Two key frameworks are employed to analyze mass, energy, and momentum transfer: the control volume approach and the system approach. These frameworks offer different perspectives, depending on whether the focus is on a specific region in space (control volume approach) or a defined mass of fluid (system approach).

The control volume approach considers a stationary region in space through which fluid flows. This region is bounded by a control surface. For instance, in the case of water flowing through a pipe, the control volume would be a fixed section of the pipe, and the control surface would be the boundary of this section. This framework simplifies the analysis of fluid flow by applying conservation laws for mass, energy, and momentum across the control volume. The key advantage is that it focuses on the macroscopic properties of the fluid without requiring tracking of individual fluid particles. As water enters and exits the control volume, the changes in its flow characteristics are assessed at the boundaries of the control surface, making it a powerful tool for studying steady or unsteady flow conditions.

The system approach, by contrast, is concerned with a fixed mass of fluid that is tracked over time. A practical example of this is water in a tank. The water inside the tank represents a system, and as it drains or fills, the same mass of water is analyzed. The system's behavior is studied as external forces and energy transfers cause changes in the fluid's state. This approach is particularly useful when analyzing thermodynamic processes where the exact mass and its energy or momentum content are critical, such as in closed-system heat transfer or phase change scenarios.

While the control volume is fixed in space and focuses on the exchange of quantities through its surface, the system approach tracks the evolution of a specific mass of fluid. These methodologies are complementary, offering flexibility in fluid dynamics and thermodynamic analysis.

Из главы 17:

article

Now Playing

17.4 : Control Volume and System Representations

Fluid Kinematics

17 Просмотры

article

17.1 : Описания эйлеровых и лагранжевых течений

Fluid Kinematics

41 Просмотры

article

17.2 : Введение в типы потоков

Fluid Kinematics

20 Просмотры

article

17.3 : Линии тока, полосы и контуры

Fluid Kinematics

25 Просмотры

article

17.5 : Скорость и ускорение в установившемся и нестационарном потоке

Fluid Kinematics

18 Просмотры

article

17.6 : Теорема Рейнольдса о транспорте

Fluid Kinematics

20 Просмотры

article

17.7 : Пример конструкции: Протекание через огнетушитель

Fluid Kinematics

23 Просмотры

JoVE Logo

Исследования

Образование

О JoVE

Авторские права © 2025 MyJoVE Corporation. Все права защищены