x-ray-beam-induced-current-measurements-for-multi-modal-x-ray

X-ray Beam Induced Current Measurements for Multi-Modal X-ray Microscopy of Solar Cells

X-ray beam induced current (XBIC) measurements allow mapping of&#160;the nanoscale performance of electronic devices such as solar cells. Ideally, XBIC is ...

Arizona State University

The study of a multilayered and multicomponent system by spatially resolved X-ray fluorescence microscopy poses unique challenges in achieving accurate quantification of elemental distributions. This is particularly true for the quantification of materials with high X-ray attenuation coefficients, depth-dependent composition variations and thickness variations. A widely applicable procedure for use after spectrum fitting and quantification is described. This procedure corrects the elemental distribution from the measured fluorescence signal, taking into account attenuation of the incident beam and generated fluorescence from multiple layers, and accounts for sample thickness variations. Deriving from Beer-Lambert's law, formulae are presented in a general integral form and numerically applicable framework. The procedure is applied using experimental data from a solar cell with a Cu(In,Ga)Seabsorber layer, measured at two separate synchrotron beamlines with varied measurement geometries. This example shows the importance of these corrections in real material systems, which can change the interpretation of the measured distributions dramatically.

Bradley West

School of Electrical,
Computer and Energy Engineering,
School of Electrical, Computer and Energy Engineering

Arizona State University

X-ray Beam Induced Current Measurements for Multi-Modal X-ray Microscopy of Solar Cells

Bradley West

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}School of Electrical,Computer and Energy Engineering,School of Electrical, Computer and Energy Engineering

Arizona State University

X-ray Beam Induced Current Measurements for Multi-Modal X-ray Microscopy of Solar Cells

School of Electrical,
Computer and Energy Engineering,
School of Electrical, Computer and Energy Engineering