Veneer refers to a thin sheet of wood, typically produced to a thickness of about one-eighth of an inch or less. This material is crafted through various methods, the most common being rotary cutting. In this process, a log is mounted into a large lathe and spun against a knife edge, peeling off a continuous strip of wood as the knife penetrates deeper into the rotating log, creating a rotary-cut veneer.

Other veneering techniques include plain-slicing, quarter-slicing, and rift-slicing. These methods start with preparing a segment of the log called a flitch, which is sawn to the desired size. The flitch is then fixed horizontally against a movable frame. Adjacent to this, a horizontal veneer knife slices through the flitch as the frame moves downward, producing a thin sheet of veneer. After each slice, the knife advances closer to the flitch by the thickness of one veneer slice, ensuring consistent thickness across sheets.

Veneers are extensively used in various applications due to their aesthetic appeal and versatility. They are commonly utilized in fine paneling, cabinetry, wood flooring, furniture making, and the manufacturing of other wood products. These uses highlight the veneer's ability to provide a desirable wood finish while also maximizing the utility of timber by minimizing waste.

Tags
VeneerRotary CuttingVeneering TechniquesPlain slicingQuarter slicingRift slicingFlitchHorizontal Veneer KnifeWood ProductsAesthetic AppealCabinetryWood FlooringFurniture MakingTimber Utility

From Chapter 3:

article

Now Playing

3.9 : Veneer

Wood

48 Views

article

3.1 : Introduction to Wood

Wood

163 Views

article

3.2 : Softwoods and Hardwoods

Wood

110 Views

article

3.3 : Lumber

Wood

64 Views

article

3.4 : Structural Properties and Dimensions of Lumber

Wood

55 Views

article

3.5 : Seasoning of Wood

Wood

63 Views

article

3.6 : Wood Surfacing

Wood

58 Views

article

3.7 : Lumber Defects

Wood

51 Views

article

3.8 : Wood Fasteners

Wood

69 Views

article

3.10 : Wood Products

Wood

57 Views

article

3.11 : Wood Panel Products

Wood

52 Views

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved