The funding for this research project was provided by the Natural Sciences and Engineering Research Council of Canada (NSERC) via a Discovery Grant to YL.

1. Preparation of Reagents and Buffers
<ol>
	<li>0.5 M Ethylenediaminetetraacetic Acid (EDTA)
	<ol>
		<li>In a 2 L beaker, add 186.1 g EDTA to 800 ml of deionized-distilled water (ddH2O). Adjust the pH of the solution to 8.0 using NaOH pellets. Add ddH2O to a final volume of 1.0 L and transfer the solution to an autoclavable glass bottle for autoclaving and store at 4 &#176;C.</li>
	</ol>
	</li>
	<li>10&#215; Tris-borate EDTA (10x TBE)
	<ol>
		<li>In a 4 L plastic beaker, add 432 g Tris-base, 200 ...

<ol>
	<li>Daar, A. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Top+ten+biotechnologies+for+improving+health+in+developing+countries.">Top ten biotechnologies for improving health in developing countries.</a> Nat. Genet. 32, 229-232 (2002).</li><li>Newman, J. D., Turner, A. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Home+blood+glucose+biosensors:+a+commercial+perspective.">Home blood glucose biosensors: a commercial perspective.</a> Biosens. Bioelectron. 20, 2435-2453 (2005).</li><li>Turner, A. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biosensors:+sense+and+sensibility.">Biosensors: sense and sensibility.</a> Chem. Soc. Rev. 42, 3184-3196 (2013).</li><li>Tram, K., Kanda, P., Salena, B. J., Huan, S. Y., Li, Y. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Translating+Bacterial+Detection+by+DNAzymes+into+a+Litmus+Test.">Translating Bacterial Detection by DNAzymes into a Litmus Test.</a> Angew. Chem. Int. Ed. 53, 12799-12802 (2014).</li><li>Ali, M. M., Aguirre, S. D., Lazim, H., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluorogenic+DNAzyme+probes+as+bacterial+indicators.">Fluorogenic DNAzyme probes as bacterial indicators.</a> Angew. Chem. Int. Ed. 50, 3751-3754 (2011).</li><li>Schlosser, K., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biologically+inspired+synthetic+enzymes+made+from+DNA.">Biologically inspired synthetic enzymes made from DNA.</a> Chem. Biol. 16, 311-322 (2009).</li><li>Tuerk, C., Gold, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Systematic+evolution+of+ligand+by+exponential+enrichment:+RNA+ligands+to+bacteriophage+T4+DNA+polymerase.">Systematic evolution of ligand by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase.</a> Science. 249, 505-510 (1990).</li><li>Ellington, A. D., Szostak, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+selection+of+RNA+molecules+that+bind+specific+ligands.">In vitro selection of RNA molecules that bind specific ligands.</a> Nature. 346, 818-822 (1990).</li><li>Breaker, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Making+catalytic+DNAs.">Making catalytic DNAs.</a> Science. 290, 2095-2096 (2000).</li><li>Liu, J., Cao, Z., Lu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+nucleic+acid+sensors.">Functional nucleic acid sensors.</a> Chem. Rev. 109, 1948-1998 (2009).</li><li>Navani, N. K., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nucleic+acid+aptamers+and+enzymes+as+sensors.">Nucleic acid aptamers and enzymes as sensors.</a> Curr. Opin. Chem. Biol. 10, 272-281 (2006).</li><li>Li, J., Lu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+highly+sensitive+and+selective+catalytic+DNA+biosensor+for+lead+ions.">A highly sensitive and selective catalytic DNA biosensor for lead ions.</a> J. Am. Chem. Soc. 122, 10466-10467 (2000).</li><li>Liu, J., Lu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+colorimetric+lead+biosensor+using+DNAzyme-directed+assembly+of+gold+nanoparticles.">A colorimetric lead biosensor using DNAzyme-directed assembly of gold nanoparticles.</a> J. Am. Chem. Soc. 125, 6642-6643 (2003).</li><li>Liu, Z., Mei, S. H. J., Brennan, J. D., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assemblage+of+signaling+DNA+enzymes+with+intriguing+metal+specificity+and+pH+dependence.">Assemblage of signaling DNA enzymes with intriguing metal specificity and pH dependence.</a> J. Am. Chem. Soc. 125, 7539-7545 (2003).</li><li>Liu, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+catalytic+beacon+sensor+for+uranium+with+parts-per-trillion+sensitivity+and+millionfold+selectivity.">A catalytic beacon sensor for uranium with parts-per-trillion sensitivity and millionfold selectivity.</a> Proc. Natl. Acad. Sci. USA. 104, 2056-2061 (2007).</li><li>Huang, P. J., Vazin, M., Liu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+selection+of+a+new+lanthanide-dependent+DNAzyme+for+ratiometric+sensing+lanthanides.">In vitro selection of a new lanthanide-dependent DNAzyme for ratiometric sensing lanthanides.</a> Anal. Chem. 86, 9993-9999 (2014).</li><li>Chiuman, W., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+fluorescent+sensors+engineered+with+catalytic+DNA+'MgZ'+based+on+a+non-classic+allosteric+design.">Simple fluorescent sensors engineered with catalytic DNA 'MgZ' based on a non-classic allosteric design.</a> PLoS One. 2, e1224 (2007).</li><li>Xiang, Y., Lu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+personal+glucose+meters+and+functional+DNA+sensors+to+quantify+a+variety+of+analytical+targets.">Using personal glucose meters and functional DNA sensors to quantify a variety of analytical targets.</a> Nat. Chem. 3, 697-703 (2011).</li><li>Aguirre, S. D., Ali, M. M., Salena, B. J., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+sensitive+DNA+enzyme-based+fluorescent+assay+for+bacterial+detection.">A sensitive DNA enzyme-based fluorescent assay for bacterial detection.</a> Biomolecules. 3, 563-577 (2013).</li><li>Aguirre, S. D., Ali, M. M., Kanda, P., Li, Y. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+Bacteria+Using+Fluorogenic+DNAzymes.">Detection of Bacteria Using Fluorogenic DNAzymes.</a> J. Vis. Exp. (63), e3961 (2012).</li><li>Shen, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+catalytic+DNA+activated+by+a+specific+strain+of+bacterial+pathogen.">A catalytic DNA activated by a specific strain of bacterial pathogen.</a> Angew. Chem. Int. Ed. 54, (2015).</li><li>He, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+specific+recognition+of+breast+tumors+by+an+RNA-cleaving+fluorogenic+DNAzyme+probe.">Highly specific recognition of breast tumors by an RNA-cleaving fluorogenic DNAzyme probe.</a> Anal. Chem. 87, 569-577 (2015).</li><li>Sumner, J. B., Hand, D. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isoelectric+point+of+crystalline+urease.">Isoelectric point of crystalline urease.</a> J. Am. Chem. Soc. 51, 1255-1260 (1929).</li><li>Karplus, P. A., Pearson, M., Hausinger, R. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=70+Years+of+crystalline+urease:+What+have+we+learned.">70 Years of crystalline urease: What have we learned.</a> Acc. Chem. Res. 30, 330-337 (1997).</li><li>Omiccioli, E., Amagliani, G., Brandi, G., Magnani, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+platform+for+Real-Time+PCR+detection+of+Salmonella+spp.,+Listeria+monocytogenes+and+Escherichia+coli+O157+in+milk.">A new platform for Real-Time PCR detection of Salmonella spp., Listeria monocytogenes and Escherichia coli O157 in milk.</a> Food Microbiol. 26, 615-622 (2009).</li><li>Cui, S., Schroeder, C. M., Zhang, D. Y., Meng, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+sample+preparation+method+for+PCR-based+detection+of+Escherichia+coli+O157:H7+in+ground+beef.">Rapid sample preparation method for PCR-based detection of Escherichia coli O157:H7 in ground beef.</a> J. Appl. Microbiol. 95, 129-134 (2003).</li><li>Ibekwe, A. M., Watt, P. M., Grieve, C. M., Sharma, V. K., Lyons, S. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multiplex+fluorogenic+real-time+PCR+for+detection+and+quantification+of+Escherichia+coli+O157:H7+in+dairy+wastewater+wetlands.">Multiplex fluorogenic real-time PCR for detection and quantification of Escherichia coli O157:H7 in dairy wastewater wetlands.</a> Appl. Environ. Microbiol. 68, 4853-4862 (2002).</li><li>Strachan, N. J., Ogden, I. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+sensitive+microsphere+coagulation+ELISA+for+Escherichia+coli+O157:H7+using+Russell's+viper+venom.">A sensitive microsphere coagulation ELISA for Escherichia coli O157:H7 using Russell's viper venom.</a> FEMS Microbiol Lett. 186, 79-84 (2000).</li><li>de Boer, E., Beumer, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methodology+for+detection+and+typing+of+foodborne+microorganisms.">Methodology for detection and typing of foodborne microorganisms.</a> Int. J. Food Microbiol. 50, 119-130 (1999).</li><li>Gracias, K. S., McKillip, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+conventional+detection+and+enumeration+methods+for+pathogenic+bacteria+in+food.">A review of conventional detection and enumeration methods for pathogenic bacteria in food.</a> Can. J. Microbiol. 50, 883-890 (2004).</li></ol>

The authors have nothing to disclose.

The translation of the action of the RNA cleavage activity of a bacterium-responsive DNAzyme to a litmus test is made possible through the use of urease and magnetic separation, as illustrated by Figure 1. Although the demonstration of the modified litmus test for bacterial detection is done with an E. coli-dependent RNA-cleaving DNAzyme,5,19,20 the design can be generally extended for any RNA-cleaving DNAzyme. Given the great availability of RNA-cleaving DNAzymes for different analyt...

Bacterial pathogens are one of the major causes of global morbidity and mortality. Outbreaks from hospital-acquired infections, food-borne pathogens, and bacterial contaminants in the environment pose serious and on-going threats to public health and safety. To prevent these outbreaks, effective tools are needed that permit pathogen detection in a timely fashion under a variety of settings. Simple but still effective tests that are portable and cost-effective are greatly coveted, especially in regions that are susceptible to outbreaks but cannot afford expensive testing facilities.1-3 Although there exists a multitude of methods to detect bacteria, many of them are not suitable as screening or on-site testing tools because they require long test times, expensive instruments and complicated testing procedures. 
Colorimetric tests are particularly attractive for point-of-care or field applications as color changes can be easily detected by the naked eye. The litmus test for pH is simple, quick, and effective. Although it is a very old technology, it is still widely used today because of its simplicity and effectiveness. Surprisingly, this simple test had never been modified to achieve the detection of other analytes before we recently developed an approach of modifying this test for E. coli testing.4
The expanded litmus test for E. coli employs three additional components: an E. coli activated RNA-cleaving DNAzyme (EC1), 5 urease, and magnetic beads. DNAzymes refer to synthetic single-stranded DNA molecules with catalytic activity.6 They can be isolated from random-sequence DNA pools using in vitro selection.7,8 They are highly stable and can be produced cost-effectively using high-efficiency automated DNA synthesis.9 For these reasons, DNAzymes, particularly RNA-cleaving DNAzymes, have been widely examined for biosensing applications.6,10,11 RNA-cleaving DNAzyme sensors have been developed to detect metal ions,12-16 small molecules,17,18 bacterial pathogens5,19-21 and cancer cells.22 Given the great availability of target-induced RNA-cleaving DNAzymes, any assay that utilizes a DNAzyme can be potentially expanded to detect a diverse range of analytes.
Urease is chosen for its ability to hydrolyze urea into ammonia,23,24 resulting in a pH increase. Urease is also highly efficient, stable and amenable for conjugation to other biomolecules. Therefore, we postulated that a conjugate of an RNA-cleavage DNAzyme with urease would allow the use of litmus test for the detection of other targets.5
The action of the RNA-cleaving DNAzyme is relayed to urease-mediated increase of pH through the use of magnetic beads that are immobilized with the DNAzyme-urease conjugate. Because the activity of the DNAzyme under investigation is strictly dependent on E. coli, the presence of this bacterium in the test solution will result in the release of urease from the magnetic beads to the solution, which is then taken and used to hydrolyze urea in a reporter solution that contains a pH-sensitive dye. The final outcome of this procedure is a color change that can be conveniently reported by the dye or pH paper.

<table border="0" cellpadding="0" cellspacing="0" width="786">
	<tbody>
		<tr height="24">
			<td height="24" style="height:24px;width:275px;">Ethylenediaminetetraacetic acid (EDTA)</td>
			<td style="width:183px;">VWR AMRESCO</td>
			<td style="width:163px;">0105</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sodium Hydroxide (NaOH) pellets</td>
			<td>BIO BASIC CANADA INC.</td>
			<td>SB6789</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Tris-base</td>
			<td>VWR AMRESCO</td>
			<td>0497</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Boric acid</td>
			<td>AMRESCO</td>
			<td>0588</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Urea</td>
			<td>VWR AMRESCO</td>
			<td>M123</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">40% acrylamide/bisacrylamide (29:1) solution</td>
			<td>BIO BASIC CANADA INC.</td>
			<td>A0007</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sucrose</td>
			<td>Bioshop Canada inc.</td>
			<td>SUC507</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Bromophenol blue</td>
			<td>Bioshop Canada inc.</td>
			<td>BRO777</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Xylenecyanol FF</td>
			<td>SIGMA-ALDRICH</td>
			<td>X-4126</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">10% sodium dodecyl sulfate</td>
			<td>Bioshop Canada inc.</td>
			<td>SDS001</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Hydrochloric Acid (HCl)</td>
			<td>CALEDON LABORATORIES LTD</td>
			<td>6026</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sodium Chloride (NaCl)</td>
			<td>Bioshop Canada inc.</td>
			<td>SOD001</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES)</td>
			<td>Bioshop Canada inc.</td>
			<td>HEP001</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Magnesium Chloride (II) hexahydrate</td>
			<td>VWR AMRESCO</td>
			<td>0288</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Tween 20</td>
			<td>Bioshop Canada inc.</td>
			<td>TW508</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Adenosine Triphospahte (ATP)</td>
			<td>AMRESCO</td>
			<td>0220</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sodium Acetate trihydrate (NaOAc)</td>
			<td>SIGMA-ALDRICH</td>
			<td>S8625</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Ethanol</td>
			<td>Commercial Alcohols</td>
			<td>P016EAAN</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Tetramethyleneethylenediamine (TEMED)</td>
			<td>AMRESCO</td>
			<td>0761</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">10% Ammonium persulfate (APS)</td>
			<td>BIO BASIC CANADA INC.</td>
			<td>AB0072</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Succinimidyl 4-(N-maleimidomethyl) cyclohexane-1-carboxylate (SMCC)</td>
			<td>ThermoFisher SCIENTIFIC</td>
			<td>22360</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Dimethyl sulfoxide (DMSO)</td>
			<td>CALEDON LABORATORIES</td>
			<td>803540</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Urease</td>
			<td>SIGMA-ALDRICH</td>
			<td>U0251</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">1&#215; Phosphate Buffered Saline (PBS)</td>
			<td>ThermoFisher SCIENTIFIC</td>
			<td>70011-069</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">0.04% Phenol red</td>
			<td>SIGMA-ALDRICH</td>
			<td>P3532</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">10&#215;T4 polynucleotide kinase reaction buffer</td>
			<td>Lucigen</td>
			<td>30061-1</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">10&#215; T4 DNA ligase reaction buffer</td>
			<td>Bio Basics Canada</td>
			<td>B1122-B</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">T4 DNA ligase (5 U/uL)</td>
			<td>Thermo Fischer Scientific</td>
			<td>B1122</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Luria Bertani (LB) Broth</td>
			<td>AMRESCO</td>
			<td>J106</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Agar</td>
			<td>AMRESCO</td>
			<td>J637</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">T4 polynucleotide kinase (10 U/uL)</td>
			<td>Lucigen</td>
			<td>30061-1</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">E. coli K12 (MG1655)</td>
			<td>ATCC</td>
			<td>ATCC700926</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Centrifuge</td>
			<td>Beckman Coulter, Inc.</td>
			<td>392187</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Glass plates</td>
			<td>CBS scientific</td>
			<td>ngp-250nr</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">0.75 mm thick spacers</td>
			<td>CBS scientific</td>
			<td>VGS-0725r</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">12-well comb</td>
			<td>CBS scientific</td>
			<td>VGC-7512</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">UV Lamp</td>
			<td>UVP</td>
			<td>95-0017-09</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Spectrophotometer (NanoVue)</td>
			<td>GE Healthcare</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Metal plate</td>
			<td>CBS scientific</td>
			<td>CPA165-250</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Vortex</td>
			<td>VWR International</td>
			<td>58816-123</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Gel electrophoresis apparatus</td>
			<td>CBS scientific</td>
			<td>ASG-250</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Petri dishes</td>
			<td>VWR International</td>
			<td>25384-342</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">100 kDa MWCO centrifugal filters</td>
			<td>EMD Millipore</td>
			<td>UFC510024</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Magnetic Bead (BioMag)</td>
			<td>Bangs Laboratories Inc</td>
			<td>BM568</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Magnetic Seperation Rack</td>
			<td>New England BioLabs</td>
			<td>S1506S</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Microfuge tubes</td>
			<td>Sarstedt</td>
			<td>72.69</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Syringe filter (0.22 um)</td>
			<td>VWR International</td>
			<td>28145-501</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">14 mL culture tube</td>
			<td>VWR International</td>
			<td>60818-725</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Cell culture incubator</td>
			<td>Eppendorf Scientific</td>
			<td>M13520000</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Branson Ultrasonic cleaner</td>
			<td>Branson</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Camera (Canon Powershot G11)</td>
			<td>Canon</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">50 mL conical tube</td>
			<td>VWR International</td>
			<td>89004-364</td>
			<td></td>
		</tr>
	</tbody>
</table>

colorimetric detection of bacteria using litmus test

There are increasing demands for simple but still effective methods that can be used to detect specific pathogens for point-of-care or field applications. Such methods need to be user-friendly and produce reliable results that can be easily interpreted by both specialists and non-professionals. The litmus test for pH is simple, quick, and effective as it reports the pH of a test sample via a simple color change. We have developed an approach to take advantage of the litmus test for bacterial detection. The method exploits a bacterium-specific RNA-cleaving DNAzyme to achieve two functions: recognizing a bacterium of interest and providing a mechanism to control the activity of urease. Through the use of magnetic beads immobilized with a DNAzyme-urease conjugate, the presence of bacteria in a test sample is relayed to the release of urease from beads to solution. The released urease is transferred to a test solution to hydrolyze urea into ammonia, resulting in an increase of pH that can be visualized using the classic litmus test.

The principle of the bacterial litmus test is explained in Figure 1. The test uses three key materials: an RNA-cleaving DNAzyme that is activated by a specific bacterium, urease and magnetic beads. The DNAzyme is used as the molecular recognition element to achieve highly specific detection of a bacterium of interest. Urease and magnetic beads are used to achieve signal transduction of the RNA-cleavage activity of the DNAzyme. This involves the creation of magnetic beads ...

Watch this Scientific Journal Video about Colorimetric Detection of Bacteria Using Litmus Test at JoVE.com

Colorimetric Detection of Bacteria Using Litmus Test

We describe a protocol for colorimetric detection of E. coli using a modified litmus test that takes advantage of an RNA-cleaving DNAzyme, urease, and magnetic beads.

There are increasing demands for simple but still effective methods that can be used to detect specific pathogens for point-of-care or field applications. ...

The overall goal of this experiment is to demonstrate a simple modified litmus test for bacterial detection. This method describes how an E.coli-activated RNA-cleaving DNA enzyme can be coupled with a urease-based signal trandsduction platform to generate a color change in response to E.coli. The two main advantages of this technique are the simplicity of the test and its applicability to other analyte-responsive RNA-cleaving DNA enzymes.Demonstrating the procedure will be Seperh Manchehry and Dingran Chang, graduate students from Dr.Yingfu Li's lab at McMaster University. After preparing reagents and buffers according to the text protocol, prepare a stock solution of succinimidyl 4-cyclohexane-1-carboxylate, or SMCC, by dissolving one milligram of SMCC in 676 microliters of DMSO. Vortex and place on ice until use.Dissolve one milligram of urease in milliliter of 1x PBS and also place that on ice until use. To synthesize urease DNA, or UrDNA, add 10 microliters of 100 micromolar LD1 to a 2.5 milliliter microfuge tube. Then, add 140 microliters of doubly-distilled water and 40 microliters of 10x PBS and vortex.Next, add 80.5 microliters of SMCC stock and 159.5 microliters of DMSO. Then, vortex again and use a benchtop centrifuge to briefly spin. Incubate the reaction at 37 degrees Celsius in an incubator or a heat block for 60 minutes.Following the incubation, add 200 microliters of 1x PBS, 60 microliters of three-molar sodium acetate, and 1.5 milliliters of cold 100%ethanol to the tube. Mix by vortexing, and incubate the reaction at minus 20 degrees Celsius for 30 minutes. Centrifuge the solution at 20, 000 times g and four degrees Celsius for 20 minutes.Then, remove the supernatant and dry the pellet under vacuum. To the dried pellet, add 400 microliters of urease stock and incubate at room temperature for 5 hours. Transfer 200 microliters of crude conjugate to a pre-washed 100, 000 molecular weight cutoff centrifugal filter column.Centrifuge the column at 14, 000 times g for five minutes. Transfer the remaining 200 microliters of crude conjugate to the column and centrifuge at 14, 000 times g for five minutes. Then, remove the column and place it upside down in a new two-milliliter microfuge collection tube.Centrifuge the inverted column and tube at 1, 000 times g for two minutes. After removing the collection tube, add 30 microliters of 1x PBS to the centrifugal column to wash the membrane for additional recovery of conjugates. Invert the column again and place it back into the collection tube.Centrifuge the column at 1, 000 times g for two minutes. Remove and dispose of the column. Store the UrDNA at four degrees Celsius until use.To assemble an E.coli-activated RNA-cleaving DNAzyme, or EC1, and UrDNA onto magnetic beads, mix the magnetic bead stock well and transfer 100 microliters of bead suspension to a 1.5 milliliter microfuge tube. Then, place the tube on a magnetic rack holder for isolating the beads. Remove the supernatant by pipetting and add 150 microliters of binding buffer, or BB, to the tube.Remove the tube from the holder and carefully tap the tube to re-suspend the beads into a homogeneous solution. After repeating the BB wash two more times with the beads in suspension with BB, add 10 microliters of 10 micromolar EC1. Carefully mix by tapping on the tube.Incubate the solution with mild shaking for 30 minutes. To avoid aggregation of the beads, tap on the tube every two to three minutes. Next, place the microfuge tube back on the magnetic rack to isolate the beads and remove the supernatant by pipetting.Then, use 150 microliters of BB to wash the beads three times. Once the washing is complete, suspend the beads in a total of 150 microliters of BB.To this solution, add 15 microliters of UrDNA and heat the sample at 45 degrees Celsius for two minutes, then cool the solution to room temperature and incubate for two hours. Place the microfuge tube back on the magnetic rack to isolate the beads and remove the supernatant by pipetting.Add 100 microliters of reaction buffer, or RB, then remove the tube from the magnetic rack and carefully re-suspend the beads. After preparing E.coli cells according to the text protocol, pre-wash a 1.5 milliliter microfuge tube by adding and vortexing 100 microliters of RB.Then, discard the buffer. Add 15 microliters of assembled EC1 to the washed tube, then place the tube on the magnetic rack and aspirate the supernatant.Remove the tube from the rack, add 100 microliters of RB, and carefully re-suspend the magnetic beads. After using RB to wash the beads two more times and removing the RB, add 10 microliters of the E.coli sample to the tube and gently mix the contents by tapping on the tube. Then, incubate the reaction at room temperature for one hour.After the incubation, add 90 microliters of doubly-distilled water and place the tube on the magnetic rack. Following approximately three minutes of magnetic separation, carefully transfer 85 microliters of the supernatant to a 0.5 milliliter microfuge tube. It is very important to pipette the solution carefully without taking up any of the magnetic beads.These beads are loaded with urease and will generate a false positive signal. Add 15 microliters of 0.04%Phenol red and 100 microliters of substrate solution. Then, take photographs at specific time intervals to record a color change.The starting color of the litmus test must be yellow, reflecting a solution pH below 5.5. If necessary, the starting pH of the litmus test can be adjusted with a weak buffer, such as one millimolar sodium acetate buffer at pH five. This figure shows the results of the bacterial litmus test, where E.coli-activated RNA-cleaving DNAzyme EC1 was used as the DNAzyme and Phenol red was used as the pH indicator.As shown by the lack of color change in the absence of E.coli, EC1 is highly specific and exhibits minimal activity towards other bacteria. The depth of color change is dependent both on the number of E.coli cells used in the DNAzyme activation step and on the time allowed for the urea hydrolysis step. More E.coli cells result in a stronger color change, and a longer time for urea hydrolysis allows for the detection of a smaller number of cells.This graph shows the pH change as monitored using a handheld pH meter. The presence of 10 to the seven E.coli cells resulted in a gradual increase in pH by three units within 10 minutes. In contrast, the absence of E.coli did not cause detectable pH changes in the same conditions.Once mastered, this technique can be done in two hours if it is performed properly. While attempting this procedure, it is important to remember that urease is very active, and poor washing or contamination will lead to a false positive. Following this procedure, this method can be performed to test for E.coli in more relevant conditions, such as testing for environmental water quality.After watching this video, you should have a good understanding for taking advantage of a simple litmus test for E.coli testing. Don't forget that this test can be used to detect pathogenic E.coli, which is extremely hazardous. You need to take biosafety training before conducting any of the tests for pathogenic bacteria.

colorimetric-detection-of-bacteria-using-litmus-test

Research

JoVE Journal

Biology

9.1K visualizações.  McMaster University. The overall goal of this experiment is to demonstrate a simple modified litmus test for bacterial detection. This method describes how an E.coli-activated RNA-cleaving DNA enzyme can be coupled with a urease-based signal trandsduction platform to generate a color change in response to E.coli. The two main advantages of this technique are the simplicity of the test and its applicability to other analyte-responsive RNA-cleaving DNA enzymes.Demonstrating the procedure will be Seperh Manch...