Consider a hydraulic hoist supporting a load of 1 kN. Assuming a simplified schematic representation of this frame structure, the force acting on BD and BF members can be determined.
The member dimensions and the weight of the load are known parameters. This structure can be considered a frame with BF and BD acting as two-force members, while EFG and EDC are multi-force members.
A free-body diagram for the member EFG is considered. The inclined force FBF can be resolved into the vertical and horizontal components. The moment equilibrium condition is applied to joint E.
The force FBF is calculated to be 1.546 kN. Then, the horizontal force equilibrium condition is applied at joint E.
Substituting the value of the horizontal component of FBF into the equilibrium equation, the horizontal reaction force at E is calculated as 0.375 kN. Similarly, the vertical force equilibrium condition is applied.
The calculated vertical reaction force at joint E is 0.500 kN.
Now, a free-body diagram for the member EDC is considered. The horizontal and vertical components of FBD can be expressed using a slope triangle. The moment equilibrium condition at point C is applied.
The force FBD is calculated as 1.677 kN.
Из главы 6:
Now Playing
Structural Analysis
162 Просмотры
Structural Analysis
914 Просмотры
Structural Analysis
1.5K Просмотры
Structural Analysis
644 Просмотры
Structural Analysis
939 Просмотры
Structural Analysis
439 Просмотры
Structural Analysis
1.2K Просмотры
Structural Analysis
509 Просмотры
Structural Analysis
435 Просмотры
Structural Analysis
832 Просмотры
Structural Analysis
710 Просмотры
Structural Analysis
523 Просмотры
Structural Analysis
473 Просмотры
Structural Analysis
355 Просмотры
Structural Analysis
215 Просмотры
See More
Авторские права © 2025 MyJoVE Corporation. Все права защищены