JoVE Logo
АВТОРЫ
СВЯЖИТЕСЬ С НАМИ

Войдите в систему

Core - Civil Engineering

    Chapter 21

    Flow in Pipes

    21.1 : General Characteristics of Pipe Flow I01:22

    21.1 : General Characteristics of Pipe Flow I

    Pipe flow describes fluid movement through enclosed, fully-filled conduits, typically cylindrical pipes like water pipes or hydraulic hoses, engineered to ...

    819 views
    21.2 : General Characteristics of Pipe Flow II01:24

    21.2 : General Characteristics of Pipe Flow II

    As fluid enters a pipe, it first flows through an entrance region where the velocity profile adjusts, forming a boundary layer along the walls. This ...

    767 views
    21.3 : Laminar Flow01:27

    21.3 : Laminar Flow

    Laminar flow refers to the smooth, orderly motion of fluid particles in which each particle follows parallel paths with minimal mixing between layers. The ...

    713 views
    21.4 : Laminar Flow: Problem Solving01:24

    21.4 : Laminar Flow: Problem Solving

    Consider air flowing through the pipe at 300 Kelvin at standard atmospheric pressure, with a mass flowrate of 0.0163 kilograms per second. If the flow is ...

    124 views
    21.5 : Turbulent Flow01:24

    21.5 : Turbulent Flow

    Turbulent flow is a fluid movement marked by chaotic shifts in pressure and velocity. Unlike laminar flow, turbulent flow displays complex, irregular ...

    147 views
    21.6 : Turbulent Flow: Problem Solving01:09

    21.6 : Turbulent Flow: Problem Solving

    Consider a liquid that needs to be carbonated. Both the liquid and the carbon dioxide gas are cooled. The temperature is selected as 20 degrees Celsius to ...

    96 views
    21.7 : Major Losses in Pipes01:28

    21.7 : Major Losses in Pipes

    Consider  a fluid flowing through a pipe; it encounters frictional resistance, causing energy losses known as major losses, resulting in a pressure ...

    746 views
    21.8 : Minor Losses in Pipes01:25

    21.8 : Minor Losses in Pipes

    Minor losses in pipe systems arise from components like valves, bends, and fittings that disrupt fluid flow, causing energy dissipation through turbulence ...

    706 views
    21.9 : Single Pipe Systems01:24

    21.9 : Single Pipe Systems

    In pipe flow problems, scenarios are grouped by known information and desired calculation and are typically classified as Type I, II, or III. In a Type I ...

    108 views
    21.10 : Multiple Pipe Systems01:21

    21.10 : Multiple Pipe Systems

    Multiple pipe systems consist of interconnected pipes that regulate fluid flow across complex networks. They can be arranged in series, parallel, loop, or ...

    479 views
    21.11 : Pipe Flowrate Measurement01:28

    21.11 : Pipe Flowrate Measurement

    Flow measurement devices—such as orifice, nozzle, and Venturimeters—operate by narrowing the flow area. This increases fluid velocity and ...

    397 views
    21.12 : Pipe Flowrate Measurement: Problem Solving01:28

    21.12 : Pipe Flowrate Measurement: Problem Solving

    Consider a spray tank system designed to evenly apply pest-control liquid to plants. The system includes a pressurized tank at 150 kPa filled with ...

    351 views
    21.13 : Design Example: Designing a Residential Plumbing System01:25

    21.13 : Design Example: Designing a Residential Plumbing System

    The residential plumbing system is designed by assessing the building's water demand and flow rate needs based on occupancy and fixture requirements. ...

    427 views
    JoVE Logo

    Конфиденциальность

    Условия эксплуатации

    Политика

    СВЯЖИТЕСЬ С НАМИ

    РЕКОМЕНДОВАТЬ БИБЛИОТЕКЕ

    НОВОСТИ JoVE

    Исследования

    Образование

    АВТОРЫ

    Библиотекарь

    О JoVE

    Авторские права © 2025 MyJoVE Corporation. Все права защищены