precision-milling-carbon-nanotube-forests-using-low-pressure-scanning

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy

A nanoscale fabrication technique appropriate for milling carbon nanotube (CNT) forests is described. The technique utilizes an environmental scanning ...

University of Missouri

Small diameter carbon nanotube (CNTs) are synthesized directly from a parent CNT forest using a floating catalyst chemical vapor deposition (CVD) method. To support a new CNT generation from an existing forest, an alumina coating was applied to the CNT forest using atomic layer deposition (ALD). The new generation of small diameter CNTs (8 nm average) surround the first generation, filling the interstitial regions. The hierarchical forests exhibit a 5-10-fold increase in stiffness, and the two generations are electrically addressable in spite of the interfacial alumina layer between them. This work enables the design of complex CNT architectures with hierarchical features that bring tailored properties such as high specific surface area and robust mechanical properties that can benefit a range of applications.

Benjamin F. Davis

Department of Mechanical & Aerospace Engineering

University of Missouri

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy

Benjamin F. Davis

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Mechanical & Aerospace Engineering

University of Missouri

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy

Department of Mechanical & Aerospace Engineering