When a beam is subjected to various loads, such as a distributed load, concentrated loads, and a couple moment, it experiences both shear forces and bending moments. To understand the relationship between these two forces, we can analyze an elemental section of the beam and draw a free-body diagram.

Figure 1

For the elemental section of the beam to be in equilibrium, the moment acting on the right side of the section should be higher by a small and finite amount compared to the left side. The distributed load exerts a resultant force at a fractional distance from the section's right end. We can use the equilibrium equation for moment to establish the relationship between the shear and bending moment.

Equation 1

By dividing this equation by Δx and letting Δx approach zero, we determine the slope of the moment diagram, which is equivalent to the shear.

Equation 2

By integrating the distributed load over the elemental section lying between two arbitrary points, we can correlate the change in the bending moment and the area under the shear diagram.

Equation 3

This relationship is essential for understanding how the beam's internal forces respond to external loads and how these forces impact the beam's overall structural behavior.

Tags
Shear ForceBending MomentBeam AnalysisEquilibriumFree body DiagramDistributed LoadConcentrated LoadsCouple MomentMoment DiagramInternal ForcesStructural BehaviorLoad ResponseIntegration

Do Capítulo 7:

article

Now Playing

7.9 : Relação entre o Cisalhamento e o Momento Fletor

Forças Internas

731 Visualizações

article

7.1 : Convenção de Sinal

Forças Internas

1.6K Visualizações

article

7.2 : Força Normal e de Cisalhamento

Forças Internas

1.7K Visualizações

article

7.3 : Momentos de Flexão e Torção

Forças Internas

3.0K Visualizações

article

7.4 : Carregamentos Internos em Elementos Estruturais: Resolução de Problemas

Forças Internas

1.1K Visualizações

article

7.5 : Vigas

Forças Internas

1.1K Visualizações

article

7.6 : Diagrama de Cisalhamento

Forças Internas

508 Visualizações

article

7.7 : Diagrama de Momento Fletor

Forças Internas

757 Visualizações

article

7.8 : Relação entre a Carga Distribuída e o Cisalhamento

Forças Internas

427 Visualizações

article

7.10 : Diagrama de Cisalhamento e Momento Fletor: Resolução de Problemas

Forças Internas

1.1K Visualizações

article

7.11 : Cabo Sujeito a Cargas Concentradas

Forças Internas

684 Visualizações

article

7.12 : Cabo Sujeito a uma Carga Distribuída

Forças Internas

536 Visualizações

article

7.13 : Cabo Sujeito ao seu Peso Próprio

Forças Internas

333 Visualizações

article

7.14 : Cabo: Resolução de Problemas

Forças Internas

272 Visualizações

JoVE Logo

Privacidade

Termos de uso

Políticas

Pesquisa

Educação

SOBRE A JoVE

Copyright © 2025 MyJoVE Corporation. Todos os direitos reservados