Войдите в систему

Precipitation and coprecipitation methods can be used to separate a mixture of ions in a solution. In qualitative inorganic analysis, ions that form sparingly soluble precipitates with the same reagent are separated based on the differences in solubility products. For example, consider the separation of Cu(II) and Fe(II) ions by precipitation as insoluble sulfides. First, copper(II) sulfide is precipitated by the addition of acidic H2S, where the dissociation of H2S is suppressed. Adding H2S increases the product of sulfide ion and copper ion concentrations. When this product exceeds the solubility product of copper(II) sulfide, precipitation occurs. On the other hand, H2S alone cannot be used to precipitate iron(II) sulfide because its solubility product is higher than that of copper(II) sulfide. Successful precipitation of FeS requires the addition of aqueous ammonia.

Coprecipitation is a method used to remove otherwise soluble contaminants by using a substance that can coprecipitate with the contaminants. This technique can be used to isolate trace components from a solution. For instance, the tendency of arsenic to coprecipitate with ferric hydroxide is exploited in a process called gathering. During this process, Fe(II) or solid iron particles are added to water contaminated by arsenic. The iron particles are then oxidized for several hours to obtain ferric hydroxide precipitates, which now contain arsenic. Finally, the arsenic-bearing precipitate is removed by repetitive filtration to produce safe drinking water.

Теги
PrecipitationCo precipitationQualitative Inorganic AnalysisIon SeparationInsoluble SulfidesCopper II SulfideIron II SulfideSolubility ProductH2SAqueous AmmoniaArsenic RemovalFerric HydroxideTrace Component IsolationDrinking Water Purification

Из главы 4:

article

Now Playing

4.8 : Precipitation and Co-precipitation

Introduction to Separation Methods

1.5K Просмотры

article

4.1 : States of Matter and Phase Changes

Introduction to Separation Methods

830 Просмотры

article

4.2 : Distillation: Vapor–Liquid Equilibria

Introduction to Separation Methods

2.5K Просмотры

article

4.3 : Filtration

Introduction to Separation Methods

673 Просмотры

article

4.4 : Centrifugation

Introduction to Separation Methods

1.9K Просмотры

article

4.5 : Sublimation

Introduction to Separation Methods

648 Просмотры

article

4.6 : Recrystallization: Solid–Solution Equilibria

Introduction to Separation Methods

950 Просмотры

article

4.7 : Crystal Growth: Principles of Crystallization

Introduction to Separation Methods

1.3K Просмотры

article

4.9 : Coagulation

Introduction to Separation Methods

226 Просмотры

article

4.10 : Electrodeposition

Introduction to Separation Methods

344 Просмотры

article

4.11 : Extraction: Partition and Distribution Coefficients

Introduction to Separation Methods

1.4K Просмотры

article

4.12 : Extraction: Effects of pH

Introduction to Separation Methods

301 Просмотры

article

4.13 : Extraction: Advanced Methods

Introduction to Separation Methods

278 Просмотры

article

4.14 : Chromatography: Introduction

Introduction to Separation Methods

2.5K Просмотры

article

4.15 : Dialysis

Introduction to Separation Methods

503 Просмотры

See More

JoVE Logo

Исследования

Образование

О JoVE

Авторские права © 2025 MyJoVE Corporation. Все права защищены