<meta charset="utf8"></head><body>Estudo de ligantes de receptores ativados por protease em células endoteliais

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Cell Culture Reagents</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Adherent EA.hy926 cells</td>
			<td>ATCC</td>
			<td>CRL-2922</td>
			<td></td>
		</tr>
		<tr>
			<td>CellStripper cell dissociation reagent</td>
			<td>Corning</td>
			<td>25-056-CI</td>
			<td>Trypsin can optionally be used, but should definitely be avoided with PAR2 assays.</td>
		</tr>
		<tr>
			<td>Dulbecco&#39;s Modified Eagle Medium (DMEM) w/phenol red</td>
			<td>Corning</td>
			<td>10-013-CV</td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal Bovine Serum (FBS)</td>
			<td>Avantor</td>
			<td>97068-091</td>
			<td></td>
		</tr>
		<tr>
			<td>Gelatin from porcine skin</td>
			<td>MilliporeSigma</td>
			<td>G2500</td>
			<td>Use to make an aqueous 0.4% (w/v) solution with deionized water. Autoclave before use to sterilize.</td>
		</tr>
		<tr>
			<td>Pen/Strep (100X)</td>
			<td>Corning</td>
			<td>30-002-CI</td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphate-buffered saline (PBS)</td>
			<td>Corning</td>
			<td>21-040-CV</td>
			<td></td>
		</tr>
		<tr>
			<td>Trypan Blue (0.4% w/v)</td>
			<td>Corning</td>
			<td>25-900-CI</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium Mobilization Reagents</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES)</td>
			<td>Thermo</td>
			<td>172571000</td>
			<td></td>
		</tr>
		<tr>
			<td>Bovine serum albumin (BSA)</td>
			<td>Avantor</td>
			<td>97061-420</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride dihydrate</td>
			<td>Thermo</td>
			<td>42352-0250</td>
			<td></td>
		</tr>
		<tr>
			<td>Dimethyl sulfoxide</td>
			<td>Thermo</td>
			<td>J66650-AD</td>
			<td></td>
		</tr>
		<tr>
			<td>Fluo-4/AM</td>
			<td>Invitrogen</td>
			<td>F14201</td>
			<td></td>
		</tr>
		<tr>
			<td>Hank&#39;s balanced salt solution (Ca/Mg/phenol-red free)</td>
			<td>Corning</td>
			<td>21-022-CV</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium chloride hexahydrate</td>
			<td>MilliporeSigma</td>
			<td>M2393</td>
			<td></td>
		</tr>
		<tr>
			<td>Pluronic F-127 (Poloxamer 407)</td>
			<td>Spectrum Chemical</td>
			<td>P1166</td>
			<td></td>
		</tr>
		<tr>
			<td>Probenecid</td>
			<td>TCI America</td>
			<td>P1975</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium hydroxide</td>
			<td>VWR International</td>
			<td>BDH9292</td>
			<td></td>
		</tr>
		<tr>
			<td>TFLLRN-NH2 (TFA salt)</td>
			<td></td>
			<td></td>
			<td>Prepared by Trudy Holyst at the Versiti Blood Research Institute</td>
		</tr>
		<tr>
			<td>Materials</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>96-well culture-treated, black-walled, clear bottom assay plate</td>
			<td>Corning</td>
			<td>3603</td>
			<td>with transparent lids</td>
		</tr>
		<tr>
			<td>Centrifuge tube, 15 mL</td>
			<td>Avantor</td>
			<td>89039-664</td>
			<td></td>
		</tr>
		<tr>
			<td>Centrifuge tube, 50 mL</td>
			<td>Avantor</td>
			<td>89039-656</td>
			<td></td>
		</tr>
		<tr>
			<td>Culture flask, T-75</td>
			<td>Corning</td>
			<td>353136</td>
			<td>tissue culture treated</td>
		</tr>
		<tr>
			<td>Disposable reagent reservoir, 50 mL</td>
			<td>Corning</td>
			<td>RES-V-50-S</td>
			<td></td>
		</tr>
		<tr>
			<td>Enspire plate reader</td>
			<td>Perkin Elmer</td>
			<td></td>
			<td>Discontinued</td>
		</tr>
		<tr>
			<td>Microcentrifuge tube, 1.5 mL</td>
			<td>Avantor</td>
			<td>20170-038</td>
			<td></td>
		</tr>
		<tr>
			<td>Pasteur pipette, 9&#34;</td>
			<td>Fisher</td>
			<td>13-678-6B</td>
			<td>must be sterilized</td>
		</tr>
		<tr>
			<td>PCR tube strip with separate flat cap strips</td>
			<td>Avantor</td>
			<td>76318-802</td>
			<td></td>
		</tr>
		<tr>
			<td>Pipette tips, 20 &#181;L</td>
			<td>Biotix</td>
			<td>63300042</td>
			<td>sterile, filtered tips</td>
		</tr>
		<tr>
			<td>Pipette tips, 200 &#181;L</td>
			<td>Biotix</td>
			<td>63300044</td>
			<td>sterile, filtered tips</td>
		</tr>
		<tr>
			<td>Pipette tips, 1250 &#181;L</td>
			<td>Biotix</td>
			<td>63300047</td>
			<td>sterile, filtered tips</td>
		</tr>
		<tr>
			<td>Prism</td>
			<td>GraphPad</td>
			<td></td>
			<td>volume 6 used</td>
		</tr>
		<tr>
			<td>Serological pipette, 5 mL</td>
			<td>Tradewinds Direct</td>
			<td>&#160;07-5005</td>
			<td></td>
		</tr>
		<tr>
			<td>Serological pipette, 10 mL</td>
			<td>Tradewinds Direct</td>
			<td>&#160;07-5010</td>
			<td></td>
		</tr>
		<tr>
			<td>Serological pipette, 25 mL</td>
			<td>Tradewinds Direct</td>
			<td>&#160;07-5025</td>
			<td></td>
		</tr>
	</tbody>
</table>

characterizing modulators of protease-activated receptors with a calcium mobilization assay using a plate reader

Protease-activated receptors (PARs)1,2,3 are a subfamily of class A G protein-coupled receptors (GPCRs) that are expressed in a variety of cell types, including platelets and endothelial cells4,5,6,7. Unlike the majority of GPCRs, PARs have a unique intramolecular mode of activation. Most GPCRs are activated by soluble ligands interacting with a distinct binding pocket, but PARs are activated by the proteolytic cleavage of the N-terminus, which results in a new tethered ligand that can interact with the extracellular loop 2 domain on the surface of a cell6,8,9. This interaction activates the receptor and can initiate several signaling pathways, promoting effects such as inflammation and platelet activation4,10,11,12. Different proteases can activate PARs through cleavage at unique sites on the N-terminus, revealing different tethered ligands (TL) that stabilize receptor conformations, which initiate different signaling pathways9,13,14,15. For example, in the most well-studied member of the subfamily, PAR1, cleavage by thrombin is used to support numerous biological processes, including platelet activation and leukocyte recruitment to the endothelium, but can lead to deleterious effects when the receptor is overexpressed or overactivated4,16,17,18,19,20,21. Conversely, cleavage by activated protein C (aPC) can promote anti-inflammatory effects and maintenance of endothelial barriers15,22,23,24,25,26,27,28,29. PARs can also be activated by peptide analogs of the TLs in an intermolecular fashion13,30,31. These peptides are routinely used to measure PAR inhibition (modulation) in place of PAR-targeting proteases, and they are used in this protocol.
Numerous disorders are associated with pathological PAR1 signaling, including sepsis22,32, cardiovascular disease33,34,35,36,37,38, kidney disease39,40,41,42, sickle cell disease43, fibrosis44, osteoporosis and osteoarthritis45,46, neurodegeneration47,48,49,50,51, and cancer52,53,54,55,56,57,58,59. Antagonists of PAR1 have been studied since the 1990s as antiplatelet agents for cardiovascular disease, and the growing list of diseases associated with the receptor necessitates the identification of novel ligands for use as biological probes (tool compounds) or as potential therapeutics. Currently, there is only one FDA-approved PAR1 antagonist, vorapaxar, which is used to treat coronary artery disease in high-risk patients34,36,37,60. An alternative PAR1 antagonist, the pepducin PZ-128, completed a successful phase II study to prevent thrombosis in cardiac catheterization patients38. The Dockendorff group has focused on the medicinal chemistry and pharmacology of a separate class of small molecules, PAR1 ligands known as parmodulins61,62. Unlike reported PAR1 antagonists such as vorapaxar, parmodulins are allosteric, biased modulators of PAR1 that selectively block the G&#945;q pathway while promoting cytoprotective effects similar to aPC. Unlike potent orthosteric PAR1 antagonists such as vorapaxar, published parmodulins are also reversible63,64,65.
Initially, parmodulins were identified by Flaumenhaft and coworkers for&#160;their ability to inhibit P-selectin expression or granule secretion in platelets61,66. However, an alternative method was required to study the effects of parmodulins on endothelial cells. One common method to monitor GPCR-related signaling is to measure intracellular Ca2+ mobilization, an important secondary messenger that can be measured using a suitable intracellular calcium-binding dye67,68. Substantial evidence has been provided showing that calcium mobilization induced by PAR1 is through the activation of G&#945;q69,70. Once activated by its tethered ligand (or a suitable exogenous ligand), PAR1 undergoes a conformational change which causes guanosine diphosphate (GDP) bound to the G&#945;q subunit to be replaced by guanosine triphosphate (GTP)68. The G&#945;q subunit then activates phospholipase C&#946; (PLC-&#946;), which catalyzes the hydrolysis of phosphatidylinositol 4,5 bisphosphate (PIP2), forming 1,4,5-inositol triphosphate (IP3) and diacylglycerol (DAG). Finally, IP3 binds to IP3-sensitive Ca2+ channels in the membrane of the endoplasmic reticulum, allowing Ca2+ to be released into the cytoplasm, where it can bind to Ca2+-dependent fluorescent dyes, such as Fluo-4, that are added to the cells71.&#160;This process occurs within seconds and can increase the concentration of Ca2+ 100-fold, leading to a drastic change in the amount of calcium-bound dye and a robust fluorescence signal.
In 2018, the Dockendorff group disclosed a medium-throughput Ca2+ mobilization assay that could be used to identify antagonists of the G&#945;q pathway of PAR172. The assay used&#160;EA.hy92673, a hybrid human endothelial cell line, which can be used for multiple passages without a noticeable change in PAR1 expression, and is established for in vitro measurements of cytoprotective effects.&#160;
The original protocol used EA.hy926 cells in 96-well plates and loaded with Fluo-4/AM dye, which was chosen due to its intense fluorescence at 488 nm and high cell permeability. Once the dye was loaded into the cells, lengthy washing steps were performed with an automated 8-channel liquid handler (faster methods of liquid handling, such as a 96-channel washer, were inaccessible). The reproducibility of this assay was superior to that without the careful, automated robotic media changes. Antagonists were then incubated with the cells, PAR1 was activated through the sequential addition of a selective agonist (16 wells at a time), and changes in fluorescence resulting from calcium mobilization and dye binding were measured to determine activity.
While this protocol allows for the measurement of PAR1-mediated calcium mobilization, it is limited by the time required to assay each 96-well plate. Long experiment times are problematic not only because the number of compounds that can be screened each day is limited, but also because dye efflux occurs over time, narrowing the assay window by increasing the basal fluorescence. One contributor to the long experiment time is the use of an 8-channel liquid handler for plate washing, which adds over 30 min to each experiment. The required tips also became difficult to obtain due to supply chain problems. Here an updated protocol for the PAR-mediated calcium mobilization assay that does not require a liquid handler, and therefore can be run in higher throughput, is reported. This protocol should also be suitable for measuring signaling with other GPCRs that lead to intracellular calcium mobilization.&#160;This updated plate reader protocol&#160;is ideal for academic and small industrial labs that do not have the resources for expensive cell imaging instruments but have a need to rapidly screen numerous compounds. For an example of a calcium mobilization assay using a plate imager, see Caers et al.74.

<meta charset="utf8"></head><body>Autor em destaque: Desenvolvimento de parmodulinas para direcionar receptores ativados por protease para controle da inflamação

Caracterização de moduladores de receptores ativados por protease com um ensaio de mobilização de cálcio usando um leitor de placas

Changes in calcium concentration in cells are rapidly monitored in a high-throughput fashion with the use of intracellular, fluorescent, calcium-binding ...

characterizing-modulators-protease-activated-receptors-with-calcium

Research

JoVE Journal

Biochemistry

Characterizing Modulators of Protease-Activated Receptors with a Calcium Mobilization Assay Using a Plate Reader

283 visualizações.  Function Therapeutics. Nosso laboratório está trabalhando para entender como a modulação dos receptores ativados por protease pode inibir a inflamação. Desenvolvemos uma nova classe de pequenas moléculas chamadas parmodulinas que modulam a atividade de PAR1. O objetivo é descobrir parmodulinas com propriedades melhoradas para uso potencial como candidatos a fármacos, e também entender seu modo de ação.Em estudos pré-clínicos com nossos colaboradores, determinam...

Vídeo: Autor em destaque: Desenvolvimento de parmodulinas para direcionar receptores ativados por protease para controle da inflamação

Changes in calcium concentration in cells are rapidly monitored in a high-throughput fashion with the use of intracellular, fluorescent, calcium-binding dyes and imaging instruments that can measure fluorescent emissions from up to 1,536 wells simultaneously. However, these instruments are much more expensive and can be challenging to maintain relative to widely available plate readers that scan wells individually. Described here is an optimized plate reader assay for use with an endothelial cell line (EA.hy926) to measure the protease-activated receptor (PAR)-driven activation of G&#945;q signaling and subsequent calcium mobilization using the calcium-binding dye Fluo-4. This assay has been used to characterize a range of PAR ligands, including the allosteric PAR1-targeting anti-inflammatory "parmodulin" ligands identified in the Dockendorff lab. This protocol obviates the need for an automated liquid handler and permits the medium-throughput screening of PAR ligands in 96-well plates and should be applicable to the study of other receptors that initiate calcium mobilization.

An improved protocol for a calcium mobilization assay with endothelial cells, used to identify ligands of protease-activated receptors (PARs), has been developed. The new protocol reduces total assay time by 90-120 min and yields reproducible concentration-response curves.