inkjet-printing-all-inorganic-halide-perovskite-inks-for-photovoltaic

Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications

A method for synthesizing photoactive inorganic&#160;perovskite quantum dot inks and an inkjet printer deposition method, using the synthesized inks, are ...

University of Nebraska-Lincoln

Spin polarization is an unusually ambiguous scientific idiom and, as such, is rarely well defined. A given experimental methodology may allow one to quantify a spin polarization but only in its particular context. As one might expect, these ambiguities sometimes give rise to inappropriate interpretations when comparing the spin polarizations determined through different methods. The spin polarization of CrO(2) and Cr(2)O(3) illustrate some of the complications which hinders comparisons of spin polarization values.

When measured spin polarization is not spin polarization.

Heteroepitaxial coupling at complex oxide interfaces presents a powerful tool for engineering the charge degree of freedom in strongly correlated materials, which can be utilized to achieve tailored functionalities that are inaccessible in the bulk form. Here, the charge-transfer effect between two strongly correlated oxides, Sm Nd NiO (SNNO) and La Sr MnO (LSMO), is exploited to realize a giant enhancement of the ferroelectric field effect in a prototype Mott field-effect transistor. By switching the polarization field of a ferroelectric Pb(Zr,Ti)O (PZT) gate, nonvolatile resistance modulation in the Mott transistors with single-layer SNNO and bilayer SNNO/LSMO channels is induced. For the same channel thickness, the bilayer channels exhibit up to two orders of magnitude higher resistance-switching ratio at 300 K, which is attributed to the intricate interplay between the charge screening at the PZT/SNNO interface and the charge transfer at the SNNO/LSMO interface. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy studies of SNNO/LSMO heterostructures reveal about 0.1 electron per 2D unit cell transferred between the interfacial Mn and Ni layers, which is corroborated by first-principles density functional theory calculations. The study points to an effective strategy to design functional complex oxide interfaces for developing high-performance nanoelectronic and spintronic applications.

Interfacial Charge Engineering in Ferroelectric-Controlled Mott Transistors.

We review the pyroelectric properties and electronic structure of Li₂B₄O₇(110) and Li₂B₄O₇(100) surfaces. There is evidence for a pyroelectric current along the [110] direction of stoichiometric Li₂B₄O₇ so that the pyroelectric coefficient is nonzero but roughly 10³ smaller than along the [001] direction of spontaneous polarization. Abrupt decreases in the pyroelectric coefficient along the [110] direction can be correlated with anomalies in the elastic stiffness contributing to the concept that the pyroelectric coefficient is not simply a vector but has qualities of a tensor, as expected. The time dependent surface photovoltaic charging suggests that surface charging is dependent on crystal orientation and doping, as well as temperature.

Peter A. Dowben

Department of Physics

University of Nebraska-Lincoln

Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications

Peter A. Dowben

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Physics

University of Nebraska-Lincoln

Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications

Department of Physics