a-silicon-tipped-fiber-optic-sensing-platform-with-high-resolution

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response

In this article, we introduce an innovative and practically promising fiber-optic sensing platform (FOSP) that we proposed and demonstrated recently. This ...

Michigan State University

University of Nebraska-Lincoln

We report a fiber-optic bolometer based on a high-finesse silicon Fabry-Perot interferometer (FPI). The silicon FPI absorbs and converts the incident radiation into temperature variations, which are interrogated by the shift of the reflection spectrum of the FPI. The FPI is a silicon pillar with one side coated with a high-reflectivity dielectric mirror and the other side coated with a gold mirror. A multimode fiber collimator is applied between the FPI and lead-in single-mode fiber to reduce the round-trip diffraction loss, giving rise to a high-finesse of 35 of the FPI. The sensor is demodulated using a low-cost distributed feedback diode laser. A dummy bolometer was used to effectively reduce the common noises from the laser wavelength drift and ambient temperature variations. Experimental results show that, compared with a previously reported fiber-optic bolometer, the one reported here has a 5-fold decrease in noise and a 7-fold increase in responsivity with a noise equivalent power density (NEPD) of 0.27 W/m, which is comparable with the NEPDs of the state-of-the-art resistive bolometers.

Ming Han

Department of Electrical and Computer Engineering

Michigan State University

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response

Ming Han

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Electrical and Computer Engineering

Michigan State University

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response

Department of Electrical and Computer Engineering