Oturum Aç

Politecnico di Torino

3 ARTICLES PUBLISHED IN JoVE

Chemistry

Synthesis and Characterization of Fe-doped Aluminosilicate Nanotubes with Enhanced Electron Conductive Properties

Ehsan Shafia¹, Serena Esposito², Elnaz Bahadori¹, Marco Armandi^1,3, Maela Manzoli⁴, Barbara Bonelli^1,3,5

¹Department of Applied Science and Technology, Politecnico di Torino, ²Department of Civil and Mechanical Engineering, Università degli Studi di Cassino e del Lazio Meridionale, ³Institute of Chemistry, Politecnico di Torino, ⁴Department of Chemistry & NIS Interdepartmental Centre, University of Turin, ⁵INSTM Unit of Torino-Politecnico, Politecnico di Torino

Here, we present a protocol to synthesize and characterize Fe-doped aluminosilicate nanotubes. The materials are obtained by either sol-gel synthesis upon addition of FeCl₃•6H₂O to the mixture containing the Si and Al precursors or by post-synthesis ionic exchange of preformed aluminosilicate nanotubes.

Engineering

Production of Single Tracks of Ti-6Al-4V by Directed Energy Deposition to Determine the Layer Thickness for Multilayer Deposition

Abdollah Saboori¹, Simona Tusacciu², Mattia Busatto², Manuel Lai², Sara Biamino¹, Paolo Fino¹, Mariangela Lombardi¹

¹Department of Applied Science and Technology, Politecnico di Torino, ²IRIS S.r.l.

In this research, a rapid method based on melt pool characterization is developed to estimate the layer thickness of Ti-6Al-4V components produced by directed energy deposition.

Bioengineering

Bioinspired Soft Robot with Incorporated Microelectrodes

Ting Wang^1,2, Bianca Migliori^1,3, Beatrice Miccoli^1,4, Su Ryon Shin¹

¹Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, ²School of Medicine, Jiangsu University, ³Tech4Health and Neuroscience Institutes, NYU Langone Health, ⁴Department of Electronics and Telecommunication, Politecnico di Torino

A bioinspired scaffold is fabricated by a soft photolithography technique using mechanically robust and electrically conductive hydrogels. The micropatterned hydrogels provide directional cardiomyocyte cell alignment, resulting in a tailored direction of actuation. Flexible microelectrodes are also integrated into the scaffold to bring electrical controllability for a self-actuating cardiac tissue.