Liam M. Grover

An analytical Micro CT methodology for quantifying inorganic dentine debris following internal tooth preparation.

Dissolution of bio-active dentine matrix components by mineral trioxide aggregate.

Frozen delivery of brushite calcium phosphate cements.

Particle seeding enhances interconnectivity in polymeric scaffolds foamed using supercritical CO(2).

Reversible mitotic and metabolic inhibition following the encapsulation of fibroblasts in alginate hydrogels.

Comparing the efficacy of three bioceramic matrices for the release of vancomycin hydrochloride.

Cell encapsulation using biopolymer gels for regenerative medicine.

Alginate-loaded liposomes can protect encapsulated alkaline phosphatase functionality when exposed to gastric pH.

Factors affecting the longevity and strength in an in vitro model of the bone-ligament interface.

Polymer film formulations for the preparation of enteric pharmaceutical capsules.

Degradation of polysaccharide hydrogels seeded with bone marrow stromal cells.

Effect of calcium alginate concentration on viability and proliferation of encapsulated fibroblasts.

Modification of alginate degradation properties using orthosilicic acid.

Monitoring sinew contraction during formation of tissue-engineered fibrin-based ligament constructs.

Pulsed-low intensity ultrasound enhances extracellular matrix production by fibroblasts encapsulated in alginate.

Calcium-alginate hydrogel-encapsulated fibroblasts provide sustained release of vascular endothelial growth factor.

Alginate hydrogel has a negative impact on in vitro collagen 1 deposition by fibroblasts.

Brushite cement additives inhibit attachment to cell culture beads.

Encapsulation and culture of mammalian cells including corneal cells in alginate hydrogels.

The effect of amorphous pyrophosphate on calcium phosphate cement resorption and bone generation.

Structural changes to resorbable calcium phosphate bioceramic aged in vitro.

Reciprocating root canal technique induces greater debris accumulation than a continuous rotary technique as assessed by 3-dimensional micro-computed tomography.

Imaging the hard/soft tissue interface.

Preparation and characterisation of nanophase Sr, Mg, and Zn substituted hydroxyapatite by aqueous precipitation.

Development of a synovial fluid analogue with bio-relevant rheology for wear testing of orthopaedic implants.

Mechanical properties of alginate hydrogels manufactured using external gelation.

Combined decellularisation and dehydration improves the mechanical properties of tissue-engineered sinews.

Exploiting cell-mediated contraction and adhesion to structure tissues in vitro.

Nanoscale crystallinity modulates cell proliferation on plasma sprayed surfaces.

A bio-hybrid tactile sensor incorporating living artificial skin and an impedance sensing array.

The effects of cobalt-chromium-molybdenum wear debris in vitro on serum cytokine profiles and T cell repertoire.

In vitro degradation and in vivo resorption of dicalcium phosphate cement based grafts.

Pulsed low-intensity ultrasound increases proliferation and extracelluar matrix production by human dermal fibroblasts in three-dimensional culture.

Modification of gellan gum with nanocrystalline hydroxyapatite facilitates cell expansion and spontaneous osteogenesis.

Bedside, Benchtop, and Bioengineering: Physicochemical Imaging Techniques in Biomineralization.

Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants.

PDGF is a potent initiator of bone formation in a tissue engineered model of pathological ossification.

Investigation of Formulation and Process of Lyophilised Orally Disintegrating Tablet (ODT) Using Novel Amino Acid Combination.

Vesicles in Nature and the Laboratory: Elucidation of Their Biological Properties and Synthesis of Increasingly Complex Synthetic Vesicles.

Biologically Analogous Calcium Phosphate Tubes from a Chemical Garden.

Suspended Manufacture of Biological Structures.

Bearings in Hip Arthroplasty: Joint Registries vs Precision Medicine: Review Article.

Reactive oxygen: A novel antimicrobial mechanism for targeting biofilm-associated infection.

Calcium pre-conditioning substitution enhances viability and glucose sensitivity of pancreatic beta-cells encapsulated using polyelectrolyte multilayer coating method.

Characterisation of a novel poly (ether ether ketone)/calcium sulphate composite for bone augmentation.

Resistin promotes the abnormal Type I collagen phenotype of subchondral bone in obese patients with end stage hip osteoarthritis.

Advances in keratinocyte delivery in burn wound care.

Evaluating the swelling, erosion, and compaction properties of cellulose ethers.

Anisotropic dehydration of hydrogel surfaces.

Interfacial Mineral Fusion and Tubule Entanglement as a Means to Harden a Bone Augmentation Material.

Formulation and viscoelasticity of mineralised hydrogels for use in bone-cartilage interfacial reconstruction.

Structuring of Hydrogels across Multiple Length Scales for Biomedical Applications.

A novel method for the collection of nanoscopic vesicles from an organotypic culture model.

Fabrication of optimized skin biomimics for improved interfacial retention of cosmetic emulsions.

Matrix degradation in osteoarthritis primes the superficial region of cartilage for mechanical damage.

Influence of Cobalt Ions on Collagen Gel Formation and Their Interaction with Osteoblasts.

The design of additively manufactured lattices to increase the functionality of medical implants.

Formulation of a covalently bonded hydroxyapatite and poly(ether ether ketone) composite.

Sustained release of decorin to the surface of the eye enables scarless corneal regeneration.

Organotypic Culture of Bone-Like Structures Using Composite Ceramic-Fibrin Scaffolds.

Physical Structuring of Injectable Polymeric Systems to Controllably Deliver Nanosized Extracellular Vesicles.

A self-healing hydrogel eye drop for the sustained delivery of decorin to prevent corneal scarring.

Geometric confinement is required for recovery and maintenance of chondrocyte phenotype in alginate.

Osteoblast-Derived Vesicle Protein Content Is Temporally Regulated During Osteogenesis: Implications for Regenerative Therapies.

Improving our understanding of metal implant failures: Multiscale chemical imaging of exogenous metals in ex-vivo biological tissues.

Evidence of Intrinsic Impairment of Osteoblast Phenotype at the Curve Apex in Girls With Adolescent Idiopathic Scoliosis.

Antimicrobial emulsions: Formulation of a triggered release reactive oxygen delivery system.

Rubidium-containing mesoporous bioactive glass scaffolds support angiogenesis, osteogenesis and antibacterial activity.

Critical and diverse roles of phosphates in human bone formation.

Chemobrionic structures in tissue engineering: self-assembling calcium phosphate tubes as cellular scaffolds.

Corrigendum: Osteoblast-Derived Vesicle Protein Content Is Temporally Regulated During Osteogenesis: Implications for Regenerative Therapies.

Filling the Gap: A Correlation between Objective and Subjective Measures of Injectability.

Thiol modification of silicon-substituted hydroxyapatite nanocrystals facilitates fluorescent labelling and visualisation of cellular internalisation.

Enzymatically regulated demineralisation of pathological bone using sodium hexametaphosphate.

The neuroregenerative effects of topical decorin on the injured mouse cornea.

Hexametaphosphate as a potential therapy for the dissolution and prevention of kidney stones.

A novel method for monitoring mineralisation in hydrogels at the engineered hard-soft tissue interface.

Quantification of volume and size distribution of internalised calcium phosphate particles and their influence on cell fate.

Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications.

Formulation of an antimicrobial superabsorbent powder that gels in situ to produce reactive oxygen.

Encapsulation and Fluidization Maintains the Viability and Glucose Sensitivity of Beta-Cells.

Formulation of a reactive oxygen producing calcium sulphate cement as an anti-bacterial hard tissue scaffold.

Trabecular bone organoids: a micron-scale 'humanised' prototype designed to study the effects of microgravity and degeneration.

Formulation of a Composite Nasal Spray Enabling Enhanced Surface Coverage and Prophylaxis of SARS-COV-2.

Formulation of inherently antimicrobial magnesium oxychloride cement and the effect of supplementation with silver phosphate.

Tailoring Therapeutic Responses via Engineering Microenvironments with a Novel Synthetic Fluid Gel.

Repeated exposure of nosocomial pathogens to silver does not select for silver resistance but does impact ciprofloxacin susceptibility.

Hybrid reflection retrieval method for terahertz dielectric imaging of human bone.

Thermosensitive collagen/fibrinogen gels loaded with decorin suppress lesion site cavitation and promote functional recovery after spinal cord injury.

A feasible route for the design and manufacture of customised respiratory protection through digital facial capture.

Fundamental Biomaterial Considerations in the Development of a 3D Model Representative of Primary Open Angle Glaucoma.

A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents.

Low Acyl Gellan as an Excipient to Improve the Sprayability and Mucoadhesion of Iota Carrageenan in a Nasal Spray to Prevent Infection With SARS-CoV-2.

Formulation of an antibacterial topical cream containing bioengineered honey that generates reactive oxygen species.

In-vitro viability of bone scaffolds fabricated using the adaptive foam reticulation technique.

Self-assembled calcium pyrophosphate nanostructures for targeted molecular delivery.

Surface Free Energy Dominates the Biological Interactions of Postprocessed Additively Manufactured Ti-6Al-4V.

Can We Structure Biomaterials to Spray Well Whilst Maintaining Functionality?

Controlled self-assembly of chemical gardens enables fabrication of heterogeneous chemobrionic materials.

Erratum: Publisher's Note: "A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents" [APL Bioeng. , 046103 (2021)].

Hydrogels and Bioprinting in Bone Tissue Engineering: Creating Artificial Stem-Cell Niches for in Vitro Models.

Versatile Microfluidics for Biofabrication Platforms Enabled by an Agile and Inexpensive Fabrication Pipeline.

Mature primary human osteocytes in mini organotypic cultures secrete FGF23 and PTH1-34-regulated sclerostin.