A Virtual Simulation Experiment of Mechanics: Material Deformation and Failure Based on Scanning Electron Microscopy
Please note that all translations are automatically generated. Click here for the English version.
2.0K Views
•
06:54 min
•
January 20th, 2023
DOI :
January 20th, 2023
•Przeglądaj więcej filmów
Rozdziały w tym wideo
0:05
Introduction
0:44
Molding the Specimen
2:48
Specimen Characterization, Loading, and Nanoindenter Installation
3:40
In‐Situ Scanning Electron Microscopy (SEM) Experiment
4:56
Results: Efficiency of the Web-Based Virtual Simulation Experiment
6:22
Conclusion
Powiązane Filmy
09:26
In Situ Time-dependent Dielectric Breakdown in the Transmission Electron Microscope: A Possibility to Understand the Failure Mechanism in Microelectronic Devices
8.7K Views
11:14
Comprehensive Characterization of Extended Defects in Semiconductor Materials by a Scanning Electron Microscope
13.6K Views
07:15
A Novel Method for In Situ Electromechanical Characterization of Nanoscale Specimens
9.1K Views
11:28
A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials
12.4K Views
07:37
Full-field Strain Measurements for Microstructurally Small Fatigue Crack Propagation Using Digital Image Correlation Method
9.6K Views
09:00
Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography
13.2K Views
08:31
Sample Preparation and Experimental Design for In Situ Multi-Beam Transmission Electron Microscopy Irradiation Experiments
1.6K Views
08:43
Imaging of the Microstructural Failure Mechanism in the Human Hip
718 Views
03:07
Scanning Electron Microscopic Evaluation of Surface Defects of Remover Retreatment File After Single and Multiple Uses
384 Views
14:53
Stress-Strain Characteristics of Aluminum
88.6K Views
Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone