JoVE Logo
АВТОРЫ
СВЯЖИТЕСЬ С НАМИ

Войдите в систему

Core - Electrical Engineering

    Chapter 2

    DC Circuit Analysis

    2.1 : Nodal Analysis01:10

    2.1 : Nodal Analysis

    Nodal analysis is a general method for simplifying circuit analysis by using node voltages as circuit variables. Consider a circuit with three nodes and ...

    822 views
    2.2 : Nodal Analysis with Voltage Sources01:11

    2.2 : Nodal Analysis with Voltage Sources

    Nodal analysis is a remarkably effective method used in electrical engineering to simplify the analysis of complex circuits, including those with ...

    993 views
    2.3 : Mesh Analysis01:20

    2.3 : Mesh Analysis

    Mesh analysis is a convenient method that employs mesh currents as circuit variables, effectively reducing the number of simultaneous equations involved ...

    557 views
    2.4 : Mesh Analysis with Current Sources01:10

    2.4 : Mesh Analysis with Current Sources

    Mesh analysis is simpler in circuits with current sources because they require fewer equations for analysis. Consider a two-mesh circuit with a current ...

    1.2K views
    2.5 : Source Transformation01:15

    2.5 : Source Transformation

    Source transformation is a fundamental technique employed in circuit analysis, offering a valuable tool for simplifying complex electrical circuits. This ...

    3.8K views
    2.6 : Linear Circuits01:17

    2.6 : Linear Circuits

    Consider a resistor connected to a variable voltage source. As the voltage is increased, the corresponding current value is recorded. The graphical ...

    383 views
    2.7 : Superposition Theorem01:18

    2.7 : Superposition Theorem

    The superposition theorem is used in circuits with multiple independent sources. To apply this theorem, keep one independent source at a time while ...

    556 views
    2.8 : Thevinin's Theorem01:15

    2.8 : Thevinin's Theorem

    Thevenin's theorem states that any linear two-terminal circuit can be replaced by an equivalent circuit with a single voltage source in series with a ...

    513 views
    2.9 : Norton's Theorem01:14

    2.9 : Norton's Theorem

    Norton's theorem states that any linear two-terminal circuit can be replaced by an equivalent circuit consisting of a single current source in ...

    523 views
    2.10 : Maximum Power Transfer01:16

    2.10 : Maximum Power Transfer

    In practical applications, a circuit is designed to deliver maximum power from a source to a load. A Thevenin equivalent circuit can determine the maximum ...

    231 views
    2.11 : Design Example: Strain Gauge Bridge or Wheatstone Bridge01:15

    2.11 : Design Example: Strain Gauge Bridge or Wheatstone Bridge

    A strain gauge, a transducer that converts mechanical strain into electrical signals, is often used to measure force. The engineer's role involves ...

    352 views
    JoVE Logo

    Конфиденциальность

    Условия эксплуатации

    Политика

    СВЯЖИТЕСЬ С НАМИ

    РЕКОМЕНДОВАТЬ БИБЛИОТЕКЕ

    НОВОСТИ JoVE

    Исследования

    Образование

    АВТОРЫ

    Библиотекарь

    О JoVE

    Авторские права © 2025 MyJoVE Corporation. Все права защищены