modifier+%28SUMO%29-conjugating+enzyme+Ubc9+selectively+impairs+SUMO+chain+formation%5BTitle%5D)+AND+%22Journal+of+Biological+Chemistry%22%5BJournal%5D)">Site-specific inhibition of the small ubiquitin-like modifier (SUMO)-conjugating enzyme Ubc9 selectively impairs SUMO chain formation.</a> Journal of Biological Chemistry. 292 (37), 15340-15351 (2017).</li>
<li>Ernst, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+strategy+for+modulation+of+enzymes+in+the+ubiquitin+system%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">A strategy for modulation of enzymes in the ubiquitin system.</a> Science. 339 (6119), 590-595 (2013).</li>
<li>Zhang, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Potent+and+selective+inhibition+of+pathogenic+viruses+by+engineered+ubiquitin+variants%5BTitle%5D)+AND+%22PLOS+Pathogens%22%5BJournal%5D)">Potent and selective inhibition of pathogenic viruses by engineered ubiquitin variants.</a> PLOS Pathogens. 13 (5), 1006372(2017).</li>
<li>Zhang, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((System-wide+modulation+of+HECT+E3+ligases+with+selective+ubiquitin+variant+probes%5BTitle%5D)+AND+%22Molecular+Cell%22%5BJournal%5D)">System-wide modulation of HECT E3 ligases with selective ubiquitin variant probes.</a> Molecular Cell. 62 (1), 121-136 (2016).</li>
<li>Gabrielsen, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+general+strategy+for+discovery+of+inhibitors+and+activators+of+RING+and+U-box+E3+ligases+with+ubiquitin+variants%5BTitle%5D)+AND+%22Molecular+Cell%22%5BJournal%5D)">A general strategy for discovery of inhibitors and activators of RING and U-box E3 ligases with ubiquitin variants.</a> Molecular Cell. 68 (2), 456-470 (2017).</li>
<li>Brown, N. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Dual+RING+E3+architectures+regulate+multiubiquitination+and+ubiquitin+chain+elongation+by+APC%2FC%5BTitle%5D)+AND+%22Cell%22%5BJournal%5D)">Dual RING E3 architectures regulate multiubiquitination and ubiquitin chain elongation by APC/C.</a> Cell. 165 (6), 1440-1453 (2016).</li>
<li>Gorelik, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Inhibition+of+SCF+ubiquitin+ligases+by+engineered+ubiquitin+variants+that+target+the+Cul1+binding+site+on+the+Skp1-F-box+interface%5BTitle%5D)+AND+%22Proceedings+of+the+National+Academy+of+Sciences%22%5BJournal%5D)">Inhibition of SCF ubiquitin ligases by engineered ubiquitin variants that target the Cul1 binding site on the Skp1-F-box interface.</a> Proceedings of the National Academy of Sciences. 113 (13), 3527-3532 (2016).</li>
<li>Goldring, J. P. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Protein+quantification+methods+to+determine+protein+concentration+prior+to+electrophoresis%5BTitle%5D)+AND+%22Protein+Electrophoresis%22%5BJournal%5D)">Protein quantification methods to determine protein concentration prior to electrophoresis.</a> Protein Electrophoresis. 869, 29-35 (2012).</li>
<li>Zhang, W., Sidhu, S. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Generating+intracellular+modulators+of+E3+ligases+and+deubiquitinases+from+phage-displayed+ubiquitin+variant+libraries%5BTitle%5D)+AND+%22The+Ubiquitin+Proteasome+System%3A+Methods+and+Protocols%22%5BJournal%5D)">Generating intracellular modulators of E3 ligases and deubiquitinases from phage-displayed ubiquitin variant libraries.</a> The Ubiquitin Proteasome System: Methods and Protocols. 1844, 101-119 (2018).</li>
<li>Sheehan, J., Marasco, W. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Phage+and+yeast+display%5BTitle%5D)+AND+%22Microbiology+Spectrum%22%5BJournal%5D)">Phage and yeast display.</a> Microbiology Spectrum. 3 (1), 1-17 (2015).</li>
<li>Lowman, H. B., Wells, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Monovalent+phage+display%3A+A+method+for+selecting+variant+proteins+from+random+libraries%5BTitle%5D)+AND+%22Methods%22%5BJournal%5D)">Monovalent phage display: A method for selecting variant proteins from random libraries.</a> Methods. 3 (3), 205-216 (1991).</li>
<li>Lowman, H. B., Bass, S. H., Simpson, N., Wells, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Selecting+high-affinity+binding+proteins+by+monovalent+phage+display%5BTitle%5D)+AND+%22Biochemistry%22%5BJournal%5D)">Selecting high-affinity binding proteins by monovalent phage display.</a> Biochemistry. 30 (45), 1-7 (1991).</li>
<li>Beaber, J. W., Tam, E. M., Lao, L. S., Rondon, I. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+new+helper+phage+for+improved+monovalent+display+of+Fab+molecules%5BTitle%5D)+AND+%22Journal+of+Immunological+Methods%22%5BJournal%5D)">A new helper phage for improved monovalent display of Fab molecules.</a> Journal of Immunological Methods. 376 (1-2), 46-54 (2012).</li>
<li>Galán, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Library-based+display+technologies%3A+where+do+we+stand%5BTitle%5D)+AND+%22Molecular+BioSystems%22%5BJournal%5D)">Library-based display technologies: where do we stand.</a> Molecular BioSystems. 12 (8), 2342-2358 (2016).</li>
<li>Huang, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ribosome+display+and+selection+of+single-chain+variable+fragments+effectively+inhibit+growth+and+progression+of+microspheres+in+vitro+and+in+vivo%5BTitle%5D)+AND+%22Cancer+Science%22%5BJournal%5D)">Ribosome display and selection of single-chain variable fragments effectively inhibit growth and progression of microspheres in vitro and in vivo.</a> Cancer Science. 109 (5), 1503-1512 (2018).</li>
<li>Yamaguchi, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((cDNA+display%3A+a+novel+screening+method+for+functional+disulfide-rich+peptides+by+solid-phase+synthesis+and+stabilization+of+mRNA-protein+fusions%5BTitle%5D)+AND+%22Nucleic+Acids+Research%22%5BJournal%5D)">cDNA display: a novel screening method for functional disulfide-rich peptides by solid-phase synthesis and stabilization of mRNA-protein fusions.</a> Nucleic Acids Research. 37 (16), 1-13 (2009).</li>
<li>Mochizuki, Y., Kumachi, S., Nishigaki, K., Nemoto, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Increasing+the+library+size+in+cDNA+display+by+optimizing+purification+procedures%5BTitle%5D)+AND+%22Biological+Procedures+Online%22%5BJournal%5D)">Increasing the library size in cDNA display by optimizing purification procedures.</a> Biological Procedures Online. 15 (1), 1-5 (2013).</li>
<li>Odegrip, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((CIS+display%3A+In+vitro+selection+of+peptides+from+libraries+of+protein-DNA+complexes%5BTitle%5D)+AND+%22Proceedings+of+the+National+Academy+of+Sciences%22%5BJournal%5D)">CIS display: In vitro selection of peptides from libraries of protein-DNA complexes.</a> Proceedings of the National Academy of Sciences. 101 (9), 2806-2810 (2004).</li>
<li>Reiersen, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Covalent+antibody+display--an+in+vitro+antibody-DNA+library+selection+system%5BTitle%5D)+AND+%22Nucleic+Acids+Research%22%5BJournal%5D)">Covalent antibody display--an in vitro antibody-DNA library selection system.</a> Nucleic Acids Research. 33 (1), 1-9 (2005).</li>
<li>Houlihan, G., Gatti-Lafranconi, P., Lowe, D., Hollfelder, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Directed+evolution+of+anti-HER2+DARPins+by+SNAP+display+reveals+stability%2Ffunction+trade-offs+in+the+selection+process%5BTitle%5D)+AND+%22Protein+Engineering+Design+and+Selection%22%5BJournal%5D)">Directed evolution of anti-HER2 DARPins by SNAP display reveals stability/function trade-offs in the selection process.</a> Protein Engineering Design and Selection. 28 (9), 269-279 (2015).</li>
<li>Zhang, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Generation+and+validation+of+intracellular+ubiquitin+variant+inhibitors+for+USP7+and+USP10%5BTitle%5D)+AND+%22Journal+of+Molecular+Biology%22%5BJournal%5D)">Generation and validation of intracellular ubiquitin variant inhibitors for USP7 and USP10.</a> Journal of Molecular Biology. 429 (22), 3546-3560 (2017).</li>
<li>Teyra, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Structural+and+functional+characterization+of+ubiquitin+variant+inhibitors+of+USP15%5BTitle%5D)+AND+%22Structure%22%5BJournal%5D)">Structural and functional characterization of ubiquitin variant inhibitors of USP15.</a> Structure. 27 (4), 590-605 (2019).</li>
</ol>

The authors declare no conflict of interests.

As mentioned in step 2.1 (protein preparation), a variety of methods can be used to assess the protein concentration, and each will have unique benefits and drawbacks based on the specific target protein used for phage display. A source of detailed descriptions and protocols for popular methods has been provided previously11.
Using the phage retained by a previous round of phage display as the input for a subsequent round enriches the good binders by gradually removing ...

Understanding the molecular details of protein-protein interactions is critical for delineating the signal transduction mechanisms of biological processes, particularly those that contribute to clinically important diseases. In recent years, phage display has been utilized as a practical and accessible method to isolate proteins/peptides with much improved binding to a desired target protein1,2,3,4, which in turn can be used as intracellular probes of protein-protein interactions.
Ubiquitination is a cascade of enzymatic activities (E1 activating enzyme &#8594; E2 conjugating enzyme &#8594; E3 ligases) that covalently conjugate ubiquitin (Ub) to protein substrates to target them for degradation or to mediate cell signaling changes. In addition, deubiquitinases catalyze the removal of ubiquitin from proteins. Therefore, in cells, there are thousands of Ub-dependent protein-protein interactions, the vast majority of which recognize a common surface with low affinity but high specificity to allow weak interactions through large and diverse surfaces.
Ernst et al. introduced mutations into known binding regions of Ub in order to see if they could enhance binding affinity for a protein of interest while still maintaining high selectivity5. A combinatorial library of over 10 billion (7.5 x 1010) Ub variants (UbVs) with mutations at positions across the Ub surface that mediate the known Ub-protein interactions was developed. This library consisted of phagemids that express the M13 bacteriophage pIII coat protein fused to diversified UbVs. Therefore, individual UbVs can be displayed on the phage surface via the coat protein upon expression. During the selection process, phage that display UbVs with considerable binding interactions with the target protein will be retained and enriched in subsequent rounds of phage display, whereas phage displaying UbVs that bind poorly to the target protein are washed away and removed from the phage pool. The retained phage particles contain the phagemid corresponding to their displayed UbV, allowing them to be sequenced and further characterized once isolated.
Using this protein engineering strategy, UbV inhibitors were developed for human deubiquitinases5 and viral proteases6. Importantly, we have generated inhibitory UbVs for human HECT-family E3 ligases through hijacking the E2-binding site and activating UbVs that occupy a Ub-binding exosite on the HECT domain7. We can also inhibit monomeric RING-family E3s by targeting the E2 binding site and induce UbV dimerization to activate homodimeric RING E3s8. For multi-subunit RING E3s, UbVs can achieve inhibition by targeting the RING subunit (e.g., for APC/C complex9) or disrupting complex formation (e.g., for SCF E3s10). Collectively, UbVs can be leveraged to systematically interrogate protein-protein interactions in the Ub-proteasome system (UPS) so that we can better decipher biochemical mechanisms of UPS enzymes and to identify and validate functional sites for therapeutic intervention.
The following protocol describes how to employ a previously generated phage displayed UbV library to target a protein of interest and how to enrich the UbV binders that interact with the target protein through successive rounds of phage display.

<table><tbody><tr><td>Axygen Mini Tube System (0.65 mL, sterile, 96/Rack, 10 Racks/pack)</td><td>Fisher Scientific</td><td>14-222-198</td><td>Culturing phage outputs after phage display.</td></tr><tr><td>BD Difco Dehydrated Culture Media: LB Broth, Miller (Luria-Bertani)</td><td>Fisher Scientific</td><td>DF0446-17-3</td><td>Preparing plates for titering.</td></tr><tr><td>Bovine Serum Albumin (BSA), Fraction V</td><td>BioShop Canada</td><td>ALB001</td><td>Buffer component.</td></tr><tr><td>Carbenicillin disodium salt 89.0-100.5% anhydrous</td><td>Millipore-Sigma</td><td>C1389-5G</td><td>Culturing phagemid-infected cells.</td></tr><tr><td>Compact Digital Microplate Shaker</td><td>Fisher Scientific</td><td>11-676-337</td><td>Shaking plates during incubation with the phage library.</td></tr><tr><td>Corning Microplate Aluminum Sealing Tape</td><td>Fisher Scientific</td><td>07-200-684</td><td>Sealing phage glycerol stocks.</td></tr><tr><td>Dehydrated Agar</td><td>Fisher Scientific</td><td>DF0140-01-0</td><td>Preparing plates for titering.</td></tr><tr><td>DS-11 Spectrophotometer/Fluorometer</td><td>DeNovix</td><td>DS-11 FX+</td><td>Protein concentration measurement.</td></tr><tr><td>Greiner Bio-One CellStar 96-Well, Non-Treated, U-Shaped-Bottom Microplate</td><td>Fisher Scientific</td><td>7000133</td><td>Storing phage glycerol stocks.</td></tr><tr><td>Hydrochloric Acid</td><td>Fisher Scientific</td><td>A144-500</td><td>Phage elution.</td></tr><tr><td>Invitrogen One Shot OmniMAX 2 T1R Chemically Competent &lt;em&gt;E. coli&lt;/em&gt;</td><td>Fisher Scientific</td><td>C854003</td><td>Bacterial strain for phage infection.</td></tr><tr><td>Kanamycin Sulfate</td><td>Fisher Scientific</td><td>AAJ1792406</td><td>Culturing M13K07 helper phage-infected cells.</td></tr><tr><td>M13KO7 Helper Phage</td><td>New England Biolabs</td><td>&amp;nbsp;N0315S</td><td>Permit phagemid packing and secretion.</td></tr><tr><td>MaxQ 4000 Benchtop Orbital Shaker</td><td>Fisher Scientific</td><td>11-676-076</td><td>Bacterial cell culture.</td></tr><tr><td>Nunc MaxiSorp 96 well microplate, flat bottom</td><td>Life Technologies</td><td>44-2404-21</td><td>Immobilizing proteins.</td></tr><tr><td>Phosphate Buffered Saline (PBS) 10X Solution</td><td>Fisher Scientific</td><td>BP3994</td><td>Buffer component/phage resuspension medium.</td></tr><tr><td>Polyester Films for ELISA and Incubation</td><td>VWR</td><td>60941-120</td><td>Covering the microplates during incubation.</td></tr><tr><td>Polyethylene Glycol 8000 (PEG)</td><td>Fisher Scientific</td><td>BP233-1</td><td>Phage precipitation.</td></tr><tr><td>Sodium chloride</td><td>Millipore-Sigma</td><td>S3014</td><td>Phage precipitation.</td></tr><tr><td>Sterile Plastic Culture Tubes: Translucent Polypropylene</td><td>Fisher Scientific</td><td>14-956-1D</td><td>Culturing phage inputs.</td></tr><tr><td>Tetracycline Hydrochloride</td><td>Fisher Scientific</td><td>BP912-100</td><td>Culturing &lt;em&gt;E. coli&lt;/em&gt; OmniMax cells.</td></tr><tr><td>Tris Base</td><td>Fisher Scientific</td><td>BP1525</td><td>Neutralizing eluted phage solution.</td></tr><tr><td>Tryptone Powder</td><td>Fisher Scientific</td><td>BP1421-2</td><td>Cell growth media component.</td></tr><tr><td>Tween 20</td><td>Fisher Scientific</td><td>BP337500</td><td>Buffer component.</td></tr><tr><td>Yeast Extract</td><td>Fisher Scientific</td><td>BP1422-2</td><td>Cell growth media component.</td></tr></tbody></table>

using phage display to develop ubiquitin variant modulators for e3 ligases

Ubiquitin is a small 8.6 kDa protein that is a core component of the ubiquitin-proteasome system. Consequently, it can bind to a diverse array of proteins with high specificity but low affinity. Through phage display, ubiquitin variants (UbVs) can be engineered such that they exhibit improved affinity over wildtype ubiquitin and maintain binding specificity to target proteins. Phage display utilizes a phagemid library, whereby the pIII coat protein of a filamentous M13 bacteriophage (chosen because it is displayed externally on the phage surface) is fused with UbVs. Specific residues of human wildtype ubiquitin are soft and randomized (i.e., there is a bias towards to native wildtype sequence) to generate UbVs so that deleterious changes in protein conformation are avoided while introducing the diversity necessary for promoting novel interactions with the target protein. During the phage display process, these UbVs are expressed and displayed on phage coat proteins and panned against a protein of interest. UbVs that exhibit favorable binding interactions with the target protein are retained, whereas poor binders are washed away and removed from the library pool. The retained UbVs, which are attached to the phage particle containing the UbV's corresponding phagemid, are eluted, amplified, and concentrated so that they can be panned against the same target protein in another round of phage display. Typically, up to five rounds of phage display are performed, during which a strong selection pressure is imposed against UbVs that bind weakly and/or promiscuously so that those with higher affinities are concentrated and enriched. Ultimately, UbVs that demonstrate higher specificity and/or affinity for the target protein than their wildtype counterparts are isolated and can be characterized through further experiments.

Binders produced from phage display can be verified and analyzed in many ways. It is recommended to first proceed with sequencing the phage with primers that flank the diversified insert in the phagemid library. An ideal phage display experiment will show a clear bias towards several sequences (Figure 1). Other sequences will also be present but with a lower count, appearing more as background noise. In the example provided, where phage display was performed between ubiquitin variants (UbVs)...

Watch this Scientific Journal Video about Using Phage Display to Develop Ubiquitin Variant Modulators for E3 Ligases at JoVE.com

Using Phage Display to Develop Ubiquitin Variant Modulators for E3 Ligases

Ubiquitination is a critical protein post-translational modification, dysregulation of which has been implicated in numerous human diseases. This protocol details how phage display can be utilized to isolate novel ubiquitin variants that can bind and modulate the activity of E3 ligases that control the specificity, efficiency, and patterns of ubiquitination.

Ubiquitin is a small 8.6 kDa protein that is a core component of the ubiquitin-proteasome system. Consequently, it can bind to a diverse array of proteins ...

using-phage-display-to-develop-ubiquitin-variant-modulators-for-e3

Research

JoVE Journal

Biochemistry

3.0K Views.  University of Guelph. Ubiquitination is a critical protein post-translational modification, dysregulation of which has been implicated in numerous human diseases. This protocol details how phage display can be utilized to isolate novel ubiquitin variants that can bind and modulate the activity of E3 ligases that control the specificity, efficiency, and patterns of ubiquitination.

Video: Using Phage Display to Develop Ubiquitin Variant Modulators for E3 Ligases

In Vitro Ubiquitination and Deubiquitination Assays of Nucleosomal Histones

Ubiquitination is a post-translational modification that plays important roles in various signaling pathways and is notably involved in the coordination of chromatin function and DNA-associated processes. This modification involves a sequential action of several enzymes including E1 ubiquitin-activating, E2 ubiquitin-conjugating and E3 ubiquitin-ligase and is reversed by deubiquitinases (DUBs). Ubiquitination induces degradation of proteins or alteration of protein function including modulation of enzymatic activity, protein-protein interaction and subcellular localization. A critical step in demonstrating protein ubiquitination or deubiquitination is to perform in vitro reactions with purified components. Effective ubiquitination and deubiquitination reactions could be greatly impacted by the different components used, enzyme co-factors, buffer conditions, and the nature of the substrate.&#160; Here, we provide step-by-step protocols for conducting ubiquitination and deubiquitination reactions. We illustrate these reactions using minimal components of the mouse Polycomb Repressive Complex 1 (PRC1), BMI1, and RING1B, an E3 ubiquitin ligase that monoubiquitinates histone H2A on lysine 119. Deubiquitination of nucleosomal H2A is performed using a minimal Polycomb Repressive Deubiquitinase (PR-DUB) complex formed by the human deubiquitinase BAP1 and the DEUBiquitinase ADaptor (DEUBAD) domain of its co-factor ASXL2. These ubiquitination/deubiquitination assays can be conducted in the context of either recombinant nucleosomes reconstituted with bacteria-purified proteins or native nucleosomes purified from mammalian cells. We highlight the intricacies that can have a significant impact on these reactions and we propose that the general principles of these protocols can be swiftly adapted to other E3 ubiquitin ligases and deubiquitinases.

Ubiquitination is a post-translational modification that plays important roles in cellular processes and is tightly coordinated by deubiquitination. Defects in both reactions underlie human pathologies. We provide protocols for conducting ubiquitination and deubiquitination reaction in vitro using purified components.

Ubiquitination is a post-translational modification that plays important roles in various signaling pathways and is notably involved in the coordination ...

Profiling Ubiquitin and Ubiquitin-like Dependent Post-translational Modifications and Identification of Significant Alterations

Ubiquitin (ub) and ubiquitin-like (ubl) dependent post-translational modifications of proteins play fundamental biological regulatory roles within the cell by controlling protein stability, activity, interactions, and intracellular localization. They enable the cell to respond to signals and to adapt to changes in its environment. Alterations within these mechanisms can lead to severe pathological situations such as neurodegenerative diseases and cancers. The aim of the technique described here is to establish ub/ubls dependent PTMs profiles, rapidly and accurately, from cultured cell lines. The comparison of different profiles obtained from different conditions allows the identification of specific alterations, such as those induced by a treatment for example. Lentiviral mediated cell transduction is performed to create stable cell lines expressing a two-tags (6His and Flag) version of the modifier (ubiquitin or a ubl such as SUMO1 or Nedd8). These tags permit the purification of ubiquitin and therefore of ubiquitinated proteins from the cells. This is done through a two-step purification process: The first one is performed in denaturing conditions using the 6His tag, and the second one in native conditions using the Flag tag. This leads to a highly specific and pure isolation of modified proteins which are subsequently identified and semi-quantified by liquid chromatography followed by tandem mass spectrometry (LC-MS/MS) technology. Easy informatics analysis of MS data using Excel software enables the establishment of PTM profiles by eliminating background signals. These profiles are compared between each condition in order to identify specific alterations which will then be studied more specifically, starting with their validation by standard biochemistry techniques.

This protocol aims at establishing ubiquitin (Ub) and ubiquitin-likes (Ubls) specific proteomes in order to identify alterations of these kind of post-translational modifications (PTMs), associated with a specific condition such as a treatment or a phenotype.

Ubiquitin (ub) and ubiquitin-like (ubl) dependent post-translational modifications of proteins play fundamental biological regulatory roles within the ...

Functional Characterization of RING-Type E3 Ubiquitin Ligases In Vitro and In Planta

Ubiquitination, as a posttranslational modification of proteins, plays an important regulatory role in homeostasis of eukaryotic cells. The covalent attachment of 76 amino acid ubiquitin modifiers to a target protein, depending on the length and topology of the polyubiquitin chain, can result in different outcomes ranging from protein degradation to changes in the localization and/or activity of modified protein. Three enzymes sequentially catalyze the ubiquitination process: E1 ubiquitin-activating enzyme, E2 ubiquitin-conjugating enzyme, and E3 ubiquitin ligase. E3 ubiquitin ligase determines substrate specificity and, therefore, represents a very interesting study subject. Here we present a comprehensive approach to study the relationship between the enzymatic activity and function of the RING-type E3 ubiquitin ligase. This four-step protocol describes 1) how to generate an E3 ligase deficient mutant through site-directed mutagenesis targeted at the conserved RING domain; 2&#8211;3) how to examine the ubiquitination activity both in vitro and in planta; 4) how to link those biochemical analysis to the biological significance of the tested protein. Generation of an E3 ligase-deficient mutant that still interacts with its substrate but no longer ubiquitinates it for degradation facilitates the testing of enzyme-substrate interactions in vivo. Furthermore, the mutation in the conserved RING domain often confers a dominant negative phenotype that can be utilized in functional knockout studies as an alternative approach to an RNA-interference approach. Our methods were optimized to investigate the biological role of the plant parasitic nematode effector RHA1B, which hijacks the host ubiquitination system in plant cells to promote parasitism. With slight modification of the in vivo expression system, this protocol can be applied to the analysis of any RING-type E3 ligase regardless of its origins.

The goal of this manuscript is to present an outline for the comprehensive biochemical and functional studies of the RING-type E3 ubiquitin ligases. This multistep pipeline, with detailed protocols, validates an enzymatic activity of the tested protein and demonstrates how to link the activity to function.

Ubiquitination, as a posttranslational modification of proteins, plays an important regulatory role in homeostasis of eukaryotic cells. The covalent ...

Evaluation of Substrate Ubiquitylation by E3 Ubiquitin-ligase in Mammalian Cell Lysates

Ubiquitylation is a post-translational modification which occurs in eukaryotic cells that is critical for several biological pathways' regulation, including cell survival, proliferation, and differentiation. It is a reversible process that consists of a covalent attachment of ubiquitin to the substrate through a cascade reaction of at least three different enzymes, composed of E1 (Ubiquitin-activation enzyme), E2 (Ubiquitin-conjugating enzyme), and E3 (Ubiquitin-ligase enzyme). The E3 complex plays an important role in substrate recognition and ubiquitylation. Here, a protocol is described to evaluate substrate ubiquitylation in mammalian cells using transient co-transfection of a plasmid encoding the selected substrate, an E3 ubiquitin ligase, and a tagged ubiquitin. Before lysis, the transfected cells are treated with the proteasome inhibitor MG132 (carbobenzoxy-leu-leu-leucinal) to avoid substrate proteasomal degradation. Furthermore, the cell extract is submitted to small-scale immunoprecipitation (IP) to purify the polyubiquitylated substrate for subsequent detection by western blotting (WB) using specific antibodies for ubiquitin tag. Hence, a consistent and uncomplicated protocol for ubiquitylation assay in mammalian cells is described to assist scientists in addressing ubiquitylation of specific substrates and E3 ubiquitin ligases.

We provide a detailed protocol for a ubiquitylation assay of a specific substrate and an E3 ubiquitin-ligase in mammalian cells. HEK293T cell lines were used for protein overexpression, the polyubiquitylated substrate was purified from cell lysates by immunoprecipitation, and resolved in SDS-PAGE. Immunoblotting was used to visualize this post-translational modification.

Ubiquitylation is a post-translational modification which occurs in eukaryotic cells that is critical for several biological pathways' regulation, ...

Bacterial Peptide Display for the Selection of Novel Biotinylating Enzymes

Biotin is an attractive post-translational modification of proteins that provides a powerful tag for the isolation and detection of protein. Enzymatic biotinylation by the E. coli biotin-protein ligase BirA is highly specific and allows for the biotinylation of target proteins in their native environment; however, the current usage of BirA mediated biotinylation requires the presence of a synthetic acceptor peptide (AP) in the target protein. Therefore, its application is limited to proteins that have been engineered to contain the AP. The purpose of the present protocol is to use the bacterial display of a peptide derived from an unmodified target protein to select for BirA variants that biotinylates the peptide. The system is based on a single plasmid that allows for the co-expression of BirA variants along with a scaffold for the peptide display on the bacterial surface. The protocol describes a detailed procedure for the incorporation of the target peptide into the display scaffold, creation of the BirA library, selection of active BirA variants and initial characterization of the isolated BirA variants. The method provides a highly effective selection system for the isolation of novel BirA variants that can be used for the further directed evolution of biotin-protein ligases that biotinylate a native protein in complex solutions.

Here we present a method to select for novel variants of the E. coli biotin-protein ligase BirA that biotinylates a specific target peptide. The protocol describes the construction of a plasmid for the bacterial display of the target peptide, generation of a BirA library, selection and characterization of BirA variants.

Biotin is an attractive post-translational modification of proteins that provides a powerful tag for the isolation and detection of protein. Enzymatic ...

Immunology and Infection

A Protocol for Phage Display and Affinity Selection Using Recombinant Protein Baits

Using recombinant phage as a scaffold to present various protein portions encoded by a directionally cloned cDNA library to immobilized bait molecules is an efficient means to discover interactions. The technique has largely been used to discover protein-protein interactions but the bait molecule to be challenged need not be restricted to proteins. The protocol presented here has been optimized to allow a modest number of baits to be screened in replicates to maximize the identification of independent clones presenting the same protein. This permits greater confidence that interacting proteins identified are legitimate interactors of the bait molecule. Monitoring the phage titer after each affinity selection round provides information on how the affinity selection is progressing as well as on the efficacy of negative controls. One means of titering the phage, and how and what to prepare in advance to allow this process to progress as efficiently as possible, is presented. Attributes of amplicons retrieved following isolation of independent plaque are highlighted that can be used to ascertain how well the affinity selection has progressed. Trouble shooting techniques to minimize false positives or to bypass persistently recovered phage are explained. Means of reducing viral contamination flare up are discussed.

Phage display is a powerful technique to capture proteins or protein moieties that interact with an immobilized molecule of interest. Once a decision of the type of phage cDNA library to create and screen has been made, the protocol described here permits efficient affinity selection leading to identification of interactors.

Using  recombinant phage as a scaffold to present various protein portions encoded by  a directionally cloned cDNA library to immobilized bait molecules ...

Biology

siRNA Screening to Identify Ubiquitin and Ubiquitin-like System Regulators of Biological Pathways in Cultured Mammalian Cells

Post-translational modification of proteins with ubiquitin and ubiquitin-like molecules (UBLs) is emerging as a dynamic cellular signaling network that regulates diverse biological pathways including the hypoxia response, proteostasis, the DNA damage response and transcription.&#160; To better understand how UBLs regulate pathways relevant to human disease, we have compiled a human siRNA &#8220;ubiquitome&#8221; library consisting of 1,186 siRNA duplex pools targeting all known and predicted components of UBL system pathways. This library can be screened against a range of cell lines expressing reporters of diverse biological pathways to determine which UBL components act as positive or negative regulators of the pathway in question.&#160; Here, we describe a protocol utilizing this library to identify ubiquitome-regulators of the HIF1A-mediated cellular response to hypoxia using a transcription-based luciferase reporter.&#160; An initial assay development stage is performed to establish suitable screening parameters of the cell line before performing the screen in three stages: primary, secondary and tertiary/deconvolution screening. &#160;The use of targeted over whole genome siRNA libraries is becoming increasingly popular as it offers the advantage of reporting only on members of the pathway with which the investigators are most interested.&#160; Despite inherent limitations of siRNA screening, in particular false-positives caused by siRNA off-target effects, the identification of genuine novel regulators of the pathways in question outweigh these shortcomings, which can be overcome by performing a series of carefully undertaken control experiments.

Here, we describe a methodology to perform a targeted siRNA &#8220;ubiquitome&#8221; screen to identify novel ubiquitin and ubiquitin-like regulators of the HIF1A-mediated cellular response to hypoxia.&#160; This can be adapted to any biological pathway where a robust read out of reporter activity is available.

Post-translational modification of proteins with ubiquitin and ubiquitin-like molecules (UBLs) is emerging as a dynamic cellular signaling network that ...

A Scalable, Cell-Based Method for the Functional Assessment of Ube3a Variants

The increased use of sequencing in medicine has identified millions of coding variants in the human genome. Many of these variants occur in genes associated with neurodevelopmental disorders, but the functional significance of the vast majority of variants remains unknown. The present protocol describes the study of variants for Ube3a, a gene that encodes an E3 ubiquitin ligase linked to both autism and Angelman syndrome. Duplication or triplication of Ube3a is strongly linked to autism, whereas its deletion causes Angelman syndrome. Thus, understanding the valence of changes in UBE3A protein activity is important for clinical outcomes. Here, a rapid, cell-based method that pairs Ube3a variants with a Wnt pathway reporter is described. This simple assay is scalable and can be used to determine the valence and magnitude of activity changes in any Ube3a variant. Moreover, the facility of this method allows the generation of a wealth of structure-function information, which can be used to gain deep insights into the enzymatic mechanisms of UBE3A.

A Scalable, Cell-Based Method for the Functional Assessment of Ube3a Variants

A simple and scalable method was developed to assess the functional significance of missense variants in Ube3a, a gene whose loss and gain of function are linked to both Angelman syndrome and autism spectrum disorder.

The increased use of sequencing in medicine has identified millions of coding variants in the human genome. Many of these variants occur in genes ...

Neuroscience

In Vitro Analysis of E3 Ubiquitin Ligase Function

The covalent attachment of ubiquitin (Ub) to internal lysine residue(s) of a substrate protein, a process termed ubiquitylation, represents one of the most important post-translational modifications in eukaryotic organisms. Ubiquitylation is mediated by a sequential cascade of three enzyme classes including ubiquitin-activating enzymes (E1 enzymes), ubiquitin-conjugating enzymes (E2 enzymes), and ubiquitin ligases (E3 enzymes), and sometimes, ubiquitin-chain elongation factors (E4 enzymes). Here, in vitro protocols for ubiquitylation assays are provided, which allow the assessment of E3 ubiquitin ligase activity, the cooperation between E2-E3 pairs, and substrate selection. Cooperating E2-E3 pairs can be screened by monitoring the generation of free poly-ubiquitin chains and/or auto-ubiquitylation of the E3 ligase. Substrate ubiquitylation is defined by selective binding of the E3 ligase and can be detected by western blotting of the in vitro reaction. Furthermore, an E2~Ub discharge assay is described, which is a useful tool for the direct assessment of functional E2-E3 cooperation. Here, the E3-dependent transfer of ubiquitin is followed from the corresponding E2 enzyme onto free lysine amino acids (mimicking substrate ubiquitylation) or internal lysines of the E3 ligase itself (auto-ubiquitylation). In conclusion, three different in vitro protocols are provided that are fast and easy to perform to address E3 ligase catalytic functionality.

In Vitro Analysis of E3 Ubiquitin Ligase Function

The present study provides detailed in vitro ubiquitylation assay protocols for the analysis of E3 ubiquitin ligase catalytic activity. Recombinant proteins were expressed using prokaryotic systems such as Escherichia coli culture.

The covalent attachment of ubiquitin (Ub) to internal lysine residue(s) of a substrate protein, a process termed ubiquitylation, represents one of the ...

Virtual Screening and Validation of UCHL3 Inhibitors Using Molecular Docking

Screening Traditional Chinese Medicine Compounds for Inhibiting UCHL3 Activity Based on Molecular Docking and Deubiquitinating Enzyme Probe Technology

Deubiquitinating enzymes&#160;(DUBs) play a pivotal role in modulating ubiquitination homeostasis, with UCHL3 being an archetypal cysteine DUB intricately involved in a myriad of physiological and pathological processes. Therefore, developing small molecule inhibitors targeting Ubiquitin C-Terminal Hydrolase L3 (UCHL3) is of great significance. This protocol aims to establish a process for virtual screening and in vitro validation of small molecule inhibitors of cysteine DUB represented by UCHL3. Firstly, potential inhibitors of UCHL3 are virtually screened using molecular docking technology, and the interaction between drugs and protein targets is visualized. Subsequently, the effectiveness of the screened drug, Danshensu, is verified through in vitro activity inhibition assays. Ubiquitin-7-amino-4-methylcoumarin (Ub-AMC) and hemagglutinin-ubiquitin-vinyl sulfone (HA-Ub-VS) are used as probes for in vitro activity testing, as they can competitively bind to DUB with small molecule inhibitors to assess the activity of UCHL3. The results indicate that Danshensu has a good binding affinity with UCHL3 in molecular docking, and it can competitively inhibit the activity of UCHL3 with HA-Ub-VS. These findings provide important references for further research and development of therapeutic drugs targeting UCHL3.

The experiment used here shows a method of molecular docking combined with probe technologies to predict and validate the interaction between small molecules of traditional Chinese medicine and protein targets.

Deubiquitinating enzymes&#160;(DUBs) play a pivotal role in modulating ubiquitination homeostasis, with UCHL3 being an archetypal cysteine DUB intricately ...

Using Phage Display to Develop Ubiquitin Variant Modulators for E3 Ligases

Podsumowanie

Przeglądaj więcej filmów

In Vitro Ubiquitination and Deubiquitination Assays of Nucleosomal Histones

Profiling Ubiquitin and Ubiquitin-like Dependent Post-translational Modifications and Identification of Significant Alterations

Functional Characterization of RING-Type E3 Ubiquitin Ligases In Vitro and In Planta

Evaluation of Substrate Ubiquitylation by E3 Ubiquitin-ligase in Mammalian Cell Lysates

Bacterial Peptide Display for the Selection of Novel Biotinylating Enzymes

A Protocol for Phage Display and Affinity Selection Using Recombinant Protein Baits

siRNA Screening to Identify Ubiquitin and Ubiquitin-like System Regulators of Biological Pathways in Cultured Mammalian Cells

A Scalable, Cell-Based Method for the Functional Assessment of Ube3a Variants

In Vitro Analysis of E3 Ubiquitin Ligase Function

Screening Traditional Chinese Medicine Compounds for Inhibiting UCHL3 Activity Based on Molecular Docking and Deubiquitinating Enzyme Probe Technology